TLV9052 Series

Dual, 5.5-V, 5-MHz, 15-V/μs slew rate, RRIO operational amplifier for cost-optimized applications

Catalog(4 parts)

Part	Slew Rate▲▼	Operating Temperature▲▼	Operating Temperature▲▼	Supplier Device Package	Voltage - Input Offset▲▼	Amplifier Type	Mounting Type	Voltage - Supply Span (Max)▲▼	Output Type	Number of Circuits▲▼	Voltage - Supply Span (Min)▲▼	Package / Case	Current - Supply▲▼	Current - Output / Channel▲▼	Gain Bandwidth Product▲▼	Current - Input Bias▲▼	Package / Case▲▼	Package / Case▲▼
Texas Instruments TLV9052IPWR CMOS Amplifier 2 Circuit Rail-to-Rail 8-TSSOP	15000000 V/s	125 °C	-40 °C	8-TSSOP	0.00033000000985339284 V	CMOS	Surface Mount	5.5 V	Rail-to-Rail	2 ul	1.7999999523162842 V	8-TSSOP (0.173", 4.40mm Width)	0.00033000000985339284 A	0.05000000074505806 A	5000000 Hz	1.9999999920083944e-12 A
Texas Instruments TLV9052IDDFR CMOS Amplifier 2 Circuit Rail-to-Rail TSOT-23-8	15000000 V/s	125 °C	-40 °C	TSOT-23-8	0.00033000000985339284 V	CMOS	Surface Mount	5.5 V	Rail-to-Rail	2 ul	1.7999999523162842 V	SOT-23-8 Thin, TSOT-23-8	0.00033000000985339284 A	0.05000000074505806 A	5000000 Hz	1.9999999920083944e-12 A
Texas Instruments TLV9052IDGKR CMOS Amplifier 2 Circuit Rail-to-Rail 8-VSSOP	15000000 V/s	125 °C	-40 °C		0.00033000000985339284 V	CMOS	Surface Mount	5.5 V	Rail-to-Rail	2 ul	1.7999999523162842 V	8-MSOP, 8-TSSOP	0.00033000000985339284 A	0.05000000074505806 A	5000000 Hz	1.9999999920083944e-12 A	0.0029972000047564507 m	0.003000000026077032 m
Texas Instruments TLV9052IDSGR CMOS Amplifier 2 Circuit Rail-to-Rail 8-WSON (2x2)	15000000 V/s	125 °C	-40 °C	8-WSON (2x2)	0.00033000000985339284 V	CMOS	Surface Mount	5.5 V	Rail-to-Rail	2 ul	1.7999999523162842 V	8-WFDFN Exposed Pad	0.00033000000985339284 A	0.05000000074505806 A	5000000 Hz	1.9999999920083944e-12 A

Key Features

• High slew rate: 15V/µsLow quiescent current: 330µARail-to-rail input and outputLow input offset voltage: ±0.33mVUnity-gain bandwidth: 5MHzLow broadband noise: 15nV/√ HzLow input bias current: 2pAUnity-gain stableInternal RFI and EMI filterScalable family of CMOS op amps for low-cost applicationsOperational at supply voltages as low as 1.8VExtended temperature range: –40°C to 125°CHigh slew rate: 15V/µsLow quiescent current: 330µARail-to-rail input and outputLow input offset voltage: ±0.33mVUnity-gain bandwidth: 5MHzLow broadband noise: 15nV/√ HzLow input bias current: 2pAUnity-gain stableInternal RFI and EMI filterScalable family of CMOS op amps for low-cost applicationsOperational at supply voltages as low as 1.8VExtended temperature range: –40°C to 125°C

Description

The TLV9051, TLV9052, and TLV9054 devices are single, dual, and quad operational amplifiers, respectively. The devices are designed for low voltage operation from 1.8V to 6.0V. The inputs and outputs can operate from rail to rail at a very high slew rate. These devices are an excellent choice for cost-constrained applications where low-voltage operation, high slew rate, and low quiescent current is needed. The capacitive-load drive of the TLV905x family is 150pF, and the resistive open-loop output impedance makes stabilization easier with much higher capacitive loads. The TLV905xS devices include a shutdown mode that allow the amplifiers to be switched off into a standby mode with typical current consumption less than 1µA. The TLV905x family is easy to use due to the devices being unity-gain stable, including a RFI and EMI filter, and being free from phase reversal in an overdrive condition. The TLV9051, TLV9052, and TLV9054 devices are single, dual, and quad operational amplifiers, respectively. The devices are designed for low voltage operation from 1.8V to 6.0V. The inputs and outputs can operate from rail to rail at a very high slew rate. These devices are an excellent choice for cost-constrained applications where low-voltage operation, high slew rate, and low quiescent current is needed. The capacitive-load drive of the TLV905x family is 150pF, and the resistive open-loop output impedance makes stabilization easier with much higher capacitive loads. The TLV905xS devices include a shutdown mode that allow the amplifiers to be switched off into a standby mode with typical current consumption less than 1µA. The TLV905x family is easy to use due to the devices being unity-gain stable, including a RFI and EMI filter, and being free from phase reversal in an overdrive condition.