Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | LP38856S-0.8 | LP38856 Series |
|---|---|---|
| Board Type | - | Fully Populated |
| Channels per IC | - | 1 |
| Control Features | Enable | Enable |
| Current - Output | 3 A | 3 A |
| Current - Quiescent (Iq) | 300 µA | 300 µA |
| Current - Supply (Max) [Max] | 15 mA | 15 mA |
| Mounting Type | Surface Mount | Through Hole, Surface Mount |
| Number of Regulators | 1 | 1 |
| Operating Temperature [Max] | 125 °C | 125 °C |
| Operating Temperature [Min] | -40 °C | -40 °C |
| Output Configuration | Positive | Positive |
| Output Type | 27.03 °C/W | 27.03 °C/W |
| Package / Case | TO-263BA, D2PAK (5 Leads + Tab), TO-263-6 | TO-220-5 Formed Leads, TO-263BA, D2PAK (5 Leads + Tab), TO-263-6 |
| Protection Features | Under Voltage Lockout (UVLO), Over Temperature, Over Current, Short Circuit | Under Voltage Lockout (UVLO), Over Temperature, Over Current, Short Circuit |
| PSRR [Max] | 80 dB | 80 dB |
| PSRR [Min] | 65 dB | 65 dB |
| Regulator Type | - | Positive Fixed |
| Supplied Contents | - | Board(s) |
| Supplier Device Package | TO-263 (DDPAK-5) | TO-220-5, TO-263 (DDPAK-5) |
| Utilized IC / Part | - | LP38856 |
| Voltage - Input | - | 3 V |
| Voltage - Input | - | 5.5 V |
| Voltage - Input (Max) [Max] | 5.5 V | 5.5 V |
| Voltage - Output | - | 1.2 V |
| Voltage - Output (Min/Fixed) | 0.8 V | 0.8 - 1.2 V |
| Voltage Dropout (Max) | 0.45 V | 0.45 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
LP38856 Series
3-A, LOW-VIN (1.15-V), HIGH-ACCURACY, ULTRA-LOW-DROPOUT VOLTAGE REGULATOR WITH ENABLE
| Part | Protection Features | Current - Quiescent (Iq) | Current - Supply (Max) [Max] | Operating Temperature [Max] | Operating Temperature [Min] | Package / Case | PSRR [Max] | PSRR [Min] | Mounting Type | Control Features | Supplier Device Package | Voltage Dropout (Max) | Output Configuration | Number of Regulators | Current - Output | Voltage - Input (Max) [Max] | Voltage - Output (Min/Fixed) | Output Type | Voltage - Output | Board Type | Supplied Contents | Voltage - Input [Min] | Voltage - Input [Max] | Regulator Type | Channels per IC | Utilized IC / Part |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments LP38856T-1.2/NOPBThe LP38856 is a high-current, fast-response regulator which can maintain output voltage regulation with an extremely low input-to-output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: VBIASprovides power for the internal bias and control circuits, as well as drive for the gate of the N-MOS power transistor, while VINsupplies power to the load. The use of an external bias rail allows the part to operate from ultra-low VINvoltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of this device makes it suitable for use in powering DSP, microcontroller core voltages, and switch mode power supply post regulators. The LP38856 is available in 5-pin TO-220 and DDPAK/TO-263 packages.
The LP38856 is a high-current, fast-response regulator which can maintain output voltage regulation with an extremely low input-to-output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: VBIASprovides power for the internal bias and control circuits, as well as drive for the gate of the N-MOS power transistor, while VINsupplies power to the load. The use of an external bias rail allows the part to operate from ultra-low VINvoltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of this device makes it suitable for use in powering DSP, microcontroller core voltages, and switch mode power supply post regulators. The LP38856 is available in 5-pin TO-220 and DDPAK/TO-263 packages. | Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO) | 300 µA | 15 mA | 125 °C | -40 °C | TO-220-5 Formed Leads | 80 dB | 65 dB | Through Hole | Enable | TO-220-5 | 0.45 V | Positive | 1 | 3 A | 5.5 V | 1.2 V | 27.03 °C/W | ||||||||
Texas Instruments LP38856SX-1.2/NOPBThe LP38856 is a high-current, fast-response regulator which can maintain output voltage regulation with an extremely low input-to-output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: VBIASprovides power for the internal bias and control circuits, as well as drive for the gate of the N-MOS power transistor, while VINsupplies power to the load. The use of an external bias rail allows the part to operate from ultra-low VINvoltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of this device makes it suitable for use in powering DSP, microcontroller core voltages, and switch mode power supply post regulators. The LP38856 is available in 5-pin TO-220 and DDPAK/TO-263 packages.
The LP38856 is a high-current, fast-response regulator which can maintain output voltage regulation with an extremely low input-to-output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: VBIASprovides power for the internal bias and control circuits, as well as drive for the gate of the N-MOS power transistor, while VINsupplies power to the load. The use of an external bias rail allows the part to operate from ultra-low VINvoltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of this device makes it suitable for use in powering DSP, microcontroller core voltages, and switch mode power supply post regulators. The LP38856 is available in 5-pin TO-220 and DDPAK/TO-263 packages. | Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO) | 300 µA | 15 mA | 125 °C | -40 °C | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 80 dB | 65 dB | Surface Mount | Enable | TO-263 (DDPAK-5) | 0.45 V | Positive | 1 | 3 A | 5.5 V | 1.2 V | 27.03 °C/W | ||||||||
Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO) | 300 µA | 15 mA | 125 °C | -40 °C | TO-220-5 Formed Leads | 80 dB | 65 dB | Through Hole | Enable | TO-220-5 | 0.45 V | Positive | 1 | 3 A | 5.5 V | 1.2 V | 27.03 °C/W | |||||||||
Texas Instruments LP38856-1.2EVALLP38856 1 - Single Channels per IC Positive Fixed Linear Voltage Regulator Evaluation Board | 3 A | 1.2 V | Fully Populated | Board(s) | 3 V | 5.5 V | Positive Fixed | 1 | LP38856 | |||||||||||||||||
Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO) | 300 µA | 15 mA | 125 °C | -40 °C | TO-220-5 Formed Leads | 80 dB | 65 dB | Through Hole | Enable | TO-220-5 | 0.45 V | Positive | 1 | 3 A | 5.5 V | 0.8 V | 27.03 °C/W | |||||||||
Texas Instruments LP38856S-0.8Linear Voltage Regulator IC Positive Fixed 1 Output 3A TO-263 (DDPAK-5) | Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO) | 300 µA | 15 mA | 125 °C | -40 °C | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 80 dB | 65 dB | Surface Mount | Enable | TO-263 (DDPAK-5) | 0.45 V | Positive | 1 | 3 A | 5.5 V | 0.8 V | 27.03 °C/W | ||||||||
Texas Instruments LP38856S-1.2/NOPBThe LP38856 is a high-current, fast-response regulator which can maintain output voltage regulation with an extremely low input-to-output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: VBIASprovides power for the internal bias and control circuits, as well as drive for the gate of the N-MOS power transistor, while VINsupplies power to the load. The use of an external bias rail allows the part to operate from ultra-low VINvoltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of this device makes it suitable for use in powering DSP, microcontroller core voltages, and switch mode power supply post regulators. The LP38856 is available in 5-pin TO-220 and DDPAK/TO-263 packages.
The LP38856 is a high-current, fast-response regulator which can maintain output voltage regulation with an extremely low input-to-output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: VBIASprovides power for the internal bias and control circuits, as well as drive for the gate of the N-MOS power transistor, while VINsupplies power to the load. The use of an external bias rail allows the part to operate from ultra-low VINvoltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of this device makes it suitable for use in powering DSP, microcontroller core voltages, and switch mode power supply post regulators. The LP38856 is available in 5-pin TO-220 and DDPAK/TO-263 packages. | Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO) | 300 µA | 15 mA | 125 °C | -40 °C | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 80 dB | 65 dB | Surface Mount | Enable | TO-263 (DDPAK-5) | 0.45 V | Positive | 1 | 3 A | 5.5 V | 1.2 V | 27.03 °C/W | ||||||||
Texas Instruments LP38856S-0.8/NOPBLinear Voltage Regulator IC Positive Fixed 1 Output 3A TO-263 (DDPAK-5) | Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO) | 300 µA | 15 mA | 125 °C | -40 °C | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 80 dB | 65 dB | Surface Mount | Enable | TO-263 (DDPAK-5) | 0.45 V | Positive | 1 | 3 A | 5.5 V | 0.8 V | 27.03 °C/W | ||||||||
Texas Instruments LP38856S-1.2Linear Voltage Regulator IC Positive Fixed 1 Output 3A TO-263 (DDPAK-5) | Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO) | 300 µA | 15 mA | 125 °C | -40 °C | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 80 dB | 65 dB | Surface Mount | Enable | TO-263 (DDPAK-5) | 0.45 V | Positive | 1 | 3 A | 5.5 V | 1.2 V | 27.03 °C/W |
Description
General part information
LP38856 Series
Linear Voltage Regulator IC Positive Fixed 1 Output 3A TO-263 (DDPAK-5)