Catalog(3 parts)
| Part | Interface | Supplier Device Package | Mounting Type | Voltage - Supply▲▼ | Applications | Package / Case | Utilized IC / Part | Type | Secondary Attributes | Supplied Contents |
|---|---|---|---|---|---|---|---|---|---|---|
USB | 12-X2QFN (1.6x1.6) | Surface Mount | 3.299999952316284 V | Signal Processing | 12-XFQFN | |||||
USB | 12-X2QFN (1.6x1.6) | Surface Mount | 3.299999952316284 V | Signal Processing | 12-XFQFN | |||||
TUSB211 | Interface | On-Board LEDs | Board(s) |
Key Features
• Compatible with USB 2.0, OTG 2.0 and BC 1.2Support for LS, FS, HS signalingActive Power Consumption of 55 mW (Typical) with 3.3-V Single SupplySelectable Signal Gain Via External Pulldown ResistorDoes Not Break DP, DM TraceScalable Solution – Daisy Chain Device for High Loss ApplicationsCompact 1.6 mm x 1.6 mm QFN PackageCompatible with USB 2.0, OTG 2.0 and BC 1.2Support for LS, FS, HS signalingActive Power Consumption of 55 mW (Typical) with 3.3-V Single SupplySelectable Signal Gain Via External Pulldown ResistorDoes Not Break DP, DM TraceScalable Solution – Daisy Chain Device for High Loss ApplicationsCompact 1.6 mm x 1.6 mm QFN Package
Description
AI
The TUSB211 is a USB High-Speed (HS) signal conditioner, designed to compensate for ISI signal loss in a transmission channel.
The device has a patent-pending design which is agnostic to USB Low Speed (LS) and Full Speed (FS) signals. LS and FS signal characteristics are unaffected by the TUSB211. HS signals are compensated.
Programmable signal gain permits fine tuning device performance to optimize High Speed signals at the connector. This helps to pass USB High Speed electrical compliance tests.
The footprint of TUSB211 does not break the continuity of the DP/DM signal path. This permits risk free system design of a complete USB channel.
In addition, TUSB211 is compatible with the USB On-The-Go (OTG) and Battery Charging (BC) protocols
The TUSB211 is a USB High-Speed (HS) signal conditioner, designed to compensate for ISI signal loss in a transmission channel.
The device has a patent-pending design which is agnostic to USB Low Speed (LS) and Full Speed (FS) signals. LS and FS signal characteristics are unaffected by the TUSB211. HS signals are compensated.
Programmable signal gain permits fine tuning device performance to optimize High Speed signals at the connector. This helps to pass USB High Speed electrical compliance tests.
The footprint of TUSB211 does not break the continuity of the DP/DM signal path. This permits risk free system design of a complete USB channel.
In addition, TUSB211 is compatible with the USB On-The-Go (OTG) and Battery Charging (BC) protocols