Texas Instruments
Texas Instruments Incorporated (TI) is a global semiconductor design and manufacturing company that develops analog ICs and embedded processors. By employing the worlds brightest minds, TI creates innovations that shape the future of technology. TI is helping more than 100,000 customers transform the future, today.
Series List(7161)
| Part | Category | # Parts | Status | Description |
|---|---|---|---|---|
Texas InstrumentsLT10543.5 V to 15 VIN, 100-mA output current switched-capacitor voltage converters with regulator | Voltage Regulators - DC DC Switching Regulators | 13 | 1 | The LT1054 device is a bipolar, switched-capacitor voltage converter with regulator. It provides higher output current and significantly lower voltage losses than previously available converters. An adaptive-switch drive scheme optimizes efficiency over a wide range of output currents. Total voltage drop at 100-mA output current typically is 1.1 V. This... Read More |
| Voltage Regulators - DC DC Switching Regulators | 2 | 1 | The LTC1044A is a monolithic CMOS switched-capacitor voltage converter. It plugs in for ICL7660/LTC1044 in applications where higher input voltage (up to 12V) is needed. The LTC1044A provides several conversion functions without using inductors. The input voltage can be inverted (VOUT= –VIN), doubled (VOUT= 2VIN), divided (VOUT= VIN/2) or multiplied... Read More | |
| Voltage Regulators - DC DC Switching Regulators | 4 | 1 | The LV2862 is a PWM DC/DC buck (step-down) regulator. With a wide input range from 4 V to 60 V, the device is designed for a wide range of applications, from industrial to automotive, for power conditioning from unregulated source. An ultra-low 1-µA shutdown current can further prolong battery life.... Read More | |
Texas InstrumentsM0L1304Automotive 32-Mhz Arm® Cortex®-M0+ with 16-KB flash, 2-KB RAM, 12-bit ADC,OPA, LIN | Microcontrollers | 6 | 1 | MSPM0L130x microcontrollers (MCUs) are part of the MSP highly-integrated, ultra-low-power32-bit MSPM0 MCU familybased on the enhanced Arm Cortex-M0+ core platform operating at up to 32-MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 125°C, and operate with supply voltages ranging from 1.62... Read More |
Texas InstrumentsM0L1305Automotive 32-Mhz Arm® Cortex®-M0+ with 32-KB flash, 4-KB RAM, 12-bit ADC, OPA, LIN | Microcontrollers | 5 | 1 | MSPM0L130x microcontrollers (MCUs) are part of the MSP highly-integrated, ultra-low-power32-bit MSPM0 MCU familybased on the enhanced Arm Cortex-M0+ core platform operating at up to 32-MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 125°C, and operate with supply voltages ranging from 1.62... Read More |
Texas InstrumentsM0L1306Automotive 32-Mhz Arm® Cortex®-M0+ with 64-KB flash, 4-KB RAM, 12-bit ADC, OPA,LIN | Microcontrollers | 5 | 1 | MSPM0L130x microcontrollers (MCUs) are part of the MSP highly-integrated, ultra-low-power32-bit MSPM0 MCU familybased on the enhanced Arm Cortex-M0+ core platform operating at up to 32-MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 125°C, and operate with supply voltages ranging from 1.62... Read More |
Texas InstrumentsMAX2025-V dual channel 120kbps RS-232 line driver/receiver with +/-9V output & +/-15-kV ESD protection | Interface | 16 | 1 | The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The... Read More |
| Interface | 16 | 1 | MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation.The drivers maintain the ±5V EIA/TIA-232E output signal levels at data rates in excess of 120kbps when loaded in accordance with the EIA/TIA-232E specification.The MAX211 and MAX213 are available... Read More | |
Texas InstrumentsMAX2075-V multichannel 120kbps RS-232 line driver/receiver with +/-9V output & +/-15-kV ESD protection | Interface | 8 | 1 | The MAX207 consists of five line drivers, three line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge... Read More |
Texas InstrumentsMAX2085-V quad channel 120kbps RS-232 line driver/receiver with +/-9V output & +/-15-kV ESD protection | Interface | 12 | 1 | The MAX208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15-kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector.... Read More |
| Interface | 12 | 1 | MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation.The drivers maintain the ±5V EIA/TIA-232E output signal levels at data rates in excess of 120kbps when loaded in accordance with the EIA/TIA-232E specification.The MAX211 and MAX213 are available... Read More | |
| Interface | 9 | 1 | MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation.The drivers maintain the ±5V EIA/TIA-232E output signal levels at data rates in excess of 120kbps when loaded in accordance with the EIA/TIA-232E specification.The MAX211 and MAX213 are available... Read More | |
Texas InstrumentsMAX2115-V multichannel 120kbps RS-232 line driver/receiver with +/-9V output & +/-15-kV ESD protection | Interface | 9 | 1 | The MAX211 device consists of four line drivers, five line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The... Read More |
Texas InstrumentsMAX2135-V multichannel 120kbps RS-232 line driver/receiver with +/-9V output & +/-15-kV ESD protection | Interface | 9 | 8 | The MAX213 device consists of four line drivers, five line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The... Read More |
| Interface | 9 | 8 | MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation.The drivers maintain the ±5V EIA/TIA-232E output signal levels at data rates in excess of 120kbps when loaded in accordance with the EIA/TIA-232E specification.The MAX211 and MAX213 are available... Read More | |
Texas InstrumentsMAX232+5V-Powered, Multichannel RS-232 Drivers/Receivers
+5V-Powered, Multichannel RS-232 Drivers/Receivers | Interface | 45 | 1 | The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available..The MAX225, MAX233, MAX235, and MAX245/MAX246/MAX247 use no external components and are recommended for applications where printed circuit board space is critical.The MAX220–MAX249 are offered in 26 different packages... Read More |
| Interface | 31 | 1 | The MAX3221/MAX3223/MAX3243 achieve 1µA supply current with Maxim’s revolutionary AutoShutdown™feature. When the MAX3221/MAX3223/MAX3243 do not sense a valid signal level on their receiver inputs, the on-board power supply and drivers shut down. This occurs if the RS-232 cable is disconnected or if the transmitters of the connected peripheral are turned... Read More | |
Texas InstrumentsMAX32223- to 5.5-V dual channel 250kbps RS-232 line driver/receiver with +/-15-kV ESD protection | Interface | 30 | 1 | The MAX3222 consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge... Read More |
| Interface | 30 | 1 | The MAX3222/MAX3232/MAX3237/MAX3241 transceivers have a proprietary low-dropout transmitter output stage enabling true RS-232 performance from a 3.0V to 5.5V supply with a dual charge pump. The devices require only four small 0.1µF external charge-pump capacitors. The MAX3222, MAX3232, and MAX3241 are guaranteed to run at data rates of 120kbps while... Read More | |
Texas InstrumentsMAX32233- to 5.5-V dual channel 250kbps RS-232 line driver/receiver with +/-15-kV ESD protection | Interface | 24 | 1 | The MAX3223 consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge... Read More |