LM5022 Series
6-60V Wide Vin, current mode boost, SEPIC and Flyback controller
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
6-60V Wide Vin, current mode boost, SEPIC and Flyback controller
| Part | Control Features | Function | Output Type | Number of Outputs | Operating Temperature [Max] | Operating Temperature [Min] | Frequency - Switching [Min] | Frequency - Switching [Max] | Output Phases | Mounting Type | Supplier Device Package | Duty Cycle (Max) [Max] | Clock Sync | Synchronous Rectifier | Topology | Output Configuration | Package / Case | Board Type | Supplied Contents | Utilized IC / Part | Main Purpose | Voltage - Input [Max] | Voltage - Input [Min] | Outputs and Type | Outputs and Type | Current - Output | Regulator Topology | Voltage - Output | Frequency - Switching | Features | Current - Output / Channel | Qualification | Grade |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments LM5022MMX | Frequency Control, Soft Start | Step-Up, Step-Up/Step-Down | Transistor Driver | 1 | 125 ¯C | -40 °C | 200 kHz | 990 kHz | 1 | Surface Mount | 10-VSSOP | 95 % | Boost, SEPIC | Positive | 10-MSOP, 10-TFSOP | ||||||||||||||||||
Texas Instruments LM5022MME/NOPB | Frequency Control, Soft Start | Step-Up, Step-Up/Step-Down | Transistor Driver | 1 | 125 ¯C | -40 °C | 200 kHz | 990 kHz | 1 | Surface Mount | 10-VSSOP | 95 % | Boost, SEPIC | Positive | 10-MSOP, 10-TFSOP | ||||||||||||||||||
Texas Instruments LM5022SEPBLDT/NOPB | Bare (Unpopulated) | Board(s) | |||||||||||||||||||||||||||||||
Texas Instruments LM5022EVAL/NOPB | Fully Populated | Board(s) | LM5022 | DC/DC, Step Up | 16 V | 9 VDC | Non-Isolated | 1 | 500 mA | Boost | 40 V | 500 kHz | |||||||||||||||||||||
Texas Instruments LM5022MM/NOPB | Frequency Control, Soft Start | Step-Up, Step-Up/Step-Down | Transistor Driver | 1 | 125 ¯C | -40 °C | 200 kHz | 990 kHz | 1 | Surface Mount | 10-VSSOP | 95 % | Boost, SEPIC | Positive | 10-MSOP, 10-TFSOP | ||||||||||||||||||
Texas Instruments LM5022LEDEVAL | Board(s) | LM5022 | 14 V | 10 VDC | Non-Isolated | 1 | 40 V | Dimmable | 1 A | ||||||||||||||||||||||||
Texas Instruments LM5022MM | Frequency Control, Soft Start | Step-Up, Step-Up/Step-Down | Transistor Driver | 1 | 125 ¯C | -40 °C | 200 kHz | 990 kHz | 1 | Surface Mount | 10-VSSOP | 95 % | Boost, SEPIC | Positive | 10-MSOP, 10-TFSOP | ||||||||||||||||||
Texas Instruments LM5022QDGSTQ1 | Frequency Control, Soft Start | Step-Up, Step-Up/Step-Down | Transistor Driver | 1 | 125 ¯C | -40 °C | 200 kHz | 2.24 MHz | 1 | Surface Mount | 10-VSSOP | 95 % | Boost, SEPIC | Positive | 10-MSOP, 10-TFSOP | AEC-Q100 | Automotive | ||||||||||||||||
Texas Instruments LM5022BSTBLDT/NOPB | Bare (Unpopulated) | Board(s) | |||||||||||||||||||||||||||||||
Texas Instruments LM5022QDGSRQ1 | Frequency Control, Soft Start | Step-Up, Step-Up/Step-Down | Transistor Driver | 1 | 125 ¯C | -40 °C | 200 kHz | 2.24 MHz | 1 | Surface Mount | 10-VSSOP | 95 % | Boost, SEPIC | Positive | 10-MSOP, 10-TFSOP | AEC-Q100 | Automotive | ||||||||||||||||
Texas Instruments LM5022MMX/NOPB | Frequency Control, Soft Start | Step-Up, Step-Up/Step-Down | Transistor Driver | 1 | 125 ¯C | -40 °C | 200 kHz | 990 kHz | 1 | Surface Mount | 10-VSSOP | 95 % | Boost, SEPIC | Positive | 10-MSOP, 10-TFSOP | ||||||||||||||||||
Texas Instruments LM5022EVAL | Fully Populated | Board(s) | LM5022 | DC/DC, Step Up | 16 V | 9 VDC | Non-Isolated | 1 | 500 mA | Boost | 40 V | 500 kHz |
Key Features
• Internal 60-V start-up regulator1-A Peak MOSFET gate driverVINRange: 6 V to 60 V (operates down to 3 V after start-up)Duty cycle limit of 90%Programmable UVLO with hysteresisCycle-by-cycle current limitExternal synchronizable (AC-coupled)Single resistor oscillator frequency setSlope compensationAdjustable soft start10-Pin VSSOP packageInternal 60-V start-up regulator1-A Peak MOSFET gate driverVINRange: 6 V to 60 V (operates down to 3 V after start-up)Duty cycle limit of 90%Programmable UVLO with hysteresisCycle-by-cycle current limitExternal synchronizable (AC-coupled)Single resistor oscillator frequency setSlope compensationAdjustable soft start10-Pin VSSOP package
Description
AI
The LM5022 device is a high-voltage, low-side, N-channel MOSFET controller ideal for use in boost and SEPIC regulators. It contains all of the features required to implement single-ended primary topologies. Output voltage regulation is based on current-mode control, which eases the design of loop compensation while providing inherent input voltage feedforward. The LM5022 includes a start-up regulator that operates over a wide input range of 6 V to 60 V. The PWM controller is designed for high-speed capability including an oscillator frequency range up to 2.2 MHz and total propagation delays less than 100 ns. Additional features include an error amplifier, precision reference, line undervoltage lockout, cycle-by-cycle current limit, slope compensation, soft start, external synchronization capability, and thermal shutdown. The LM5022 is available in the 10-pin VSSOP package.
The LM5022 device is a high-voltage, low-side, N-channel MOSFET controller ideal for use in boost and SEPIC regulators. It contains all of the features required to implement single-ended primary topologies. Output voltage regulation is based on current-mode control, which eases the design of loop compensation while providing inherent input voltage feedforward. The LM5022 includes a start-up regulator that operates over a wide input range of 6 V to 60 V. The PWM controller is designed for high-speed capability including an oscillator frequency range up to 2.2 MHz and total propagation delays less than 100 ns. Additional features include an error amplifier, precision reference, line undervoltage lockout, cycle-by-cycle current limit, slope compensation, soft start, external synchronization capability, and thermal shutdown. The LM5022 is available in the 10-pin VSSOP package.