Technical Specifications
Parameters and characteristics commom to parts in this series
Specification | CD74HC4316PWRG4 | 74HC4316 Series |
---|---|---|
-3db Bandwidth | 200 MHz | 200 MHz |
Channel-to-Channel Matching (ΔRon) | 5 Ohm | 5 Ohm |
Current - Leakage (IS(off)) (Max) [Max] | 100 nA | 100 nA |
Mounting Type | Surface Mount | Surface Mount, Through Hole |
Multiplexer/Demultiplexer Circuit | 1:1 | 1:1 |
Number of Circuits | 4 | 4 |
On-State Resistance (Max) [Max] | 170 Ohm | 170 Ohm |
Operating Temperature [Max] | 125 °C | 125 °C |
Operating Temperature [Min] | -55 C | -55 C |
Package / Case | 16-TSSOP | 16-TSSOP, 16-SOIC (0.209", 5.30mm Width), 16-SOIC, 16-DIP |
Package / Case | - | 0.154 - 7.62 mm Width |
Package / Case [x] | 0.173 " | 0.173 " |
Package / Case [x] | 4.4 mm | 4.4 mm |
Supplier Device Package | 16-TSSOP | 16-TSSOP, 16-SO, 16-SOIC, 16-PDIP |
Switch Circuit | SPST - NO | SPST - NO |
Switch Time (Ton, Toff) (Max) [custom] | 37 ns | 37 ns |
Switch Time (Ton, Toff) (Max) [custom] | 37 ns | 37 ns |
Voltage - Supply, Dual (V±) [Max] | 5 V | 5 V |
Voltage - Supply, Dual (V±) [Min] | -1 V | -1 V |
Voltage - Supply, Single (V+) [Max] | 6 V | 6 V |
Voltage - Supply, Single (V+) [Min] | 2 V | 2 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
74HC4316 Series
IC SW SPST-NOX4 170OHM 16TSSOP
Part | Mounting Type | Voltage - Supply, Single (V+) [Min] | Voltage - Supply, Single (V+) [Max] | -3db Bandwidth | Voltage - Supply, Dual (V±) [Min] | Voltage - Supply, Dual (V±) [Max] | Switch Circuit | On-State Resistance (Max) [Max] | Package / Case [x] | Package / Case | Package / Case [x] | Channel-to-Channel Matching (ΔRon) | Number of Circuits | Current - Leakage (IS(off)) (Max) [Max] | Multiplexer/Demultiplexer Circuit | Switch Time (Ton, Toff) (Max) [custom] | Switch Time (Ton, Toff) (Max) [custom] | Supplier Device Package | Operating Temperature [Min] | Operating Temperature [Max] | Package / Case |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Surface Mount | 2 V | 6 V | 200 MHz | -1 V | 5 V | SPST - NO | 170 Ohm | 0.173 " | 16-TSSOP | 4.4 mm | 5 Ohm | 4 | 100 nA | 1:1 | 37 ns | 37 ns | 16-TSSOP | -55 C | 125 °C | ||
Texas Instruments CD74HC4316NSRThe ’HC4316 and CD74HCT4316 contain four independent digitally controlled analog switches that use silicon-gate CMOS technology to achieve operating speeds similar to LSTTL with the low power consumption of standard CMOS integrated circuits.
In addition these devices contain logic-level translation circuits that provide for analog signal switching of voltages between ±5V via 5V logic. Each switch is turned on by a high-level voltage on its select input (S) when the common Enable (E) is Low. A High E disables all switches. The digital inputs can swing between VCC and GND; the analog inputs/outputs can swing between VCC as a positive limit and VEE as a negative limit. Voltage ranges are shown in Figure 13-1 and Figure 13-2.
The ’HC4316 and CD74HCT4316 contain four independent digitally controlled analog switches that use silicon-gate CMOS technology to achieve operating speeds similar to LSTTL with the low power consumption of standard CMOS integrated circuits.
In addition these devices contain logic-level translation circuits that provide for analog signal switching of voltages between ±5V via 5V logic. Each switch is turned on by a high-level voltage on its select input (S) when the common Enable (E) is Low. A High E disables all switches. The digital inputs can swing between VCC and GND; the analog inputs/outputs can swing between VCC as a positive limit and VEE as a negative limit. Voltage ranges are shown in Figure 13-1 and Figure 13-2. | Surface Mount | 2 V | 6 V | 200 MHz | -1 V | 5 V | SPST - NO | 170 Ohm | 16-SOIC (0.209", 5.30mm Width) | 5 Ohm | 4 | 100 nA | 1:1 | 37 ns | 37 ns | 16-SO | -55 C | 125 °C | |||
Texas Instruments CD74HC4316MThe ’HC4316 and CD74HCT4316 contain four independent digitally controlled analog switches that use silicon-gate CMOS technology to achieve operating speeds similar to LSTTL with the low power consumption of standard CMOS integrated circuits.
In addition these devices contain logic-level translation circuits that provide for analog signal switching of voltages between ±5V via 5V logic. Each switch is turned on by a high-level voltage on its select input (S) when the common Enable (E) is Low. A High E disables all switches. The digital inputs can swing between VCC and GND; the analog inputs/outputs can swing between VCC as a positive limit and VEE as a negative limit. Voltage ranges are shown in Figure 13-1 and Figure 13-2.
The ’HC4316 and CD74HCT4316 contain four independent digitally controlled analog switches that use silicon-gate CMOS technology to achieve operating speeds similar to LSTTL with the low power consumption of standard CMOS integrated circuits.
In addition these devices contain logic-level translation circuits that provide for analog signal switching of voltages between ±5V via 5V logic. Each switch is turned on by a high-level voltage on its select input (S) when the common Enable (E) is Low. A High E disables all switches. The digital inputs can swing between VCC and GND; the analog inputs/outputs can swing between VCC as a positive limit and VEE as a negative limit. Voltage ranges are shown in Figure 13-1 and Figure 13-2. | Surface Mount | 2 V | 6 V | 200 MHz | -1 V | 5 V | SPST - NO | 170 Ohm | 16-SOIC | 5 Ohm | 4 | 100 nA | 1:1 | 37 ns | 37 ns | 16-SOIC | -55 C | 125 °C | 0.154 in, 3.9 mm Width | ||
Texas Instruments CD74HC4316PWRThe ’HC4316 and CD74HCT4316 contain four independent digitally controlled analog switches that use silicon-gate CMOS technology to achieve operating speeds similar to LSTTL with the low power consumption of standard CMOS integrated circuits.
In addition these devices contain logic-level translation circuits that provide for analog signal switching of voltages between ±5V via 5V logic. Each switch is turned on by a high-level voltage on its select input (S) when the common Enable (E) is Low. A High E disables all switches. The digital inputs can swing between VCC and GND; the analog inputs/outputs can swing between VCC as a positive limit and VEE as a negative limit. Voltage ranges are shown in Figure 13-1 and Figure 13-2.
The ’HC4316 and CD74HCT4316 contain four independent digitally controlled analog switches that use silicon-gate CMOS technology to achieve operating speeds similar to LSTTL with the low power consumption of standard CMOS integrated circuits.
In addition these devices contain logic-level translation circuits that provide for analog signal switching of voltages between ±5V via 5V logic. Each switch is turned on by a high-level voltage on its select input (S) when the common Enable (E) is Low. A High E disables all switches. The digital inputs can swing between VCC and GND; the analog inputs/outputs can swing between VCC as a positive limit and VEE as a negative limit. Voltage ranges are shown in Figure 13-1 and Figure 13-2. | Surface Mount | 2 V | 6 V | 200 MHz | -1 V | 5 V | SPST - NO | 170 Ohm | 0.173 " | 16-TSSOP | 4.4 mm | 5 Ohm | 4 | 100 nA | 1:1 | 37 ns | 37 ns | 16-TSSOP | -55 C | 125 °C | |
Texas Instruments CD74HC4316EThe ’HC4316 and CD74HCT4316 contain four independent digitally controlled analog switches that use silicon-gate CMOS technology to achieve operating speeds similar to LSTTL with the low power consumption of standard CMOS integrated circuits.
In addition these devices contain logic-level translation circuits that provide for analog signal switching of voltages between ±5V via 5V logic. Each switch is turned on by a high-level voltage on its select input (S) when the common Enable (E) is Low. A High E disables all switches. The digital inputs can swing between VCC and GND; the analog inputs/outputs can swing between VCC as a positive limit and VEE as a negative limit. Voltage ranges are shown in Figure 13-1 and Figure 13-2.
The ’HC4316 and CD74HCT4316 contain four independent digitally controlled analog switches that use silicon-gate CMOS technology to achieve operating speeds similar to LSTTL with the low power consumption of standard CMOS integrated circuits.
In addition these devices contain logic-level translation circuits that provide for analog signal switching of voltages between ±5V via 5V logic. Each switch is turned on by a high-level voltage on its select input (S) when the common Enable (E) is Low. A High E disables all switches. The digital inputs can swing between VCC and GND; the analog inputs/outputs can swing between VCC as a positive limit and VEE as a negative limit. Voltage ranges are shown in Figure 13-1 and Figure 13-2. | Through Hole | 2 V | 6 V | 200 MHz | -1 V | 5 V | SPST - NO | 170 Ohm | 16-DIP | 5 Ohm | 4 | 100 nA | 1:1 | 37 ns | 37 ns | 16-PDIP | -55 C | 125 °C | 0.3 in, 7.62 mm | ||
Surface Mount | 2 V | 6 V | 200 MHz | -1 V | 5 V | SPST - NO | 170 Ohm | 16-SOIC | 5 Ohm | 4 | 100 nA | 1:1 | 37 ns | 37 ns | 16-SOIC | -55 C | 125 °C | 0.154 in, 3.9 mm Width | |||
Through Hole | 2 V | 6 V | 200 MHz | -1 V | 5 V | SPST - NO | 170 Ohm | 16-DIP | 5 Ohm | 4 | 100 nA | 1:1 | 37 ns | 37 ns | 16-PDIP | -55 C | 125 °C | 0.3 in, 7.62 mm | |||
Surface Mount | 2 V | 6 V | 200 MHz | -1 V | 5 V | SPST - NO | 170 Ohm | 16-SOIC | 5 Ohm | 4 | 100 nA | 1:1 | 37 ns | 37 ns | 16-SOIC | -55 C | 125 °C | 0.154 in, 3.9 mm Width | |||
Texas Instruments CD74HC4316M96The ’HC4316 and CD74HCT4316 contain four independent digitally controlled analog switches that use silicon-gate CMOS technology to achieve operating speeds similar to LSTTL with the low power consumption of standard CMOS integrated circuits.
In addition these devices contain logic-level translation circuits that provide for analog signal switching of voltages between ±5V via 5V logic. Each switch is turned on by a high-level voltage on its select input (S) when the common Enable (E) is Low. A High E disables all switches. The digital inputs can swing between VCC and GND; the analog inputs/outputs can swing between VCC as a positive limit and VEE as a negative limit. Voltage ranges are shown in Figure 13-1 and Figure 13-2.
The ’HC4316 and CD74HCT4316 contain four independent digitally controlled analog switches that use silicon-gate CMOS technology to achieve operating speeds similar to LSTTL with the low power consumption of standard CMOS integrated circuits.
In addition these devices contain logic-level translation circuits that provide for analog signal switching of voltages between ±5V via 5V logic. Each switch is turned on by a high-level voltage on its select input (S) when the common Enable (E) is Low. A High E disables all switches. The digital inputs can swing between VCC and GND; the analog inputs/outputs can swing between VCC as a positive limit and VEE as a negative limit. Voltage ranges are shown in Figure 13-1 and Figure 13-2. | Surface Mount | 2 V | 6 V | 200 MHz | -1 V | 5 V | SPST - NO | 170 Ohm | 16-SOIC | 5 Ohm | 4 | 100 nA | 1:1 | 37 ns | 37 ns | 16-SOIC | -55 C | 125 °C | 0.154 in, 3.9 mm Width | ||
Texas Instruments CD74HC4316PWThe ’HC4316 and CD74HCT4316 contain four independent digitally controlled analog switches that use silicon-gate CMOS technology to achieve operating speeds similar to LSTTL with the low power consumption of standard CMOS integrated circuits.
In addition these devices contain logic-level translation circuits that provide for analog signal switching of voltages between ±5V via 5V logic. Each switch is turned on by a high-level voltage on its select input (S) when the common Enable (E) is Low. A High E disables all switches. The digital inputs can swing between VCC and GND; the analog inputs/outputs can swing between VCC as a positive limit and VEE as a negative limit. Voltage ranges are shown in Figure 13-1 and Figure 13-2.
The ’HC4316 and CD74HCT4316 contain four independent digitally controlled analog switches that use silicon-gate CMOS technology to achieve operating speeds similar to LSTTL with the low power consumption of standard CMOS integrated circuits.
In addition these devices contain logic-level translation circuits that provide for analog signal switching of voltages between ±5V via 5V logic. Each switch is turned on by a high-level voltage on its select input (S) when the common Enable (E) is Low. A High E disables all switches. The digital inputs can swing between VCC and GND; the analog inputs/outputs can swing between VCC as a positive limit and VEE as a negative limit. Voltage ranges are shown in Figure 13-1 and Figure 13-2. | Surface Mount | 2 V | 6 V | 200 MHz | -1 V | 5 V | SPST - NO | 170 Ohm | 0.173 " | 16-TSSOP | 4.4 mm | 5 Ohm | 4 | 100 nA | 1:1 | 37 ns | 37 ns | 16-TSSOP | -55 C | 125 °C | |
Surface Mount | 2 V | 6 V | 200 MHz | -1 V | 5 V | SPST - NO | 170 Ohm | 0.173 " | 16-TSSOP | 4.4 mm | 5 Ohm | 4 | 100 nA | 1:1 | 37 ns | 37 ns | 16-TSSOP | -55 C | 125 °C | ||
Surface Mount | 2 V | 6 V | 200 MHz | -1 V | 5 V | SPST - NO | 170 Ohm | 16-SOIC | 5 Ohm | 4 | 100 nA | 1:1 | 37 ns | 37 ns | 16-SOIC | -55 C | 125 °C | 0.154 in, 3.9 mm Width | |||
Surface Mount | 2 V | 6 V | 200 MHz | -1 V | 5 V | SPST - NO | 170 Ohm | 0.173 " | 16-TSSOP | 4.4 mm | 5 Ohm | 4 | 100 nA | 1:1 | 37 ns | 37 ns | 16-TSSOP | -55 C | 125 °C |
Description
General part information
74HC4316 Series
4 Circuit IC Switch 1:1 170Ohm 16-TSSOP