Zenode.ai Logo
LP3875EMP-3.3 - MP05A

LP3875EMP-3.3

Active
Texas Instruments

IC REG LINEAR 3.3V 1.5A SOT223-5

Deep-Dive with AI

Search across all available documentation for this part.

Documents
LP3875EMP-3.3 - MP05A

LP3875EMP-3.3

Active
Texas Instruments

IC REG LINEAR 3.3V 1.5A SOT223-5

Deep-Dive with AI

Documents

Technical Specifications

Parameters and characteristics commom to parts in this series

SpecificationLP3875EMP-3.3LP3875 Series
Control FeaturesEnableEnable
Current - Output1.5 A1.5 A
Current - Quiescent (Iq)5 mA5 mA
Current - Supply (Max) [Max]15 mA15 mA
Mounting TypeSurface MountSurface Mount, Through Hole
Number of Regulators11
Operating Temperature [Max]125 °C125 °C
Operating Temperature [Min]-40 °C-40 °C
Output ConfigurationPositivePositive
Output Type27.03 °C/W27.03 °C/W
Output Type-Adjustable
Package / CaseTO-261-5, TO-261ABTO-263BA, D2PAK (5 Leads + Tab), TO-263-6, TO-261-5, TO-261AB, TO-220-5 Formed Leads
Protection FeaturesOver Current, Short Circuit, Over TemperatureOver Current, Short Circuit, Over Temperature
PSRR [Max]73 dB73 dB
PSRR [Min]57 dB57 dB
Supplier Device PackageSOT-223-5TO-263 (DDPAK-5), SOT-223-5, TO-220-5
Voltage - Input (Max) [Max]7 V7 V
Voltage - Output (Max)-6.4 V
Voltage - Output (Min/Fixed)3.3 V1.8 - 5 V
Voltage Dropout (Max)0.55 V0.55 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

LP3875 Series

1.5-A, 7-V, LOW-DROPOUT VOLTAGE REGULATOR WITH ENABLE

PartCurrent - Quiescent (Iq)Control FeaturesPackage / CaseOperating Temperature [Max]Operating Temperature [Min]Voltage - Output (Min/Fixed)Current - Supply (Max) [Max]Mounting TypeVoltage - Input (Max) [Max]Number of RegulatorsProtection FeaturesOutput TypeSupplier Device PackageVoltage Dropout (Max)Current - OutputOutput ConfigurationPSRR [Min]PSRR [Max]Voltage - Output (Max) [Max]Output Type
Texas Instruments
LP3875ESX-3.3/NOPB
The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions. Dropout Voltage:Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current. Ground Pin Current:Typically 6 mA at 1.5-A load current. Shutdown Mode:Typically 10-nA quiescent current when theSDpin is pulled low. ERRORFlag:ERRORflag goes low when the output voltage drops 10% below nominal value (LP3872 only). SENSE:Sense pin improves regulation at remote loads (LP3875 only). Precision Output Voltage:Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature). The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions. Dropout Voltage:Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current. Ground Pin Current:Typically 6 mA at 1.5-A load current. Shutdown Mode:Typically 10-nA quiescent current when theSDpin is pulled low. ERRORFlag:ERRORflag goes low when the output voltage drops 10% below nominal value (LP3872 only). SENSE:Sense pin improves regulation at remote loads (LP3875 only). Precision Output Voltage:Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature).
5 mA
Enable
D2PAK (5 Leads + Tab), TO-263-6, TO-263BA
125 °C
-40 °C
3.3 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
TO-263 (DDPAK-5)
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875EMPX-ADJ
Linear Voltage Regulator IC Positive Adjustable 1 Output 1.5A SOT-223-5
5 mA
Enable
TO-261-5, TO-261AB
125 °C
-40 °C
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
SOT-223-5
0.55 V
1.5 A
Positive
57 dB
73 dB
6.4 V
Adjustable
Texas Instruments
LP3875EMP-ADJ
Linear Voltage Regulator IC Positive Adjustable 1 Output 1.5A SOT-223-5
5 mA
Enable
TO-261-5, TO-261AB
125 °C
-40 °C
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
SOT-223-5
0.55 V
1.5 A
Positive
57 dB
73 dB
6.4 V
Adjustable
Texas Instruments
LP3875ET-3.3/NOPB
The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions. Dropout Voltage:Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current. Ground Pin Current:Typically 6 mA at 1.5-A load current. Shutdown Mode:Typically 10-nA quiescent current when theSDpin is pulled low. ERRORFlag:ERRORflag goes low when the output voltage drops 10% below nominal value (LP3872 only). SENSE:Sense pin improves regulation at remote loads (LP3875 only). Precision Output Voltage:Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature). The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions. Dropout Voltage:Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current. Ground Pin Current:Typically 6 mA at 1.5-A load current. Shutdown Mode:Typically 10-nA quiescent current when theSDpin is pulled low. ERRORFlag:ERRORflag goes low when the output voltage drops 10% below nominal value (LP3872 only). SENSE:Sense pin improves regulation at remote loads (LP3875 only). Precision Output Voltage:Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature).
5 mA
Enable
TO-220-5 Formed Leads
125 °C
-40 °C
3.3 V
15 mA
Through Hole
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
TO-220-5
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875ES-ADJ
Linear Voltage Regulator IC Positive Adjustable 1 Output 1.5A TO-263 (DDPAK-5)
5 mA
Enable
D2PAK (5 Leads + Tab), TO-263-6, TO-263BA
125 °C
-40 °C
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
TO-263 (DDPAK-5)
0.55 V
1.5 A
Positive
57 dB
73 dB
6.4 V
Adjustable
Texas Instruments
LP3875EMP-ADJ/NOPB
The LP3875-ADJ fast ultra-low-dropout LDO operates from a 2.5-V to 7-V input supply. This ultra-low-dropout LDO responds very quickly to step changes in load, which makes it suitable for low-voltage microprocessor applications. The LP3875-ADJ is developed on a CMOS process, which allows low quiescent-current operation independent of output load current. This CMOS process also allows the LP3875-ADJ to operate under extremely low dropout conditions. The LP3875-ADJ fast ultra-low-dropout LDO operates from a 2.5-V to 7-V input supply. This ultra-low-dropout LDO responds very quickly to step changes in load, which makes it suitable for low-voltage microprocessor applications. The LP3875-ADJ is developed on a CMOS process, which allows low quiescent-current operation independent of output load current. This CMOS process also allows the LP3875-ADJ to operate under extremely low dropout conditions.
5 mA
Enable
TO-261-5, TO-261AB
125 °C
-40 °C
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
SOT-223-5
0.55 V
1.5 A
Positive
57 dB
73 dB
6.4 V
Adjustable
Texas Instruments
LP3875EMPX-1.8/NOPB
Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A SOT-223-5
5 mA
Enable
TO-261-5, TO-261AB
125 °C
-40 °C
1.8 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
SOT-223-5
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875ESX-3.3
Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-263 (DDPAK-5)
5 mA
Enable
D2PAK (5 Leads + Tab), TO-263-6, TO-263BA
125 °C
-40 °C
3.3 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
TO-263 (DDPAK-5)
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875EMP-1.8/NOPB
The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions. Dropout Voltage:Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current. Ground Pin Current:Typically 6 mA at 1.5-A load current. Shutdown Mode:Typically 10-nA quiescent current when theSDpin is pulled low. ERRORFlag:ERRORflag goes low when the output voltage drops 10% below nominal value (LP3872 only). SENSE:Sense pin improves regulation at remote loads (LP3875 only). Precision Output Voltage:Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature). The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions. Dropout Voltage:Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current. Ground Pin Current:Typically 6 mA at 1.5-A load current. Shutdown Mode:Typically 10-nA quiescent current when theSDpin is pulled low. ERRORFlag:ERRORflag goes low when the output voltage drops 10% below nominal value (LP3872 only). SENSE:Sense pin improves regulation at remote loads (LP3875 only). Precision Output Voltage:Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature).
5 mA
Enable
TO-261-5, TO-261AB
125 °C
-40 °C
1.8 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
SOT-223-5
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875EMP-5.0/NOPB
The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions. Dropout Voltage:Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current. Ground Pin Current:Typically 6 mA at 1.5-A load current. Shutdown Mode:Typically 10-nA quiescent current when theSDpin is pulled low. ERRORFlag:ERRORflag goes low when the output voltage drops 10% below nominal value (LP3872 only). SENSE:Sense pin improves regulation at remote loads (LP3875 only). Precision Output Voltage:Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature). The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions. Dropout Voltage:Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current. Ground Pin Current:Typically 6 mA at 1.5-A load current. Shutdown Mode:Typically 10-nA quiescent current when theSDpin is pulled low. ERRORFlag:ERRORflag goes low when the output voltage drops 10% below nominal value (LP3872 only). SENSE:Sense pin improves regulation at remote loads (LP3875 only). Precision Output Voltage:Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature).
5 mA
Enable
TO-261-5, TO-261AB
125 °C
-40 °C
5 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
SOT-223-5
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875EMPX-5.0/NOPB
Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A SOT-223-5
5 mA
Enable
TO-261-5, TO-261AB
125 °C
-40 °C
5 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
SOT-223-5
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875ET-ADJ/NOPB
Linear Voltage Regulator IC Positive Adjustable 1 Output 1.5A TO-220-5
5 mA
Enable
TO-220-5 Formed Leads
125 °C
-40 °C
15 mA
Through Hole
7 V
1
Over Current, Over Temperature, Short Circuit
TO-220-5
0.55 V
1.5 A
Positive
57 dB
73 dB
6.4 V
Adjustable
Texas Instruments
LP3875ESX-1.8/NOPB
The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions. Dropout Voltage:Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current. Ground Pin Current:Typically 6 mA at 1.5-A load current. Shutdown Mode:Typically 10-nA quiescent current when theSDpin is pulled low. ERRORFlag:ERRORflag goes low when the output voltage drops 10% below nominal value (LP3872 only). SENSE:Sense pin improves regulation at remote loads (LP3875 only). Precision Output Voltage:Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature). The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions. Dropout Voltage:Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current. Ground Pin Current:Typically 6 mA at 1.5-A load current. Shutdown Mode:Typically 10-nA quiescent current when theSDpin is pulled low. ERRORFlag:ERRORflag goes low when the output voltage drops 10% below nominal value (LP3872 only). SENSE:Sense pin improves regulation at remote loads (LP3875 only). Precision Output Voltage:Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature).
5 mA
Enable
D2PAK (5 Leads + Tab), TO-263-6, TO-263BA
125 °C
-40 °C
1.8 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
TO-263 (DDPAK-5)
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875EMP-3.3/NOPB
The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions. Dropout Voltage:Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current. Ground Pin Current:Typically 6 mA at 1.5-A load current. Shutdown Mode:Typically 10-nA quiescent current when theSDpin is pulled low. ERRORFlag:ERRORflag goes low when the output voltage drops 10% below nominal value (LP3872 only). SENSE:Sense pin improves regulation at remote loads (LP3875 only). Precision Output Voltage:Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature). The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions. Dropout Voltage:Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current. Ground Pin Current:Typically 6 mA at 1.5-A load current. Shutdown Mode:Typically 10-nA quiescent current when theSDpin is pulled low. ERRORFlag:ERRORflag goes low when the output voltage drops 10% below nominal value (LP3872 only). SENSE:Sense pin improves regulation at remote loads (LP3875 only). Precision Output Voltage:Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature).
5 mA
Enable
TO-261-5, TO-261AB
125 °C
-40 °C
3.3 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
SOT-223-5
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875EMP-2.5/NOPB
The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions. Dropout Voltage:Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current. Ground Pin Current:Typically 6 mA at 1.5-A load current. Shutdown Mode:Typically 10-nA quiescent current when theSDpin is pulled low. ERRORFlag:ERRORflag goes low when the output voltage drops 10% below nominal value (LP3872 only). SENSE:Sense pin improves regulation at remote loads (LP3875 only). Precision Output Voltage:Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature). The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions. Dropout Voltage:Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current. Ground Pin Current:Typically 6 mA at 1.5-A load current. Shutdown Mode:Typically 10-nA quiescent current when theSDpin is pulled low. ERRORFlag:ERRORflag goes low when the output voltage drops 10% below nominal value (LP3872 only). SENSE:Sense pin improves regulation at remote loads (LP3875 only). Precision Output Voltage:Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature).
5 mA
Enable
TO-261-5, TO-261AB
125 °C
-40 °C
2.5 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
SOT-223-5
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875EMPX-3.3/NOPB
Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A SOT-223-5
5 mA
Enable
TO-261-5, TO-261AB
125 °C
-40 °C
3.3 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
SOT-223-5
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875ET-3.3
Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-220-5
5 mA
Enable
TO-220-5 Formed Leads
125 °C
-40 °C
3.3 V
15 mA
Through Hole
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
TO-220-5
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875ET-2.5/NOPB
Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-220-5
5 mA
Enable
TO-220-5 Formed Leads
125 °C
-40 °C
2.5 V
15 mA
Through Hole
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
TO-220-5
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875ES-3.3
Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-263 (DDPAK-5)
5 mA
Enable
D2PAK (5 Leads + Tab), TO-263-6, TO-263BA
125 °C
-40 °C
3.3 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
TO-263 (DDPAK-5)
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875EMPX-2.5/NOPB
Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A SOT-223-5
5 mA
Enable
TO-261-5, TO-261AB
125 °C
-40 °C
2.5 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
SOT-223-5
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875EMP-5.0
Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A SOT-223-5
5 mA
Enable
TO-261-5, TO-261AB
125 °C
-40 °C
5 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
SOT-223-5
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875ESX-2.5
Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-263 (DDPAK-5)
5 mA
Enable
D2PAK (5 Leads + Tab), TO-263-6, TO-263BA
125 °C
-40 °C
2.5 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
TO-263 (DDPAK-5)
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875ES-2.5/NOPB
The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions. Dropout Voltage:Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current. Ground Pin Current:Typically 6 mA at 1.5-A load current. Shutdown Mode:Typically 10-nA quiescent current when theSDpin is pulled low. ERRORFlag:ERRORflag goes low when the output voltage drops 10% below nominal value (LP3872 only). SENSE:Sense pin improves regulation at remote loads (LP3875 only). Precision Output Voltage:Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature). The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions. Dropout Voltage:Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current. Ground Pin Current:Typically 6 mA at 1.5-A load current. Shutdown Mode:Typically 10-nA quiescent current when theSDpin is pulled low. ERRORFlag:ERRORflag goes low when the output voltage drops 10% below nominal value (LP3872 only). SENSE:Sense pin improves regulation at remote loads (LP3875 only). Precision Output Voltage:Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature).
5 mA
Enable
D2PAK (5 Leads + Tab), TO-263-6, TO-263BA
125 °C
-40 °C
2.5 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
TO-263 (DDPAK-5)
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875EMP-3.3
Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A SOT-223-5
5 mA
Enable
TO-261-5, TO-261AB
125 °C
-40 °C
3.3 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
SOT-223-5
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875ESX-ADJ
Linear Voltage Regulator IC Positive Adjustable 1 Output 1.5A TO-263 (DDPAK-5)
5 mA
Enable
D2PAK (5 Leads + Tab), TO-263-6, TO-263BA
125 °C
-40 °C
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
TO-263 (DDPAK-5)
0.55 V
1.5 A
Positive
57 dB
73 dB
6.4 V
Adjustable
Texas Instruments
LP3875EMPX-ADJ/NOPB
The LP3875-ADJ fast ultra-low-dropout LDO operates from a 2.5-V to 7-V input supply. This ultra-low-dropout LDO responds very quickly to step changes in load, which makes it suitable for low-voltage microprocessor applications. The LP3875-ADJ is developed on a CMOS process, which allows low quiescent-current operation independent of output load current. This CMOS process also allows the LP3875-ADJ to operate under extremely low dropout conditions. The LP3875-ADJ fast ultra-low-dropout LDO operates from a 2.5-V to 7-V input supply. This ultra-low-dropout LDO responds very quickly to step changes in load, which makes it suitable for low-voltage microprocessor applications. The LP3875-ADJ is developed on a CMOS process, which allows low quiescent-current operation independent of output load current. This CMOS process also allows the LP3875-ADJ to operate under extremely low dropout conditions.
5 mA
Enable
TO-261-5, TO-261AB
125 °C
-40 °C
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
SOT-223-5
0.55 V
1.5 A
Positive
57 dB
73 dB
6.4 V
Adjustable
Texas Instruments
LP3875ES-ADJ/NOPB
The LP3875-ADJ fast ultra-low-dropout LDO operates from a 2.5-V to 7-V input supply. This ultra-low-dropout LDO responds very quickly to step changes in load, which makes it suitable for low-voltage microprocessor applications. The LP3875-ADJ is developed on a CMOS process, which allows low quiescent-current operation independent of output load current. This CMOS process also allows the LP3875-ADJ to operate under extremely low dropout conditions. The LP3875-ADJ fast ultra-low-dropout LDO operates from a 2.5-V to 7-V input supply. This ultra-low-dropout LDO responds very quickly to step changes in load, which makes it suitable for low-voltage microprocessor applications. The LP3875-ADJ is developed on a CMOS process, which allows low quiescent-current operation independent of output load current. This CMOS process also allows the LP3875-ADJ to operate under extremely low dropout conditions.
5 mA
Enable
D2PAK (5 Leads + Tab), TO-263-6, TO-263BA
125 °C
-40 °C
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
TO-263 (DDPAK-5)
0.55 V
1.5 A
Positive
57 dB
73 dB
6.4 V
Adjustable
Texas Instruments
LP3875ESX-ADJ/NOPB
The LP3875-ADJ fast ultra-low-dropout LDO operates from a 2.5-V to 7-V input supply. This ultra-low-dropout LDO responds very quickly to step changes in load, which makes it suitable for low-voltage microprocessor applications. The LP3875-ADJ is developed on a CMOS process, which allows low quiescent-current operation independent of output load current. This CMOS process also allows the LP3875-ADJ to operate under extremely low dropout conditions. The LP3875-ADJ fast ultra-low-dropout LDO operates from a 2.5-V to 7-V input supply. This ultra-low-dropout LDO responds very quickly to step changes in load, which makes it suitable for low-voltage microprocessor applications. The LP3875-ADJ is developed on a CMOS process, which allows low quiescent-current operation independent of output load current. This CMOS process also allows the LP3875-ADJ to operate under extremely low dropout conditions.
5 mA
Enable
D2PAK (5 Leads + Tab), TO-263-6, TO-263BA
125 °C
-40 °C
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
TO-263 (DDPAK-5)
0.55 V
1.5 A
Positive
57 dB
73 dB
6.4 V
Adjustable
Texas Instruments
LP3875ES-1.8/NOPB
The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions. Dropout Voltage:Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current. Ground Pin Current:Typically 6 mA at 1.5-A load current. Shutdown Mode:Typically 10-nA quiescent current when theSDpin is pulled low. ERRORFlag:ERRORflag goes low when the output voltage drops 10% below nominal value (LP3872 only). SENSE:Sense pin improves regulation at remote loads (LP3875 only). Precision Output Voltage:Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature). The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions. Dropout Voltage:Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current. Ground Pin Current:Typically 6 mA at 1.5-A load current. Shutdown Mode:Typically 10-nA quiescent current when theSDpin is pulled low. ERRORFlag:ERRORflag goes low when the output voltage drops 10% below nominal value (LP3872 only). SENSE:Sense pin improves regulation at remote loads (LP3875 only). Precision Output Voltage:Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature).
5 mA
Enable
D2PAK (5 Leads + Tab), TO-263-6, TO-263BA
125 °C
-40 °C
1.8 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
TO-263 (DDPAK-5)
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875ES-3.3/NOPB
The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions. Dropout Voltage:Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current. Ground Pin Current:Typically 6 mA at 1.5-A load current. Shutdown Mode:Typically 10-nA quiescent current when theSDpin is pulled low. ERRORFlag:ERRORflag goes low when the output voltage drops 10% below nominal value (LP3872 only). SENSE:Sense pin improves regulation at remote loads (LP3875 only). Precision Output Voltage:Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature). The LP387x series of fast ultra low-dropout linear regulators operate from a 2.5-V to 7-V input supply. Wide range of preset output voltage options are available. These ultra low-dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low-voltage microprocessor applications. The LP3872 and LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872 and LP3875 to operate under extremely low dropout conditions. Dropout Voltage:Ultra low-dropout voltage; typically 38 mV at 150-mA load current and 380 mV at 1.5-A load current. Ground Pin Current:Typically 6 mA at 1.5-A load current. Shutdown Mode:Typically 10-nA quiescent current when theSDpin is pulled low. ERRORFlag:ERRORflag goes low when the output voltage drops 10% below nominal value (LP3872 only). SENSE:Sense pin improves regulation at remote loads (LP3875 only). Precision Output Voltage:Multiple output voltage options are available ranging from 1.8 V to 5 V with a specified accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature).
5 mA
Enable
D2PAK (5 Leads + Tab), TO-263-6, TO-263BA
125 °C
-40 °C
3.3 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
TO-263 (DDPAK-5)
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875ES-5.0/NOPB
Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-263 (DDPAK-5)
5 mA
Enable
D2PAK (5 Leads + Tab), TO-263-6, TO-263BA
125 °C
-40 °C
5 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
TO-263 (DDPAK-5)
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875ES-2.5
Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-263 (DDPAK-5)
5 mA
Enable
D2PAK (5 Leads + Tab), TO-263-6, TO-263BA
125 °C
-40 °C
2.5 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
TO-263 (DDPAK-5)
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875ES-1.8
Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A TO-263 (DDPAK-5)
5 mA
Enable
D2PAK (5 Leads + Tab), TO-263-6, TO-263BA
125 °C
-40 °C
1.8 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
TO-263 (DDPAK-5)
0.55 V
1.5 A
Positive
57 dB
73 dB
Texas Instruments
LP3875EMP-2.5
Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A SOT-223-5
5 mA
Enable
TO-261-5, TO-261AB
125 °C
-40 °C
2.5 V
15 mA
Surface Mount
7 V
1
Over Current, Over Temperature, Short Circuit
27.03 °C/W
SOT-223-5
0.55 V
1.5 A
Positive
57 dB
73 dB

Description

General part information

LP3875 Series

Linear Voltage Regulator IC Positive Fixed 1 Output 1.5A SOT-223-5

Documents

Technical documentation and resources