TPS650 Series

Configurable multi-rail PMIC for Xilinx MPSoCs and FPGAs

Catalog(8 parts)

Part	Secondary Attributes	Supplied Contents	Type	Function	Primary Attributes	Supplier Device Package	Package / Case	RF Type	Utilized IC / Part	Board Type	Outputs and Type	Outputs and Type▲▼	Main Purpose	Voltage - Output▲▼	Voltage - Input▲▼	Voltage - Input▲▼	Current - Output▲▼	Frequency - Switching▲▼	Contents
Texas Instruments TPS650731EVM-430 TPS650731 Battery Charger, Power Supply Power Management Evaluation Board	I2C Interface(s)	Board(s)	Power Management	Battery Charger, Power Supply	Li-Ion Battery Charger With Power Path Management
Texas Instruments TPS65040ZQE RF Power Controller IC Cellular, W-CDMA, CDMA, GSM, UMTS 71-BGA Microstar Junior (5x5)						71-BGA Microstar Junior	71-VFBGA	CDMA, Cellular, GSM, UMTS, W-CDMA
Texas Instruments TPS6508641RSKR
Texas Instruments TPS65030EVM-162 TPS65030 - DC/DC, Step Down with LDO 4, Non-Isolated Outputs Evaluation Board		Board(s)							TPS65030	Fully Populated	Non-Isolated	4 ul, 4 ul	DC/DC, Step Down with LDO	1.5 V, 1.7999999523162842 V, 3.299999952316284 V, 5 V	5.25 V	3 V	0.02199999988079071 A, 0.05999999865889549 A, 0.10000000149011612 A, 0.20000000298023224 A	1000000 Hz	Board(s)
Texas Instruments TPS65055EVM-258 TPS65055 - DC/DC, Step Down with LDO 6, Non-Isolated Outputs Evaluation Board		Board(s)							TPS65055	Fully Populated	Non-Isolated	6 ul	DC/DC, Step Down with LDO		5.5 V	2.5 V	0.20000000298023224 A, 0.4000000059604645 A, 0.6000000238418579 A	2250000 Hz
Texas Instruments TPS65010EVM-230 TPS65010 - DC/DC, Step Down with LDO 4, Non-Isolated Outputs Evaluation Board		Board(s), Cable(s)							TPS65010	Fully Populated	Non-Isolated	4 ul	DC/DC, Step Down with LDO					1250000 Hz
Texas Instruments TPS65056EVM-195 TPS65056 - DC/DC, Step Down with LDO 6, Non-Isolated Outputs Evaluation Board		Board(s)							TPS65056	Fully Populated	6 Non-Isolated Outputs, Non-Isolated	6 ul	DC/DC, Step Down with LDO	1 V, 1.2999999523162842 V, 1.850000023841858 V, 3.299999952316284 V	6 V	2.5 V	0.20000000298023224 A, 0.4000000059604645 A, 0.6000000238418579 A, 1 A	2250000 Hz	Board(s)
Texas Instruments TPS65020EVM-110 TPS65020 - DC/DC, Step Down with LDO 5, Non-Isolated Outputs Evaluation Board		Board(s)							TPS65020	Fully Populated	Non-Isolated	5 ul	DC/DC, Step Down with LDO	1.100000023841858 V, 1.2999999523162842 V, 1.5499999523162842 V, 2.5 V, 3.299999952316284 V	5.5 V	3 V	0.05000000074505806 A, 0.800000011920929 A, 1 A, 1.2000000476837158 A

Key Features

• Wide VIN range from 5.6V to 21VThree variable-output voltage synchronous step-down controllers with D-CAP2™ TopologyScalable output current using external fets with selectable current limitI2C DVS control from 0.41V to 1.67V in 10mV steps or 1V to 3.575V in 25mV stepsThree variable-output voltage synchronous step-down converters with dcs-control topologyVIN range from 3V to 5.5VUp to 3 A of output currentI2C DVS control from 0.41V to 1.67V in 10mV steps or 0.425V to 3.575V in 25mV stepsThree LDO regulators with adjustable output voltageLDOA1: I2C-selectable voltage from 1.35V to 3.3V for up to 200mA of output currentLDOA2 and LDOA3: I2C-selectable voltage from 0.7V to 1.5V for up to 600mA of output current eachVTT LDO for DDR memory terminationThree load switches with slew rate controlUp to 300mA of output current with voltage drop less than 1.5% of nominal input voltageRDSON < 96mΩ at input voltage of 1.8V5V fixed-output voltage LDO (LDO5)Power supply for gate drivers of SMPS and for LDOA1Automatic switch to external 5V buck for higher efficiencyBuilt-in flexibility and configurability by factory OTP programmingSix GPI pins configurable to enable (CTL1 to CTL6) or sleep mode entry (CTL3 and CTL6) of any selected railsFour GPO pins configurable to power good of any selected railsOpen-drain interrupt output pinI2C interface supports standard mode (100kHz), fast mode (400kHz), and fast mode plus (1MHz)Wide VIN range from 5.6V to 21VThree variable-output voltage synchronous step-down controllers with D-CAP2™ TopologyScalable output current using external fets with selectable current limitI2C DVS control from 0.41V to 1.67V in 10mV steps or 1V to 3.575V in 25mV stepsThree variable-output voltage synchronous step-down converters with dcs-control topologyVIN range from 3V to 5.5VUp to 3 A of output currentI2C DVS control from 0.41V to 1.67V in 10mV steps or 0.425V to 3.575V in 25mV stepsThree LDO regulators with adjustable output voltageLDOA1: I2C-selectable voltage from 1.35V to 3.3V for up to 200mA of output currentLDOA2 and LDOA3: I2C-selectable voltage from 0.7V to 1.5V for up to 600mA of output current eachVTT LDO for DDR memory terminationThree load switches with slew rate controlUp to 300mA of output current with voltage drop less than 1.5% of nominal input voltageRDSON < 96mΩ at input voltage of 1.8V5V fixed-output voltage LDO (LDO5)Power supply for gate drivers of SMPS and for LDOA1Automatic switch to external 5V buck for higher efficiencyBuilt-in flexibility and configurability by factory OTP programmingSix GPI pins configurable to enable (CTL1 to CTL6) or sleep mode entry (CTL3 and CTL6) of any selected railsFour GPO pins configurable to power good of any selected railsOpen-drain interrupt output pinI2C interface supports standard mode (100kHz), fast mode (400kHz), and fast mode plus (1MHz)

Description

The TPS650864 device family is a single-chip power-management IC (PMIC) designed for Xilinx Zynq multiprocessor system-on-chip (MPSoCs) and field programmable gate array (FPGA) families. The TPS650864 offers an input range of 5.6V to 21V, enabling a wide range of applications (see the Device Comparison Table). The device is targeted for wall-powered applications or 2S, 3S, or 4S Li-Ion battery packs (NVDC or non-NVDC power architectures). See the Typical Application section for 5V input supplies. The D-CAP2 and DCS-Control high-frequency voltage regulators use small passives to achieve a small solution size. The D-CAP2 and DCS-Control topologies have excellent transient response performance, ideal for processor core and system memory rails that have fast load switching. An I2C interface allows simple control either by an embedded controller (EC) or by an SoC. The PMIC comes in an 8mm × 8mm, single-row VQFN package with thermal pad for good thermal dissipation. The TPS650864 device family is a single-chip power-management IC (PMIC) designed for Xilinx Zynq multiprocessor system-on-chip (MPSoCs) and field programmable gate array (FPGA) families. The TPS650864 offers an input range of 5.6V to 21V, enabling a wide range of applications (see the Device Comparison Table). The device is targeted for wall-powered applications or 2S, 3S, or 4S Li-Ion battery packs (NVDC or non-NVDC power architectures). See the Typical Application section for 5V input supplies. The D-CAP2 and DCS-Control high-frequency voltage regulators use small passives to achieve a small solution size. The D-CAP2 and DCS-Control topologies have excellent transient response performance, ideal for processor core and system memory rails that have fast load switching. An I2C interface allows simple control either by an embedded controller (EC) or by an SoC. The PMIC comes in an 8mm × 8mm, single-row VQFN package with thermal pad for good thermal dissipation.