Catalog(3 parts)
| Part | Supplier Device Package | Package / Case | Topology | Voltage - Output (Min/Fixed)▲▼ | Synchronous Rectifier▲▼ | Voltage - Input (Max)▲▼ | Output Configuration | Number of Outputs▲▼ | Voltage - Output (Max)▲▼ | Function | Frequency - Switching▲▼ | Frequency - Switching▲▼ | Voltage - Input (Min)▲▼ | Operating Temperature▲▼ | Operating Temperature▲▼ | Output Type | Mounting Type | Current - Output▲▼ | Voltage - Output▲▼ | Voltage - Input▲▼ | Voltage - Input▲▼ | Board Type | Main Purpose | Outputs and Type | Outputs and Type▲▼ | Frequency - Switching▲▼ | Supplied Contents | Utilized IC / Part |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS5401DGQRBuck Switching Regulator IC Positive Adjustable 0.8V 1 Output 500mA 10-PowerTFSOP, 10-MSOP (0.118", 3.00mm Width) | 10-HVSSOP | 10-MSOP, 10-PowerTFSOP | Buck | 0.800000011920929 V | 42 V | Positive | 1 ul | 39 V | Step-Down | 100000 Hz | 2500000 Hz | 3.5 V | 150 °C | -40 °C | Adjustable | Surface Mount | 0.5 A | |||||||||||
Texas Instruments TPS5401EVM-708TPS5401 SWIFT™ DC/DC, Step Down 1, Non-Isolated Outputs Evaluation Board | 0.5 A | 5 V | 7.5 V | 35 V | Fully Populated | DC/DC, Step Down | Non-Isolated | 1 ul | 700000 Hz | Board(s) | TPS5401 | |||||||||||||||||
Texas Instruments TPS5401DGQTBuck Switching Regulator IC Positive Adjustable 0.8V 1 Output 500mA 10-PowerTFSOP, 10-MSOP (0.118", 3.00mm Width) | 10-HVSSOP | 10-MSOP, 10-PowerTFSOP | Buck | 0.800000011920929 V | 42 V | Positive | 1 ul | 39 V | Step-Down | 100000 Hz | 2500000 Hz | 3.5 V | 150 °C | -40 °C | Adjustable | Surface Mount | 0.5 A |
Key Features
• 3.5-V to 42-V Input Voltage Range200-mΩ High-Side MOSFETHigh Efficiency at Light Loads With a Pulse-Skipping Eco-mode™ Control Scheme116-µA Operating Quiescent Current1.3-µA Shutdown Current100-kHz to 2.5-MHz Switching FrequencySynchronizes to External ClockAdjustable Slow Start/SequencingUV and OV Power-Good OutputAdjustable UVLO Voltage and Hysteresis0.8-V ±3.5% Internal Voltage ReferenceMSOP10 With PowerPAD PackageSupported byWEBENCHAPPLICATIONS12-V and 24-V Industrial and CommercialLow-Power SystemsE-MetersAll other trademarks are the property of their respective owners3.5-V to 42-V Input Voltage Range200-mΩ High-Side MOSFETHigh Efficiency at Light Loads With a Pulse-Skipping Eco-mode™ Control Scheme116-µA Operating Quiescent Current1.3-µA Shutdown Current100-kHz to 2.5-MHz Switching FrequencySynchronizes to External ClockAdjustable Slow Start/SequencingUV and OV Power-Good OutputAdjustable UVLO Voltage and Hysteresis0.8-V ±3.5% Internal Voltage ReferenceMSOP10 With PowerPAD PackageSupported byWEBENCHAPPLICATIONS12-V and 24-V Industrial and CommercialLow-Power SystemsE-MetersAll other trademarks are the property of their respective owners
Description
AI
The TPS5401 device is a 42-V, 0.5-A, step-down regulator with an integrated high-side MOSFET. Current-mode control provides simple external compensation and flexible component selection. A low-ripple pulse-skip mode reduces the supply current to 116 µA when outputting regulated voltage with no load. Using the enable pin, shutdown supply current is reduced to 1.3 µA when the enable pin is low.
Undervoltage lockout is internally set at 2.5 V, but can be increased using the enable pin. The output voltage start-up ramp is controlled by the slow-start pin that can also be configured for sequencing/tracking. An open-drain power-good signal indicates the output is within 94% to 107% of its nominal voltage.
A wide switching-frequency range allows efficiency and external component size optimization. Frequency foldback and thermal shutdown protect the part during an overload condition.
The TPS5401 is available in a 10-pin thermally enhanced MSOP PowerPAD package.
The TPS5401 device is a 42-V, 0.5-A, step-down regulator with an integrated high-side MOSFET. Current-mode control provides simple external compensation and flexible component selection. A low-ripple pulse-skip mode reduces the supply current to 116 µA when outputting regulated voltage with no load. Using the enable pin, shutdown supply current is reduced to 1.3 µA when the enable pin is low.
Undervoltage lockout is internally set at 2.5 V, but can be increased using the enable pin. The output voltage start-up ramp is controlled by the slow-start pin that can also be configured for sequencing/tracking. An open-drain power-good signal indicates the output is within 94% to 107% of its nominal voltage.
A wide switching-frequency range allows efficiency and external component size optimization. Frequency foldback and thermal shutdown protect the part during an overload condition.
The TPS5401 is available in a 10-pin thermally enhanced MSOP PowerPAD package.