WL1831 Series
WiLink™ 8 industrial Wi-Fi, Bluetooth & Bluetooth Smart (Low energy) module
Manufacturer: Texas Instruments
Catalog(2 parts)
| Part | Serial Interfaces | Mounting Type | Utilized IC / Part | RF Family/Standard | Frequency▲▼ | Antenna Type | Protocol | Operating Temperature▲▼ | Operating Temperature▲▼ | Package / Case | Power - Output▲▼ | Modulation | Current - Receiving▲▼ | Current - Receiving▲▼ | Current - Transmitting▲▼ | Current - Transmitting▲▼ | Data Rate▲▼ | Sensitivity▲▼ | Voltage - Supply▲▼ | Voltage - Supply▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments WL1831GYFVRBluetooth, WiFi 802.11b/g/n, Bluetooth v5.1 Transceiver Module 2.4GHz Antenna Not Included Surface Mount | HCI, SDIO, UART | Surface Mount | WL18x1 | Bluetooth, WiFi | 2400000000 Hz | Antenna Not Included | 802.11b/g/n, Bluetooth v5.1 | -40 °C | 105 °C | |||||||||||
Texas Instruments WL1831MODGBMOCTBluetooth, WiFi 802.11b/g/n, Bluetooth 4.2 Transceiver Module 2.4GHz Surface Mount | SDIO, UART | Surface Mount | Bluetooth, WiFi | 2400000000 Hz | 802.11b/g/n, Bluetooth 4.2 | -20 °C | 70 °C | 100-SMD Module | 17.299999237060547 ul | CCK, DSSS, GFSK, OFDM | 0.08500000089406967 A | 0.04899999871850014 A | 0.23800000548362732 A | 0.41999998688697815 A | 56623104 bit/s | -96.3000030517578 ul | 2.9000000953674316 V | 4.800000190734863 V |
Key Features
• GeneralIntegrates RF, power amplifiers (PAs), clock, RF switches, filters, passives, and power managementQuick hardware design with TI module collateral and reference designsOperating temperature: –20°C to +70°CSmall form factor: 13.3 × 13.4 × 2 mm100-pin MOC packageFCC, IC, ETSI/CE, and TELEC certified with PCB, dipole, chip, and PIFA antennasWi-FiWLAN baseband processor and RF transceiver support of IEEE Std 802.11b, 802.11g, and 802.11n20- and 40-MHz SISO and 20-MHz 2 × 2 MIMO at 2.4 GHz for high throughput: 80 Mbps (TCP), 100 Mbps (UDP)2.4-GHz MRC support for extended rangeFully calibrated: production calibration not required4-bit SDIO host interface supportWi-Fi direct concurrent operation (multichannel, multirole)Bluetooth and Bluetooth low energy (WL183xMOD only)Bluetooth 5.1 secure connection compliant and CSA2 support (declaration ID: D032799)Host controller interface (HCI) transport for Bluetooth over UARTDedicated audio processor support of SBC encoding + A2DPDual-mode Bluetooth and Bluetooth low energyTI’s Bluetooth and Bluetooth low energy certified stackKey benefitsReduces design overheadDifferentiated use cases by configuring WiLink™ 8 simultaneously in two roles (STA and AP) to connect directly with other Wi-Fi devices on different RF channel (Wi-Fi networks)Best-in-class Wi-Fi with high-performance audio and video streaming reference applications with up to 1.4× the range versus one antennaDifferent provisioning methods for in-home devices connectivity to Wi-Fi in one stepLowest Wi-Fi power consumption in connected idle (< 800 µA)Configurable wake on WLAN filters to only wake up the systemWi-Fi and Bluetooth single antenna coexistenceGeneralIntegrates RF, power amplifiers (PAs), clock, RF switches, filters, passives, and power managementQuick hardware design with TI module collateral and reference designsOperating temperature: –20°C to +70°CSmall form factor: 13.3 × 13.4 × 2 mm100-pin MOC packageFCC, IC, ETSI/CE, and TELEC certified with PCB, dipole, chip, and PIFA antennasWi-FiWLAN baseband processor and RF transceiver support of IEEE Std 802.11b, 802.11g, and 802.11n20- and 40-MHz SISO and 20-MHz 2 × 2 MIMO at 2.4 GHz for high throughput: 80 Mbps (TCP), 100 Mbps (UDP)2.4-GHz MRC support for extended rangeFully calibrated: production calibration not required4-bit SDIO host interface supportWi-Fi direct concurrent operation (multichannel, multirole)Bluetooth and Bluetooth low energy (WL183xMOD only)Bluetooth 5.1 secure connection compliant and CSA2 support (declaration ID: D032799)Host controller interface (HCI) transport for Bluetooth over UARTDedicated audio processor support of SBC encoding + A2DPDual-mode Bluetooth and Bluetooth low energyTI’s Bluetooth and Bluetooth low energy certified stackKey benefitsReduces design overheadDifferentiated use cases by configuring WiLink™ 8 simultaneously in two roles (STA and AP) to connect directly with other Wi-Fi devices on different RF channel (Wi-Fi networks)Best-in-class Wi-Fi with high-performance audio and video streaming reference applications with up to 1.4× the range versus one antennaDifferent provisioning methods for in-home devices connectivity to Wi-Fi in one stepLowest Wi-Fi power consumption in connected idle (< 800 µA)Configurable wake on WLAN filters to only wake up the systemWi-Fi and Bluetooth single antenna coexistence
Description
AI
The certified WiLink™ 8 module from TI offers high throughput and extended range along with Wi-Fi®andBluetooth®coexistence (WL1835MOD only) in a power-optimized design. The WL18x5MOD device is a 2.4-GHz module, two antenna solution. The device is FCC, IC, ETSI/CE, and TELEC certified for AP and client. TI offers drivers for high-level operating systems such as Linux and Android™. Additional drivers, such as WinCE and RTOS, which includes QNX, Nucleus, ThreadX, and FreeRTOS, are supported through third parties.
The certified WiLink™ 8 module from TI offers high throughput and extended range along with Wi-Fi®andBluetooth®coexistence (WL1835MOD only) in a power-optimized design. The WL18x5MOD device is a 2.4-GHz module, two antenna solution. The device is FCC, IC, ETSI/CE, and TELEC certified for AP and client. TI offers drivers for high-level operating systems such as Linux and Android™. Additional drivers, such as WinCE and RTOS, which includes QNX, Nucleus, ThreadX, and FreeRTOS, are supported through third parties.