MAX213 Series
5-V multichannel 120kbps RS-232 line driver/receiver with +/-9V output & +/-15-kV ESD protection
Manufacturer: Texas Instruments
Catalog(4 parts)
| Part | Receiver Hysteresis▲▼ | Mounting Type | Protocol | Voltage - Supply▲▼ | Voltage - Supply▲▼ | Type | Data Rate▲▼ | Number of Drivers/Receivers▲▼ | Package / Case▲▼ | Package / Case | Package / Case▲▼ | Operating Temperature▲▼ | Operating Temperature▲▼ | Duplex | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0.5 V | Surface Mount | RS232 | 5.5 V | 4.5 V | Transceiver | 122880 bit/s | 4 ul, 5 ul | 0.007493000011891127 m | 28-SOIC | 0.007499999832361937 m | -40 °C | 85 °C | Full | 28-SOIC | |
0.5 V | Surface Mount | RS232 | 5.5 V | 4.5 V | Transceiver | 122880 bit/s | 4 ul, 5 ul | 0.007493000011891127 m | 28-SOIC | 0.007499999832361937 m | 0 °C | 70 °C | Full | 28-SOIC | |
0.5 V | Surface Mount | RS232 | 5.5 V | 4.5 V | Transceiver | 122880 bit/s | 4 ul, 5 ul | 0.007493000011891127 m | 28-SOIC | 0.007499999832361937 m | -40 °C | 85 °C | Full | 28-SOIC | |
0.5 V | Surface Mount | RS232 | 5.5 V | 4.5 V | Transceiver | 122880 bit/s | 4 ul, 5 ul | 0.007493000011891127 m | 28-SOIC | 0.007499999832361937 m | 0 °C | 70 °C | Full | 28-SOIC |
Key Features
• ESD Protection for RS-232 Bus Pins±15-kV Human-Body Model (HBM)Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 StandardsOperates at 5-V VCCSupplyFour Drivers and Five ReceiversOperates up to 120 kbit/sLow Supply Current in Shutdown Mode . . . 15 µA TypExternal Capacitors . . . 4 × 0.1 FDesigned to Be Interchangeable With Maxim MAX213Latch-Up Performance Exceeds 100 mA Per JESD 78, Class IIAPPLICATIONSBattery-Powered SystemsPDAsNotebooksLaptopsPalmtop PCsHand-Held EquipmentESD Protection for RS-232 Bus Pins±15-kV Human-Body Model (HBM)Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 StandardsOperates at 5-V VCCSupplyFour Drivers and Five ReceiversOperates up to 120 kbit/sLow Supply Current in Shutdown Mode . . . 15 µA TypExternal Capacitors . . . 4 × 0.1 FDesigned to Be Interchangeable With Maxim MAX213Latch-Up Performance Exceeds 100 mA Per JESD 78, Class IIAPPLICATIONSBattery-Powered SystemsPDAsNotebooksLaptopsPalmtop PCsHand-Held Equipment
Description
AI
The MAX213 device consists of four line drivers, five line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.
The MAX213 has an active-low shutdown (SHDN) and an active-high enable control (EN). In shutdown mode, the charge pumps are turned off, V+ is pulled down to VCC, V– is pulled to GND, and the transmitter outputs are disabled. This reduces supply current typically to 1 µA. Two receivers of the MAX213 are active during shutdown.
The MAX213 device consists of four line drivers, five line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.
The MAX213 has an active-low shutdown (SHDN) and an active-high enable control (EN). In shutdown mode, the charge pumps are turned off, V+ is pulled down to VCC, V– is pulled to GND, and the transmitter outputs are disabled. This reduces supply current typically to 1 µA. Two receivers of the MAX213 are active during shutdown.