TLV2211 Series
Single, 10-V, 65-kHz operational amplifier with high output current (10 mA)
Manufacturer: Texas Instruments
Catalog(4 parts)
| Part | Output Type | Current - Supply▲▼ | Package / Case | Current - Input Bias▲▼ | Current - Output / Channel▲▼ | Slew Rate▲▼ | Supplier Device Package | Voltage - Supply Span (Max)▲▼ | Voltage - Input Offset▲▼ | Voltage - Supply Span (Min)▲▼ | Amplifier Type | Number of Circuits▲▼ | Mounting Type | Operating Temperature▲▼ | Operating Temperature▲▼ | Gain Bandwidth Product▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Rail-to-Rail | 0.000012999999853491316 A | SC-74A, SOT-753 | 9.999999960041972e-13 A | 0.05000000074505806 A | 25000 V/s | SOT-23-5 | 10 V | 0.00044999999227002263 V | 2.700000047683716 V | General Purpose | 1 ul | Surface Mount | -40 °C | 85 °C | 65000 Hz | |
Rail-to-Rail | 0.000012999999853491316 A | SC-74A, SOT-753 | 9.999999960041972e-13 A | 0.05000000074505806 A | 25000 V/s | SOT-23-5 | 10 V | 0.00044999999227002263 V | 2.700000047683716 V | General Purpose | 1 ul | Surface Mount | 0 °C | 70 °C | 65000 Hz | |
Rail-to-Rail | 0.000012999999853491316 A | SC-74A, SOT-753 | 9.999999960041972e-13 A | 0.05000000074505806 A | 25000 V/s | SOT-23-5 | 10 V | 0.00044999999227002263 V | 2.700000047683716 V | General Purpose | 1 ul | Surface Mount | -40 °C | 85 °C | 65000 Hz | |
Rail-to-Rail | 0.000012999999853491316 A | SC-74A, SOT-753 | 9.999999960041972e-13 A | 0.05000000074505806 A | 25000 V/s | SOT-23-5 | 10 V | 0.00044999999227002263 V | 2.700000047683716 V | General Purpose | 1 ul | Surface Mount | -40 °C | 85 °C | 65000 Hz |
Key Features
• Output Swing Includes Both Supply RailsLow Noise...21 nV/HzTyp at f = 1 kHzLow Input Bias Current...1 pA TypVery Low Power...11 µA Per Channel TypCommon-Mode Input Voltage Range Includes Negative RailWide Supply Voltage Range 2.7 V to 10 VAvailable in the SOT-23 PackageMacromodel IncludedAdvanced LinCMOS is a trademark of Texas Instruments.Output Swing Includes Both Supply RailsLow Noise...21 nV/HzTyp at f = 1 kHzLow Input Bias Current...1 pA TypVery Low Power...11 µA Per Channel TypCommon-Mode Input Voltage Range Includes Negative RailWide Supply Voltage Range 2.7 V to 10 VAvailable in the SOT-23 PackageMacromodel IncludedAdvanced LinCMOS is a trademark of Texas Instruments.
Description
AI
The TLV2211 is a single low-voltage operational amplifier available in the SOT-23 package. It consumes only 11 µA (typ) of supply current and is ideal for battery-power applications. The TLV2211 has a 3-V noise level of 22 nV/Hzat 1kHz; 5 times lower than competitive SOT-23 micropower solutions. The device exhibits rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLV2211 is fully characterized at 3 V and 5 V and is optimized for low-voltage applications.
The TLV2211, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels combined with 3-V operation, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single or split supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs).
With a total area of 5.6mm2, the SOT-23 package only requires one-third the board space of the standard 8-pin SOIC package. This ultra-small package allows designers to place single amplifiers very close to the signal source, minimizing noise pick-up from long PCB traces. TI has also taken special care to provide a pinout that is optimized for board layout. Both inputs are separated by GND to prevent coupling or leakage paths. The OUT and IN- terminals are on the same end of the board to provide negative feedback. Finally, gain setting resistors and decoupling capacitor are easily placed around the package.
The TLV2211 is a single low-voltage operational amplifier available in the SOT-23 package. It consumes only 11 µA (typ) of supply current and is ideal for battery-power applications. The TLV2211 has a 3-V noise level of 22 nV/Hzat 1kHz; 5 times lower than competitive SOT-23 micropower solutions. The device exhibits rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLV2211 is fully characterized at 3 V and 5 V and is optimized for low-voltage applications.
The TLV2211, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels combined with 3-V operation, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single or split supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs).
With a total area of 5.6mm2, the SOT-23 package only requires one-third the board space of the standard 8-pin SOIC package. This ultra-small package allows designers to place single amplifiers very close to the signal source, minimizing noise pick-up from long PCB traces. TI has also taken special care to provide a pinout that is optimized for board layout. Both inputs are separated by GND to prevent coupling or leakage paths. The OUT and IN- terminals are on the same end of the board to provide negative feedback. Finally, gain setting resistors and decoupling capacitor are easily placed around the package.