Zenode.ai Logo

TPS5450 Series

5.5V to 36V Input, 5A, 500kHz Step Down Converter

Manufacturer: Texas Instruments

Catalog(5 parts)

PartVoltage - InputVoltage - InputOutputs and TypeOutputs and TypeMain PurposeFrequency - SwitchingSupplied ContentsVoltage - OutputBoard TypeUtilized IC / PartCurrent - OutputGradeOperating TemperatureOperating TemperatureOutput ConfigurationSynchronous RectifierTopologyFunctionOutput TypeQualificationVoltage - Input (Max)Mounting TypeVoltage - Input (Min)Voltage - Output (Max)Package / CasePackage / CasePackage / CaseSupplier Device PackageVoltage - Output (Min/Fixed)Number of Outputs
Texas Instruments
TPS5450EVM-254
TPS5450 SWIFT™ DC/DC, Step Down 1, Non-Isolated Outputs Evaluation Board
10 V
31 V
Non-Isolated
1 ul
DC/DC, Step Down
500000 Hz
Board(s)
5 V
Fully Populated
TPS5450
5 A
Texas Instruments
TPS5450MDDAREP
Buck Switching Regulator IC Positive Adjustable 1.221V 1 Output 5A 8-PowerSOIC (0.154", 3.90mm Width)
500000 Hz
5 A
Automotive
125 °C
-55 °C
Positive
Buck
Step-Down
Adjustable
AEC-Q100
36 V
Surface Mount
5.5 V
32.040000915527344 V
0.003899999894201755 m
8-PowerSOIC
0.003911599982529879 m
8-SO PowerPad
1.2209999561309814 V
1 ul
Texas Instruments
TPS5450DDARG4
Buck Switching Regulator IC Positive Adjustable 1.221V 1 Output 5A 8-PowerSOIC (0.154", 3.90mm Width)
500000 Hz
5 A
125 °C
-40 °C
Positive
Buck
Step-Down
Adjustable
36 V
Surface Mount
5.5 V
0.003899999894201755 m
8-PowerSOIC
0.003911599982529879 m
8-SO PowerPad
1.2209999561309814 V
1 ul
Texas Instruments
TPS5450QDDARQ1
Buck Switching Regulator IC Positive Adjustable 1.221V 1 Output 5A 8-PowerSOIC (0.154", 3.90mm Width)
500000 Hz
5 A
Automotive
125 °C
-40 °C
Positive
Buck
Step-Down
Adjustable
AEC-Q100
36 V
Surface Mount
5.5 V
32.040000915527344 V
0.003899999894201755 m
8-PowerSOIC
0.003911599982529879 m
8-SO PowerPad
1.2209999561309814 V
1 ul
Texas Instruments
TPS5450DDAG4
Buck Switching Regulator IC Positive Adjustable 1.221V 1 Output 5A 8-PowerSOIC (0.154", 3.90mm Width)
500000 Hz
5 A
125 °C
-40 °C
Positive
Buck
Step-Down
Adjustable
36 V
Surface Mount
5.5 V
0.003899999894201755 m
8-PowerSOIC
0.003911599982529879 m
8-SO PowerPad
1.2209999561309814 V
1 ul

Key Features

Wide input voltage range: 5.5 V to 36 VUp to 5-A continuous (6-A peak) output currentHigh efficiency greater than 90% enabled by 110-mΩ integrated MOSFET switchWide output voltage range: adjustable down to 1.22 V with 1.5% initial accuracyInternal compensation minimizes external part countFixed 500-kHz switching frequency for small filter size18-µA shutdown supply currentImproved line regulation and transient response by input voltage feedforwardSystem protected by overcurrent limiting, overvoltage protection, and thermal shutdown–40°C to 125°C operating junction temperature rangeAvailable in small thermally enhanced 8-pin SOIC PowerPAD™ packageWide input voltage range: 5.5 V to 36 VUp to 5-A continuous (6-A peak) output currentHigh efficiency greater than 90% enabled by 110-mΩ integrated MOSFET switchWide output voltage range: adjustable down to 1.22 V with 1.5% initial accuracyInternal compensation minimizes external part countFixed 500-kHz switching frequency for small filter size18-µA shutdown supply currentImproved line regulation and transient response by input voltage feedforwardSystem protected by overcurrent limiting, overvoltage protection, and thermal shutdown–40°C to 125°C operating junction temperature rangeAvailable in small thermally enhanced 8-pin SOIC PowerPAD™ package

Description

AI
The TPS5450 is a high-output-current PWM converter that integrates a low-resistance, high-side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 5.5 V; an internally set slow-start circuit to limit inrush currents; and a voltage feed-forward circuit to improve the transient response. Using the ENA pin, shutdown supply current is reduced to 18 µA typically. Other features include an active-high enable, overcurrent limiting, overvoltage protection and thermal shutdown. To reduce design complexity and external component count, the TPS5450 feedback loop is internally compensated. The TPS5450 device is available in a thermally-enhanced, 8-pin SOIC PowerPAD package. TI provides evaluation modules and software tool to aid in achieving high-performance power supply designs to meet aggressive equipment development cycles. The TPS5450 is a high-output-current PWM converter that integrates a low-resistance, high-side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 5.5 V; an internally set slow-start circuit to limit inrush currents; and a voltage feed-forward circuit to improve the transient response. Using the ENA pin, shutdown supply current is reduced to 18 µA typically. Other features include an active-high enable, overcurrent limiting, overvoltage protection and thermal shutdown. To reduce design complexity and external component count, the TPS5450 feedback loop is internally compensated. The TPS5450 device is available in a thermally-enhanced, 8-pin SOIC PowerPAD package. TI provides evaluation modules and software tool to aid in achieving high-performance power supply designs to meet aggressive equipment development cycles.