M24C64-F Series

64-Kbit serial I2C bus EEPROM

Catalog

64-Kbit serial I2C bus EEPROM

Part	Operating Temperature [Min]	Operating Temperature [Max]	Supplier Device Package	Memory Type	Memory Format	Mounting Type	Memory Size	Write Cycle Time - Word, Page	Access Time	Package / Case	Package / Case [custom]	Package / Case [custom]	Memory Interface	Memory Organization	Technology	Voltage - Supply [Max]	Voltage - Supply [Min]
STMicroelectronics M24C64-FDW5TP	-20 °C	85 C	8-TSSOP	Non-Volatile	EEPROM	Surface Mount	64 Kbit	5 ms	450 ns	8-TSSOP	0.173 "	4.4 mm	I2C	8 K	EEPROM	5.5 V	1.7 V
STMicroelectronics M24C64-FMC6TG	-40 °C	85 °C	8-UFDFPN (2x3)	Non-Volatile	EEPROM	Surface Mount	64 Kbit	5 ms	450 ns	8-UFDFN Exposed Pad			I2C	8 K	EEPROM	5.5 V	1.7 V
STMicroelectronics M24C64-FCS6TP/K	-40 °C	85 °C	5-WLCSP (0.96x1.07)	Non-Volatile	EEPROM	Surface Mount	64 Kbit	5 ms	450 ns	5-UFBGA WLCSP			I2C	8 K	EEPROM	5.5 V	1.7 V
STMicroelectronics M24C64M-FCU6T/TF	-40 °C	85 °C	4-WLCSP	Non-Volatile	EEPROM	Surface Mount	64 Kbit	5 ms	450 ns	4-XFBGA			I2C	8 K	EEPROM	5.5 V	1.7 V
STMicroelectronics M24C64-FMH6TG	-40 °C	85 °C	5-UFDFPN (1.7x1.4)	Non-Volatile	EEPROM	Surface Mount	64 Kbit	5 ms	450 ns	5-UFDFN			I2C	8 K	EEPROM	5.5 V	1.7 V

Catalog

64-Kbit serial I2C bus EEPROM

Key Features

- Compatible with following I2C bus modes:1 MHz400 kHz100 kHz

- Memory array:64 Kbit (8 Kbyte) of EEPROMPage size: 32 byteAdditional Write lockable page (M24C64-D order codes)

- Single supply voltage:1.7 V to 5.5 V over –40 °C / +85 °C1.6 V to 5.5 V over 0 °C / +85 °C

- Write:Byte write within 5 msPage write within 5 ms

- Random and sequential read modes

- Write protect of the whole memory array

- Enhanced ESD/latch-Up protection

- More than 4 million write cycles

- More than 200-years data retention

• Packages

- SO8N (ECOPACK2)

- TSSOP8 (ECOPACK2)

- UFDFPN (ECOPACK2)

- WLCSP (ECOPACK2)

- Unsawn wafer (each die is tested)

Description

The M24C64 is a 64-Kbit I2C-compatible EEPROM (electrically erasable programmable memory) organized as 8K × 8 bits. Over an ambient temperature range of -40 °C / +85 °C, the M24C64-W can operate with a supply voltage from 2.5 V to 5.5 V, the M24C64-R can operate with a supply voltage from 1.8 V to 5.5 V, and the M24C64-F and M24C64-DF can operate with a supply voltage from 1.7 V to 5.5 V ( the M24C64-F can also operate down to 1.6 V, under some restricting conditions). The M24C64-D offers an additional page, named the identification page (32 byte). The identification page can be used to store sensitive application parameters which can be (later) permanently locked in read-only mode.