TPS54061-Q1 Series
Automotive Catalog, 4.7V -60-V, 200-mA Synchronous Step-Down DC-DC Converter
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
Automotive Catalog, 4.7V -60-V, 200-mA Synchronous Step-Down DC-DC Converter
| Part | Output Configuration | Output Type | Qualification | Voltage - Input (Max) [Max] | Number of Outputs | Topology | Frequency - Switching [Max] | Frequency - Switching [Min] | Operating Temperature [Max] | Operating Temperature [Min] | Voltage - Input (Min) [Min] | Synchronous Rectifier | Voltage - Output (Max) [Max] | Current - Output | Function | Mounting Type | Supplier Device Package | Voltage - Output (Min/Fixed) | Package / Case | Grade |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS54061QDRBRQ1 | Positive | Adjustable | AEC-Q100 | 60 V | 1 | Buck | 1.1 MHz | 50 kHz | 150 C | -40 °C | 4.7 V | 58 V | 200 mA | Step-Down | Surface Mount | 8-SON (3x3) | 0.8 V | 8-VDFN Exposed Pad | Automotive | |
Texas Instruments TPS54061QDRBTQ1 | Positive | Adjustable | AEC-Q100 | 60 V | 1 | Buck | 1.1 MHz | 50 kHz | 150 C | -40 °C | 4.7 V | 58 V | 200 mA | Step-Down | Surface Mount | 8-SON (3x3) | 0.8 V | 8-VDFN Exposed Pad | Automotive |
Key Features
• Qualified for Automotive ApplicationsAEC-Q100 Qualified With the Following Results:Device Temperature Grade 1: –40°C to 125°CAmbient Operating Temperature RangeDevice HBM ESD Classification Level H2Device CDM ESD Classification Level C3BIntegrated High-Side and Low-Side MOSFETsDiode Emulation for Light-Load EfficiencyPeak-Current Mode Control90-µA Operating Quiescent Current1.4-µA Shutdown Supply Current50-kHz to 1.1-MHz Adjustable SwitchingFrequencySynchronizes to External Clock0.8 V ±1% Voltage ReferenceStable With Ceramic Output Capacitors or Low-Cost Aluminum ElectrolyticCycle-by-Cycle Current Limit, Thermal, OVP, andFrequency Foldback Protection3-mm × 3-mm, 8-Pin SON Package With ThermalPad–40°C to 150°C Operating Junction TemperatureQualified for Automotive ApplicationsAEC-Q100 Qualified With the Following Results:Device Temperature Grade 1: –40°C to 125°CAmbient Operating Temperature RangeDevice HBM ESD Classification Level H2Device CDM ESD Classification Level C3BIntegrated High-Side and Low-Side MOSFETsDiode Emulation for Light-Load EfficiencyPeak-Current Mode Control90-µA Operating Quiescent Current1.4-µA Shutdown Supply Current50-kHz to 1.1-MHz Adjustable SwitchingFrequencySynchronizes to External Clock0.8 V ±1% Voltage ReferenceStable With Ceramic Output Capacitors or Low-Cost Aluminum ElectrolyticCycle-by-Cycle Current Limit, Thermal, OVP, andFrequency Foldback Protection3-mm × 3-mm, 8-Pin SON Package With ThermalPad–40°C to 150°C Operating Junction Temperature
Description
AI
The TPS54061-Q1 device is a 60-V, 200-mA, synchronous step-down DC-DC converter with integrated high-side and low-side MOSFETs. Current-mode control provides simple external compensation and flexible component selection. The non-switching supply current is 90 µA. Using the enable pin reduces the shutdown supply current to 1.4 µA.
To increase light-load efficiency, the low-side MOSFET emulates a diode when the inductor current reaches zero.
The internal undervoltage lockout setting is 4.5 V, but using two resistors on the enable pin can increase the setting. The internal slow-start time controls the output-voltage start-up ramp.
The adjustable switching-frequency range allows optimization of efficiency and external component size. Frequency foldback and thermal shutdown protect the part during an overload condition.
The TPS54061-Q1 enables small designs by integrating the MOSFETs and boot recharge diode, and by minimizing the IC footprint with a small 3-mm × 3-mm thermally-enhanced SON package.
The TPS54061-Q1 is supported in the WEBENCH™ Designer atwww.ti.com.
The TPS54061-Q1 device is a 60-V, 200-mA, synchronous step-down DC-DC converter with integrated high-side and low-side MOSFETs. Current-mode control provides simple external compensation and flexible component selection. The non-switching supply current is 90 µA. Using the enable pin reduces the shutdown supply current to 1.4 µA.
To increase light-load efficiency, the low-side MOSFET emulates a diode when the inductor current reaches zero.
The internal undervoltage lockout setting is 4.5 V, but using two resistors on the enable pin can increase the setting. The internal slow-start time controls the output-voltage start-up ramp.
The adjustable switching-frequency range allows optimization of efficiency and external component size. Frequency foldback and thermal shutdown protect the part during an overload condition.
The TPS54061-Q1 enables small designs by integrating the MOSFETs and boot recharge diode, and by minimizing the IC footprint with a small 3-mm × 3-mm thermally-enhanced SON package.
The TPS54061-Q1 is supported in the WEBENCH™ Designer atwww.ti.com.