Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | TRS208CDWG4 | TRS208 Series |
|---|---|---|
| Data Rate | 120 Kbps | 120 Kbps |
| Duplex | Full | Full |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Drivers/Receivers [custom] | 4 | 4 |
| Number of Drivers/Receivers [custom] | 4 | 4 |
| Operating Temperature [Max] | 70 ░C | 70 - 85 °C |
| Operating Temperature [Min] | 0 °C | -40 - 0 °C |
| Package / Case | 24-SOIC | 24-SSOP, 24-SOIC |
| Package / Case | - | 0.209 in |
| Package / Case | - | 5.3 mm |
| Package / Case [x] | 0.295 in | 0.295 in |
| Package / Case [y] | 7.5 mm | 7.5 mm |
| Protocol | RS232 | RS232 |
| Receiver Hysteresis | 500 mV | 500 mV |
| Supplier Device Package | 24-SOIC | 24-SSOP, 24-SOIC |
| Type | Transceiver | Transceiver |
| Voltage - Supply [Max] | 5.5 V | 5.5 V |
| Voltage - Supply [Min] | 4.5 V | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
TRS208 Series
5-V QUAD CHANNEL 120KBPS RS-232 LINE DRIVER/RECEIVER WITH +/-9V OUTPUT & +/-15-KV ESD PROTECTION 24-SSOP -40 TO 85
| Part | Voltage - Supply [Max] | Voltage - Supply [Min] | Number of Drivers/Receivers [custom] | Number of Drivers/Receivers [custom] | Data Rate | Receiver Hysteresis | Package / Case | Package / Case | Package / Case | Operating Temperature [Min] | Operating Temperature [Max] | Duplex | Supplier Device Package | Type | Protocol | Mounting Type | Package / Case [y] | Package / Case [x] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TRS208IDBThe TRS208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The devices operate at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.
The TRS208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The devices operate at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. | 5.5 V | 4.5 V | 4 | 4 | 120 Kbps | 500 mV | 0.209 in | 5.3 mm | 24-SSOP | -40 °C | 85 °C | Full | 24-SSOP | Transceiver | RS232 | Surface Mount | ||
5.5 V | 4.5 V | 4 | 4 | 120 Kbps | 500 mV | 0.209 in | 5.3 mm | 24-SSOP | 0 °C | 70 ░C | Full | 24-SSOP | Transceiver | RS232 | Surface Mount | |||
5.5 V | 4.5 V | 4 | 4 | 120 Kbps | 500 mV | 24-SOIC | -40 °C | 85 °C | Full | 24-SOIC | Transceiver | RS232 | Surface Mount | 7.5 mm | 0.295 in | |||
Texas Instruments TRS208IDBRThe TRS208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The devices operate at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.
The TRS208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The devices operate at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. | 5.5 V | 4.5 V | 4 | 4 | 120 Kbps | 500 mV | 0.209 in | 5.3 mm | 24-SSOP | -40 °C | 85 °C | Full | 24-SSOP | Transceiver | RS232 | Surface Mount | ||
5.5 V | 4.5 V | 4 | 4 | 120 Kbps | 500 mV | 24-SOIC | -40 °C | 85 °C | Full | 24-SOIC | Transceiver | RS232 | Surface Mount | 7.5 mm | 0.295 in | |||
Texas Instruments TRS208IDWRThe TRS208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The devices operate at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.
The TRS208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The devices operate at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. | 5.5 V | 4.5 V | 4 | 4 | 120 Kbps | 500 mV | 24-SOIC | -40 °C | 85 °C | Full | 24-SOIC | Transceiver | RS232 | Surface Mount | 7.5 mm | 0.295 in | ||
5.5 V | 4.5 V | 4 | 4 | 120 Kbps | 500 mV | 24-SOIC | 0 °C | 70 ░C | Full | 24-SOIC | Transceiver | RS232 | Surface Mount | 7.5 mm | 0.295 in | |||
Texas Instruments TRS208CDBRThe TRS208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The devices operate at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.
The TRS208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The devices operate at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. | 5.5 V | 4.5 V | 4 | 4 | 120 Kbps | 500 mV | 0.209 in | 5.3 mm | 24-SSOP | 0 °C | 70 ░C | Full | 24-SSOP | Transceiver | RS232 | Surface Mount | ||
Texas Instruments TRS208CDWRThe TRS208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The devices operate at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.
The TRS208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The devices operate at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. | 5.5 V | 4.5 V | 4 | 4 | 120 Kbps | 500 mV | 24-SOIC | 0 °C | 70 ░C | Full | 24-SOIC | Transceiver | RS232 | Surface Mount | 7.5 mm | 0.295 in | ||
5.5 V | 4.5 V | 4 | 4 | 120 Kbps | 500 mV | 24-SOIC | 0 °C | 70 ░C | Full | 24-SOIC | Transceiver | RS232 | Surface Mount | 7.5 mm | 0.295 in |
Description
General part information
TRS208 Series
4/4 Transceiver Full RS232 24-SOIC