TCA9534 Series
8-bit 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, & config registers
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
8-bit 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, & config registers
| Part | Operating Temperature [Min] | Operating Temperature [Max] | Voltage - Supply [Max] | Voltage - Supply [Min] | Clock Frequency | Mounting Type | Interface | Output Type | Supplier Device Package | Interrupt Output | Package / Case [x] | Package / Case | Package / Case [x] | Number of I/O | Current - Output Source/Sink |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TCA9534APWR | -40 °C | 85 °C | 5.5 V | 1.65 V | 400 kHz | Surface Mount | I2C | Push-Pull | 16-TSSOP | 0.173 " | 16-TSSOP | 4.4 mm | 8 | ||
Texas Instruments TCA9534ADWR | -40 °C | 85 °C | 5.5 V | 1.65 V | 400 kHz | Surface Mount | I2C | Push-Pull | 16-SOIC | 16-SOIC | 8 | ||||
Texas Instruments TCA9534DWT | -40 °C | 85 °C | 5.5 V | 1.65 V | 400 kHz | Surface Mount | I2C | Push-Pull | 16-SOIC | 16-SOIC | 8 | ||||
Texas Instruments TCA9534ADWT | -40 °C | 85 °C | 5.5 V | 1.65 V | 400 kHz | Surface Mount | I2C | Push-Pull | 16-SOIC | 16-SOIC | 8 | ||||
Texas Instruments TCA9534PWR | -40 °C | 85 °C | 5.5 V | 1.65 V | 400 kHz | Surface Mount | I2C | Push-Pull | 16-TSSOP | 0.173 " | 16-TSSOP | 4.4 mm | 8 | 10 mA, 25 mA |
Key Features
• Low Standby Current ConsumptionI2C to Parallel Port ExpanderOpen-Drain Active-Low Interrupt OutputOperating Power-Supply Voltage Range of 1.65 V to 5.5 V5-V Tolerant I/O Ports400-kHz Fast I2C BusThree Hardware Address Pins Allow up to Eight Devices on the I2C/SMBusInput and Output Configuration RegisterPolarity Inversion RegisterInternal Power-On ResetPower-Up With All Channels Configured as InputsNo Glitch on Power UpNoise Filter on SCL/SDA InputsLatched Outputs With High-Current Drive Maximum Capability for Directly Driving LEDsLatch-Up Performance Exceeds 100 mA Per JESD 78, Class IIESD Protection Exceeds JESD 222000-V Human-Body Model (A114-A)1000-V Charged-Device Model (C101)Low Standby Current ConsumptionI2C to Parallel Port ExpanderOpen-Drain Active-Low Interrupt OutputOperating Power-Supply Voltage Range of 1.65 V to 5.5 V5-V Tolerant I/O Ports400-kHz Fast I2C BusThree Hardware Address Pins Allow up to Eight Devices on the I2C/SMBusInput and Output Configuration RegisterPolarity Inversion RegisterInternal Power-On ResetPower-Up With All Channels Configured as InputsNo Glitch on Power UpNoise Filter on SCL/SDA InputsLatched Outputs With High-Current Drive Maximum Capability for Directly Driving LEDsLatch-Up Performance Exceeds 100 mA Per JESD 78, Class IIESD Protection Exceeds JESD 222000-V Human-Body Model (A114-A)1000-V Charged-Device Model (C101)
Description
AI
The TCA9534A is a 16-pin device that provides 8 bits of general purpose parallel input and output (I/O) expansion for the two-line bidirectional I2C bus (or SMBus) protocol. The device can operate with a power supply voltage ranging from 1.65 V to 5.5 V, which allows for use with a wide range of devices. The device supports both 100-kHz (Standard-mode) and 400-kHz (Fast-mode) clock frequencies. I/O expanders such as the TCA9534A provide a simple solution when additional I/Os are needed for switches, sensors, push-buttons, LEDs, fans, and other similar devices.
The features of the TCA9534A include an interrupt that is generated on theINTpin. This allows the master to know when an input port changes state. The A0, A1, and A2 hardware selectable address pins allow up to eight TCA9534A devices on the same I2C bus. The device can also be reset to its default sate by cycling the power supply and causing a power-on reset.
The TCA9534A is a 16-pin device that provides 8 bits of general purpose parallel input and output (I/O) expansion for the two-line bidirectional I2C bus (or SMBus) protocol. The device can operate with a power supply voltage ranging from 1.65 V to 5.5 V, which allows for use with a wide range of devices. The device supports both 100-kHz (Standard-mode) and 400-kHz (Fast-mode) clock frequencies. I/O expanders such as the TCA9534A provide a simple solution when additional I/Os are needed for switches, sensors, push-buttons, LEDs, fans, and other similar devices.
The features of the TCA9534A include an interrupt that is generated on theINTpin. This allows the master to know when an input port changes state. The A0, A1, and A2 hardware selectable address pins allow up to eight TCA9534A devices on the same I2C bus. The device can also be reset to its default sate by cycling the power supply and causing a power-on reset.