Catalog(3 parts)
| Part | Package / Case | Voltage - Input (Max)▲▼ | Operating Temperature▲▼ | Operating Temperature▲▼ | Current - Output▲▼ | Frequency - Switching▲▼ | Synchronous Rectifier▲▼ | Number of Outputs▲▼ | Mounting Type | Topology | Qualification | Output Type▲▼ | Supplier Device Package | Grade | Voltage - Output (Min/Fixed)▲▼ | Output Configuration | Voltage - Input (Min)▲▼ | Function |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS62152AQRGTRQ1Buck Switching Regulator IC Positive Fixed 3.3V 1 Output 1A 16-VFQFN Exposed Pad | 16-VFQFN Exposed Pad | 17 V | 125 °C | -40 °C | 1 A | 1250000 Hz, 2500000 Hz | 1 ul | Surface Mount | Buck | AEC-Q100 | 27.030000686645508 °C/W | 16-VQFN (3x3) | Automotive | 3.299999952316284 V | Positive | 3 V | Step-Down | |
Texas Instruments TPS62152RGTTBuck Switching Regulator IC Positive Fixed 3.3V 1 Output 1A 16-VFQFN Exposed Pad | 16-VFQFN Exposed Pad | 17 V | 85 °C | -40 °C | 1 A | 2500000 Hz | 1 ul | Surface Mount | Buck | 27.030000686645508 °C/W | 16-VQFN (3x3) | 3.299999952316284 V | Positive | 3 V | Step-Down | |||
Texas Instruments TPS62152RGTRBuck Switching Regulator IC Positive Fixed 3.3V 1 Output 1A 16-VFQFN Exposed Pad | 16-VFQFN Exposed Pad | 17 V | 85 °C | -40 °C | 1 A | 2500000 Hz | 1 ul | Surface Mount | Buck | 27.030000686645508 °C/W | 16-VQFN (3x3) | 3.299999952316284 V | Positive | 3 V | Step-Down |
Key Features
• DCS-Control™ topologyInput voltage range: 3 V to 17 VUp to 1-A output currentAdjustable output voltage from 0.9 V to 6 VPin-selectable output voltage (nominal, +5%)Programmable soft start and trackingSeamless power-save mode transitionQuiescent current of 17 µA (typ.)Selectable operating frequencyPower-good output100% duty-cycle modeShort-circuit protectionOvertemperature protectionPin-to-pin compatible with theTPS62130andTPS62140Available in a 3-mm × 3-mm, VQFN-16 packageUse theTPS82150module for faster designsDCS-Control™ topologyInput voltage range: 3 V to 17 VUp to 1-A output currentAdjustable output voltage from 0.9 V to 6 VPin-selectable output voltage (nominal, +5%)Programmable soft start and trackingSeamless power-save mode transitionQuiescent current of 17 µA (typ.)Selectable operating frequencyPower-good output100% duty-cycle modeShort-circuit protectionOvertemperature protectionPin-to-pin compatible with theTPS62130andTPS62140Available in a 3-mm × 3-mm, VQFN-16 packageUse theTPS82150module for faster designs
Description
AI
The TPS6215x family is an easy-to-use synchronous step down dc-dc converter optimized for applications with high power density. A high switching frequency of typically 2.5 MHz allows the use of small inductors and provides fast transient response as well as high output-voltage accuracy by the use of DCS-Control topology.
With their wide operating input-voltage range of 3 V to 17 V, the devices are ideally suited for systems powered from either Li-Ion or other batteries as well as from 12-V intermediate power rails. The devices support up to 1-A continuous output current at output voltages between 0.9 V and 6 V (in 100% duty-cycle mode). The soft-start pin controls the output-voltage start-up ramp, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the enable (EN) and open-drain power-good (PG) pins.
In power-save mode, the devices draw quiescent current of about 17 µA from VIN. Power-save-mode, entered automatically and seamlessly if the load is small, maintains high efficiency over the entire load range. In shutdown mode, the device turns off and current consumption is less than 2 µA.
The device, available in adjustable- and fixed-output-voltage versions, comes in a 16-pin VQFN package measuring 3 × 3 mm (RGT).
The TPS6215x family is an easy-to-use synchronous step down dc-dc converter optimized for applications with high power density. A high switching frequency of typically 2.5 MHz allows the use of small inductors and provides fast transient response as well as high output-voltage accuracy by the use of DCS-Control topology.
With their wide operating input-voltage range of 3 V to 17 V, the devices are ideally suited for systems powered from either Li-Ion or other batteries as well as from 12-V intermediate power rails. The devices support up to 1-A continuous output current at output voltages between 0.9 V and 6 V (in 100% duty-cycle mode). The soft-start pin controls the output-voltage start-up ramp, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the enable (EN) and open-drain power-good (PG) pins.
In power-save mode, the devices draw quiescent current of about 17 µA from VIN. Power-save-mode, entered automatically and seamlessly if the load is small, maintains high efficiency over the entire load range. In shutdown mode, the device turns off and current consumption is less than 2 µA.
The device, available in adjustable- and fixed-output-voltage versions, comes in a 16-pin VQFN package measuring 3 × 3 mm (RGT).