Zenode.ai Logo

TPS53632 Series

Half-bridge, D-CAP+ controller for 48-V GaN DC/DC converter

Manufacturer: Texas Instruments

Catalog(4 parts)

PartOutput TypeOperating TemperatureOperating TemperatureSupplier Device PackageClock SyncVoltage - Supply (Vcc/Vdd)Voltage - Supply (Vcc/Vdd)Package / CaseTopologyOutput PhasesMounting TypeControl FeaturesFrequency - SwitchingFrequency - SwitchingNumber of OutputsSerial InterfacesFunctionSynchronous RectifierOutput ConfigurationNumber of OutputsFrequency - Switching
Texas Instruments
TPS53632RSMR
Buck Regulator Positive Output Step-Down I2C DC-DC Controller IC 32-VQFN (4x4)
PWM Signal
-10 °C
105 °C
32-VQFN (4x4)
24 V
2.5 V
32-VFQFN Exposed Pad
Buck
3 ul
Surface Mount
Enable, Frequency Control, Power Good, Ramp
1000000 Hz
300000 Hz
3 ul
I2C
Step-Down
Positive
Texas Instruments
TPS53632RSMT
Buck Regulator Positive Output Step-Down I2C DC-DC Controller IC 32-VQFN (4x4)
PWM Signal
-10 °C
105 °C
32-VQFN (4x4)
24 V
2.5 V
32-VFQFN Exposed Pad
Buck
3 ul
Surface Mount
Enable, Frequency Control, Power Good, Ramp
1000000 Hz
300000 Hz
3 ul
I2C
Step-Down
Positive
Texas Instruments
TPS53632GRSMT
Half-Bridge Regulator Positive Output Step-Up/Step-Down I2C DC-DC Controller IC 32-VQFN (4x4)
PWM Signal
-10 °C
105 °C
32-VQFN (4x4)
28 V
3.0999999046325684 V
32-VFQFN Exposed Pad
Half-Bridge
Surface Mount
Enable, Frequency Control, Power Good, Pulse Skipping, Ramp, Slew Control
1000000 Hz
100000 Hz
I2C
Step-Up/Step-Down
Positive
2 ul
Texas Instruments
TPS53632GRSMR
Buck Regulator Positive Output Step-Down I2C DC-DC Controller IC 32-VQFN (4x4)
PWM Signal
-10 °C
105 °C
32-VQFN (4x4)
5.5 V
3.0999999046325684 V
32-VFQFN Exposed Pad
Buck
Surface Mount
Current Limit, Enable, On Time Control, Phase Control, Power Good, Slew Control
I2C
Step-Down
Positive
2 ul
1000000 Hz

Key Features

Valley Current Mode with Constant ON Time ControlLossless Current Sensing SchemeI2C Interface for VID Control and TelemetryProgrammable I2C Addresses up to Eight DevicesSwitching Frequency up to 1 MHzDigital Current Monitor7-Bit, DAC Output Range: 0.50-V to 1.52-V with 10-mV StepAccurate, Adjustable Voltage Positioning or Zero Slope Load-LineSelectable, 8-Level Current LimitAdjustable Output Slew Rate ControlDefault Boot Voltage: 1.00 VSmall, 4-mm × 4-mm, 32-Pin, VQFN, PowerPAD PackageValley Current Mode with Constant ON Time ControlLossless Current Sensing SchemeI2C Interface for VID Control and TelemetryProgrammable I2C Addresses up to Eight DevicesSwitching Frequency up to 1 MHzDigital Current Monitor7-Bit, DAC Output Range: 0.50-V to 1.52-V with 10-mV StepAccurate, Adjustable Voltage Positioning or Zero Slope Load-LineSelectable, 8-Level Current LimitAdjustable Output Slew Rate ControlDefault Boot Voltage: 1.00 VSmall, 4-mm × 4-mm, 32-Pin, VQFN, PowerPAD Package

Description

AI
The TPS53632G device is a half-bridge PWM controller with D-CAP+ architecture that provides fast transient response, lowest outputcapacitance and high efficiency in single stage conversion directly from 48-V bus. The TPS53632G device supports the standard I2C Rev 3.0 interface for dynamic controlof the output voltage and current monitor telemetry. Paired with TI GaN power stages and drivers,the TPS53632G can switch up to 1 MHz to minimize magnetic component size and reduce overall boardspace. The LMG5200 GaN power stage is designed specifically for this controller to achieve highfrequency and efficiency as high as 92% with 48-V to 1-V conversion. Other features include adjustable control of output slew rate and voltage positioning. Inaddition, the TPS53632G device can be used along with other TI discrete power MOSFETs and driversfor silicon-based half bridge solutions. The TPS53632G device is packaged in a space saving,thermally enhanced, 32-pin VQFN package and is rated to operate at a range between –10°C and105°C. The TPS53632G device is a half-bridge PWM controller with D-CAP+ architecture that provides fast transient response, lowest outputcapacitance and high efficiency in single stage conversion directly from 48-V bus. The TPS53632G device supports the standard I2C Rev 3.0 interface for dynamic controlof the output voltage and current monitor telemetry. Paired with TI GaN power stages and drivers,the TPS53632G can switch up to 1 MHz to minimize magnetic component size and reduce overall boardspace. The LMG5200 GaN power stage is designed specifically for this controller to achieve highfrequency and efficiency as high as 92% with 48-V to 1-V conversion. Other features include adjustable control of output slew rate and voltage positioning. Inaddition, the TPS53632G device can be used along with other TI discrete power MOSFETs and driversfor silicon-based half bridge solutions. The TPS53632G device is packaged in a space saving,thermally enhanced, 32-pin VQFN package and is rated to operate at a range between –10°C and105°C.