TPS92602-Q1 Series
Automotive 2 channel high side current sense switching mode LED driver
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
Automotive 2 channel high side current sense switching mode LED driver
| Part | Topology | Current - Output / Channel | Number of Outputs [custom] | Operating Temperature [Min] | Operating Temperature [Max] | Applications | Dimming | Supplier Device Package | Frequency [Max] | Frequency [Min] | Mounting Type | Voltage - Supply (Min) [Min] | Voltage - Supply (Max) [Max] | Grade | Type | Internal Switch(s) | Qualification | Package / Case | Voltage - Output [Min] | Voltage - Output [Max] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS92602BQPWPRQ1 | Flyback, SEPIC, Step-Up (Boost) | 1.5 A | 2 | -40 °C | 125 °C | Lighting | Analog, PWM | 28-HTSSOP | 600 kHz | 100 kHz | Surface Mount | 4 V | 40 V | Automotive | DC DC Controller | AEC-Q100 | 28-PowerTSSOP | 4 V | 75 V | |
Texas Instruments TPS92602QPWPRQ1 | Flyback, SEPIC, Step-Up (Boost) | 2 | -40 °C | 125 °C | Analog, PWM | 28-HTSSOP | Surface Mount | 4 V | 40 V | Automotive | DC DC Controller | AEC-Q100 | 28-PowerTSSOP | 4 V | 75 V |
Key Features
• Qualified for Automotive ApplicationsAEC-Q100 Qualified With the Following Results:Device Temperature Grade 1: –40°C to 125°C Ambient Operating TemperatureDevice HBM ESD Classification Level 2Device CDM ESD Classification Level C4BInput Voltage: 4 V–40 V (45 V Abs. Max.)Output Voltage: 4 V–75 V (80 V Abs. Max.)Fixed-Frequency Current-Mode Controller With Integrated Slope CompensationTwo Regulation Loops, Constant-Current Output and Constant-Voltage Output of Each ChannelHigh-Side Current Sense:150-mV or 300-mV Sense Voltage (EEPROM Option)±6-mV Offset (Achieving Approx. 4% or 2% LED Current Accuracy)Output Voltage Sense, Internal Voltage Reference: 2.2 V ±5%Integrated Low-Side NMOS-FET Driver: Peak Gate-Drive Current Typ. 0.7 AFrequency SynchronizationBoth PWM Dimming and Analog DimmingDiagnostic:High-Side Current (LED Current) Available as Analog OutputOpen-LED and Short-to-GND DetectionShorted Output ProtectionInternal Under- and Overvoltage LockoutQualified for Automotive ApplicationsAEC-Q100 Qualified With the Following Results:Device Temperature Grade 1: –40°C to 125°C Ambient Operating TemperatureDevice HBM ESD Classification Level 2Device CDM ESD Classification Level C4BInput Voltage: 4 V–40 V (45 V Abs. Max.)Output Voltage: 4 V–75 V (80 V Abs. Max.)Fixed-Frequency Current-Mode Controller With Integrated Slope CompensationTwo Regulation Loops, Constant-Current Output and Constant-Voltage Output of Each ChannelHigh-Side Current Sense:150-mV or 300-mV Sense Voltage (EEPROM Option)±6-mV Offset (Achieving Approx. 4% or 2% LED Current Accuracy)Output Voltage Sense, Internal Voltage Reference: 2.2 V ±5%Integrated Low-Side NMOS-FET Driver: Peak Gate-Drive Current Typ. 0.7 AFrequency SynchronizationBoth PWM Dimming and Analog DimmingDiagnostic:High-Side Current (LED Current) Available as Analog OutputOpen-LED and Short-to-GND DetectionShorted Output ProtectionInternal Under- and Overvoltage Lockout
Description
AI
The TPS9260x-Q1 family of devices is a single-channel and dual-channel high-side-current LED driver. With full protection and diagnostics, this family of devices is dedicated for and ideally suited to automotive front lighting. The base of each independent driver is a peak-current-mode boost controller. Each controller has two independent feedback loops, a current-feedback loop with a high-side current-sensing shunt and a voltage-feedback loop with an external resistor-divider network. The controller delivers a constant output voltage or a constant output current. The connected load determines whether the device regulates a constant output current (if the circuit reaches the current set-point earlier than voltage set-point) or a constant output voltage (if the circuit reaches the voltage set-point is reached first, for example, in an open-load condition).
Each controller supports all typical topologies such as boost, boost-to-battery, SEPIC, or flyback.
Uses of the high-side PMOS FET driver are for PWM dimming of the LED string and for cutoff in case of an external short circuit to GND to protect the circuit.
The TPS9260x-Q1 family of devices is a single-channel and dual-channel high-side-current LED driver. With full protection and diagnostics, this family of devices is dedicated for and ideally suited to automotive front lighting. The base of each independent driver is a peak-current-mode boost controller. Each controller has two independent feedback loops, a current-feedback loop with a high-side current-sensing shunt and a voltage-feedback loop with an external resistor-divider network. The controller delivers a constant output voltage or a constant output current. The connected load determines whether the device regulates a constant output current (if the circuit reaches the current set-point earlier than voltage set-point) or a constant output voltage (if the circuit reaches the voltage set-point is reached first, for example, in an open-load condition).
Each controller supports all typical topologies such as boost, boost-to-battery, SEPIC, or flyback.
Uses of the high-side PMOS FET driver are for PWM dimming of the LED string and for cutoff in case of an external short circuit to GND to protect the circuit.