TPS60120 Series
Regulated 3.3V high efficiency charge pump DC/DC converter with low-battery detector
Manufacturer: Texas Instruments
Catalog(2 parts)
| Part | Mounting Type | Current - Output▲▼ | Package / Case▲▼ | Package / Case | Package / Case▲▼ | Frequency - Switching▲▼ | Output Configuration | Operating Temperature▲▼ | Operating Temperature▲▼ | Number of Outputs▲▼ | Supplier Device Package | Synchronous Rectifier▲▼ | Function | Voltage - Input (Min)▲▼ | Output Type▲▼ | Voltage - Output (Min/Fixed)▲▼ | Voltage - Input (Max)▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS60120PWPRCharge Pump Switching Regulator IC Positive Fixed 3.3V 1 Output 200mA 20-PowerTSSOP (0.173", 4.40mm Width) | Surface Mount | 0.20000000298023224 A | 0.004394200164824724 m | 20-PowerTSSOP | 0.004399999976158142 m | 320000 Hz | Positive | 85 °C | -40 °C | 1 ul | 20-HTSSOP | Step-Up | 1.7999999523162842 V | 27.030000686645508 °C/W | 3.299999952316284 V | 3.5999999046325684 V | |
Texas Instruments TPS60120PWPCharge Pump Switching Regulator IC Positive Fixed 3.3V 1 Output 200mA 20-PowerTSSOP (0.173", 4.40mm Width) | Surface Mount | 0.20000000298023224 A | 0.004394200164824724 m | 20-PowerTSSOP | 0.004399999976158142 m | 320000 Hz | Positive | 85 °C | -40 °C | 1 ul | 20-HTSSOP | Step-Up | 1.7999999523162842 V | 27.030000686645508 °C/W | 3.299999952316284 V | 3.5999999046325684 V |
Key Features
• High Average Efficiency Over Input Voltage Range Because of Special Switching TopologyMinimum 200-mA Output Current From an Input Voltage Range of 1.8-V to 3.6-VRegulated 3.3-V or 3-V ±4% Output VoltageNo Inductors Required, Low EMIOnly Four External Components Required55-uA Quiescent Supply Current0.05-uA Shutdown CurrentLoad Disconnected in ShutdownIntegrated Low Battery and Power Good DetectorsEvaluation Module Available (TPS60120EVM-142)ApplicationsApplications Powered by Two Battery CellsPortable InstrumentsBattery-Powered Microprocessor SystemsMiniature EquipmentBackup-Battery Boost ConvertersPDAs, Organizers, LaptopsMP-3 Portable Audio PlayersHandheld InstrumentationMedical Instruments (e.g., Glucose Meters)Cordless PhonesPowerPAD is a trademark of Texas Instruments Incorporated.High Average Efficiency Over Input Voltage Range Because of Special Switching TopologyMinimum 200-mA Output Current From an Input Voltage Range of 1.8-V to 3.6-VRegulated 3.3-V or 3-V ±4% Output VoltageNo Inductors Required, Low EMIOnly Four External Components Required55-uA Quiescent Supply Current0.05-uA Shutdown CurrentLoad Disconnected in ShutdownIntegrated Low Battery and Power Good DetectorsEvaluation Module Available (TPS60120EVM-142)ApplicationsApplications Powered by Two Battery CellsPortable InstrumentsBattery-Powered Microprocessor SystemsMiniature EquipmentBackup-Battery Boost ConvertersPDAs, Organizers, LaptopsMP-3 Portable Audio PlayersHandheld InstrumentationMedical Instruments (e.g., Glucose Meters)Cordless PhonesPowerPAD is a trademark of Texas Instruments Incorporated.
Description
AI
The TPS6012x step-up, regulated charge pumps generate a 3.3-V or 3-V ±4% output voltage from a 1.8-V to 3.6-V input voltage (two alkaline, NiCd, or NiMH batteries). They can deliver an output current of at least 200 mA (100 mA for the TPS60122 and TPS60123), all from a 2-V input. Four external capacitors are needed to build a complete high efficiency dc/dc charge pump converter. To achieve the high efficiency over a wide input voltage range, the charge pump automatically selects between a 1.5x or doubler conversion mode. From a 2-V input, all ICs can start with full load current.
The devices feature the power-saving pulse-skip mode to extend battery life at light loads. TPS60120, TPS60122, and TPS60124 include a low battery comparator. TPS60121, TPS60123, and TPS60125 feature a power-good output. The logic shutdown function reduces the supply current to a maximum of 1uA and disconnects the load from the input. Special current-control circuitry prevents excessive current from being drawn from the battery during start-up. This dc/dc converter requires no inductors, therefore EMI is of low concern. It is available in the small, thermally enhanced 20-pin PowerPADTMpackage (PWP).
The TPS6012x step-up, regulated charge pumps generate a 3.3-V or 3-V ±4% output voltage from a 1.8-V to 3.6-V input voltage (two alkaline, NiCd, or NiMH batteries). They can deliver an output current of at least 200 mA (100 mA for the TPS60122 and TPS60123), all from a 2-V input. Four external capacitors are needed to build a complete high efficiency dc/dc charge pump converter. To achieve the high efficiency over a wide input voltage range, the charge pump automatically selects between a 1.5x or doubler conversion mode. From a 2-V input, all ICs can start with full load current.
The devices feature the power-saving pulse-skip mode to extend battery life at light loads. TPS60120, TPS60122, and TPS60124 include a low battery comparator. TPS60121, TPS60123, and TPS60125 feature a power-good output. The logic shutdown function reduces the supply current to a maximum of 1uA and disconnects the load from the input. Special current-control circuitry prevents excessive current from being drawn from the battery during start-up. This dc/dc converter requires no inductors, therefore EMI is of low concern. It is available in the small, thermally enhanced 20-pin PowerPADTMpackage (PWP).