TPS22811LRPWR
Active2.7-V TO 16-V, 10-A, 6-MΩ LOAD SWITCH WITH FAST OVERVOLTAGE PROTECTION AND CURRENT MONITORING
Deep-Dive with AI
Search across all available documentation for this part.
TPS22811LRPWR
Active2.7-V TO 16-V, 10-A, 6-MΩ LOAD SWITCH WITH FAST OVERVOLTAGE PROTECTION AND CURRENT MONITORING
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS22811LRPWR |
|---|---|
| Current - Output (Max) [Max] | 10 A |
| Fault Protection | UVLO, Over Voltage, Over Temperature, Short Circuit, Current Limiting (Fixed) |
| Features | Slew Rate Controlled |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 125 ¯C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | High Side |
| Output Type | N-Channel |
| Package / Case | 10-VFQFN |
| Ratio - Input:Output [custom] | 1:1 |
| Rds On (Typ) | 6 mOhm |
| Supplier Device Package | 10-VQFN-HR (2x2) |
| Switch Type | General Purpose |
| Voltage - Load [Max] | 16 V |
| Voltage - Load [Min] | 2.7 V |
| Voltage - Supply (Vcc/Vdd) | Not Required |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
TPS22811 Series
2.7-V to 16-V, 10-A, 6-mΩ load switch with fast overvoltage protection and current monitoring
| Part | Operating Temperature [Max] | Operating Temperature [Min] | Output Type | Voltage - Supply (Vcc/Vdd) | Switch Type | Input Type | Mounting Type | Features | Voltage - Load [Max] | Voltage - Load [Min] | Interface | Supplier Device Package | Output Configuration | Number of Outputs | Rds On (Typ) | Ratio - Input:Output [custom] | Package / Case | Fault Protection | Current - Output (Max) [Max] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS22811LRPWRThe TPS22811x is a highly-integrated, power-distribution solution in a small package. The device allows control and monitoring of power supply rails using minimum number of external components.
Output slew rate and inrush current can be adjusted using one external capacitor. Loads are protected from input overvoltage conditions by cutting off the output if input exceeds an adjustable overvoltage threshold. The device integrates a fast-trip response to provide protection against severe faults at the output during steady-state.
The devices provide an accurate analog sense of the output load current as well as a digital power-good indication to help with system monitoring and diagnostics.
The devices are available in a 2-mm × 2-mm, 10-pin HotRod™ QFN package for improved thermal performance and reduced system footprint.
The devices are characterized for operation over a junction temperature range of –40°C to +125°C.
The TPS22811x is a highly-integrated, power-distribution solution in a small package. The device allows control and monitoring of power supply rails using minimum number of external components.
Output slew rate and inrush current can be adjusted using one external capacitor. Loads are protected from input overvoltage conditions by cutting off the output if input exceeds an adjustable overvoltage threshold. The device integrates a fast-trip response to provide protection against severe faults at the output during steady-state.
The devices provide an accurate analog sense of the output load current as well as a digital power-good indication to help with system monitoring and diagnostics.
The devices are available in a 2-mm × 2-mm, 10-pin HotRod™ QFN package for improved thermal performance and reduced system footprint.
The devices are characterized for operation over a junction temperature range of –40°C to +125°C. | 125 ¯C | -40 °C | N-Channel | Not Required | General Purpose | Non-Inverting | Surface Mount | Slew Rate Controlled | 16 V | 2.7 V | On/Off | 10-VQFN-HR (2x2) | High Side | 1 | 6 mOhm | 1:1 | 10-VFQFN | Current Limiting (Fixed), Over Temperature, Over Voltage, Short Circuit, UVLO | 10 A |
Description
General part information
TPS22811 Series
The TPS22811x is a highly-integrated, power-distribution solution in a small package. The device allows control and monitoring of power supply rails using minimum number of external components.
Output slew rate and inrush current can be adjusted using one external capacitor. Loads are protected from input overvoltage conditions by cutting off the output if input exceeds an adjustable overvoltage threshold. The device integrates a fast-trip response to provide protection against severe faults at the output during steady-state.
The devices provide an accurate analog sense of the output load current as well as a digital power-good indication to help with system monitoring and diagnostics.