Zenode.ai Logo

CD74HCT4520 Series

High Speed CMOS Logic Dual Binary Up-Counters

Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/

Catalog

High Speed CMOS Logic Dual Binary Up-Counters

PartTrigger TypeNumber of Bits per ElementNumber of Elements [custom]Voltage - Supply [Max]Voltage - Supply [Min]Package / CasePackage / CaseLogic TypeOperating Temperature [Min]Operating Temperature [Max]DirectionMounting TypeTimingCount RateResetSupplier Device Package
Texas Instruments
CD74HCT4520E
Negative, Positive
4
2
5.5 V
4.5 V
0.3 in, 7.62 mm
16-DIP
Binary Counter
-55 °C
125 °C
Up
Through Hole
Synchronous
25 MHz
Asynchronous
16-PDIP
Texas Instruments
CD74HCT4520M96
Negative, Positive
4
2
5.5 V
4.5 V
0.154 in, 3.9 mm Width
16-SOIC
Binary Counter
-55 °C
125 °C
Up
Surface Mount
Synchronous
25 MHz
Asynchronous
16-SOIC

Key Features

Positive or Negative Edge TriggeringSynchronous Internal Carry PropagationFanout (Over Temperature Range)Standard Outputs...10 LSTTL LoadsBus Driver Outputs...15 LSTTL LoadsWide Operating Temperature Range... –55°C to 125°CBalanced Propagation Delay and Transition TimesSignificant Power Reduction Compared to LSTTL Logic ICsHC Types2V to 6V OperationHigh Noise Immunity: NIL= 30%, NIH= 30% of VCCat VCC= 5VHCT Types4.5V to 5.5V OperationDirect LSTTL Input Logic Compatibility, VIL= 0.8V (Max), VIH= 2V (Min)CMOS Input Compatibility, Il1µA at VOL, VOHPositive or Negative Edge TriggeringSynchronous Internal Carry PropagationFanout (Over Temperature Range)Standard Outputs...10 LSTTL LoadsBus Driver Outputs...15 LSTTL LoadsWide Operating Temperature Range... –55°C to 125°CBalanced Propagation Delay and Transition TimesSignificant Power Reduction Compared to LSTTL Logic ICsHC Types2V to 6V OperationHigh Noise Immunity: NIL= 30%, NIH= 30% of VCCat VCC= 5VHCT Types4.5V to 5.5V OperationDirect LSTTL Input Logic Compatibility, VIL= 0.8V (Max), VIH= 2V (Min)CMOS Input Compatibility, Il1µA at VOL, VOH

Description

AI
The CD74HC4518 is a dual BCD up-counter. The ’HC4520 and CD74HCT4520 are dual binary up-counters. Each device consists of two independent internally synchronous 4-stage counters. The counter stages are D-type flip-flops having interchangeable CLOCK and ENABLE lines for incrementing on either the positive-going or the negative-going transition of CLOCK. The counters are cleared by high levels on the MASTER RESET lines. The counter can be cascaded in the ripple mode by connecting Q3to the ENABLE input of the subsequent counter while the CLOCK input of the latter is held low. The CD74HC4518 is a dual BCD up-counter. The ’HC4520 and CD74HCT4520 are dual binary up-counters. Each device consists of two independent internally synchronous 4-stage counters. The counter stages are D-type flip-flops having interchangeable CLOCK and ENABLE lines for incrementing on either the positive-going or the negative-going transition of CLOCK. The counters are cleared by high levels on the MASTER RESET lines. The counter can be cascaded in the ripple mode by connecting Q3to the ENABLE input of the subsequent counter while the CLOCK input of the latter is held low.