74F574 Series
Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs
Manufacturer: Texas Instruments
Catalog(1 parts)
| Part | Current - Output High, Low▲▼ | Function | Number of Bits per Element▲▼ | Output Type | Mounting Type | Type | Trigger Type | Supplier Device Package | Voltage - Supply▲▼ | Voltage - Supply▲▼ | Clock Frequency▲▼ | Operating Temperature▲▼ | Operating Temperature▲▼ | Max Propagation Delay @ V, Max CL▲▼ | Number of Elements▲▼ | Package / Case | Package / Case▲▼ | Package / Case▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0.003000000026077032 A, 0.024000000208616257 A | Standard | 8 ul | Tri-State, Non-Inverted | Through Hole | D-Type | Positive Edge | 20-PDIP | 5.5 V | 4.5 V | 100000000 Hz | 70 °C | 0 °C | 8.499999815114734e-9 s | 1 ul | 20-DIP | 0.007619999814778566 m | 0.007619999814778566 m |
Key Features
• Eight D-Type Flip-Flops in a Single Package3-State Bus-Driving True OutputsFull Parallel Access for LoadingBuffered Control InputsPackage Options Include Plastic Small-Outline Packages and Standard Plastic 300-mil DIPsEight D-Type Flip-Flops in a Single Package3-State Bus-Driving True OutputsFull Parallel Access for LoadingBuffered Control InputsPackage Options Include Plastic Small-Outline Packages and Standard Plastic 300-mil DIPs
Description
AI
This 8-bit flip-flop features 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
The eight flip-flops of the SN74F574 are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the Q outputs will be set to the logic levels that were set up at the data (D) inputs.
A buffered output enableinput can be used to place the eight outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pullup components.
The output enabledoes not affect the internal operations of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
The SN74F574 is characterized for operation from 0°C to 70°C.
This 8-bit flip-flop features 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
The eight flip-flops of the SN74F574 are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the Q outputs will be set to the logic levels that were set up at the data (D) inputs.
A buffered output enableinput can be used to place the eight outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pullup components.
The output enabledoes not affect the internal operations of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
The SN74F574 is characterized for operation from 0°C to 70°C.