BQ76PL536A-Q1 Series
3 to 6 series cell lithium-ion battery monitor and secondary protection for automotive battery packs
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
3 to 6 series cell lithium-ion battery monitor and secondary protection for automotive battery packs
| Part | Operating Temperature [Max] | Operating Temperature [Min] | Qualification | Fault Protection | Number of Cells [Min] | Number of Cells [Max] | Supplier Device Package | Interface | Function | Package / Case | Grade | Mounting Type | Battery Chemistry |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments BQ76PL536ATPAPTQ1 | 105 °C | -40 °C | AEC-Q100 | Over Temperature, Over/Under Voltage | 3 | 6 | 64-HTQFP (10x10) | SPI | Multi-Function Controller | 64-PowerTQFP | Automotive | Surface Mount | Lithium Ion |
Texas Instruments BQ76PL536ATPAPRQ1 | 105 °C | -40 °C | AEC-Q100 | Over Temperature, Over/Under Voltage | 3 | 6 | 64-HTQFP (10x10) | SPI | Multi-Function Controller | 64-PowerTQFP | Automotive | Surface Mount | Lithium Ion |
Key Features
• Qualified for Automotive ApplicationsAEC-Q100 Qualified With the Following Results:Device Temperature Grade 2: –40°C to +105°C Ambient Operating Temperature RangeDevice HBM Classification Level 2Device CDM Classification Level C4B3-to-6 Series Cell Support, All ChemistriesHot-PluggableHigh-Speed Serial Peripheral Interface (SPI) for Data CommunicationsStackable Vertical InterfaceIsolation Components Not Required Between DevicesHigh-Accuracy Analog-to-Digital Converter (ADC):±1 mV Typical Accuracy14-Bit Resolution, 6-µs Conversion TimeNine ADC InputsDedicated Pins for Synchronizing MeasurementsConfiguration Data Stored in Error Check/Correct (ECC)-One-Time-Programmable (OTP) RegistersBuilt-In Comparators (Secondary Protector) for:Overvoltage and Undervoltage ProtectionOvertemperature ProtectionProgrammable Thresholds and Delay TimesDedicated Fault SignalsCell Balancing Control Outputs With Safety TimeoutBalance Current Set by External ComponentsSupply Voltage Range from 7.2 V to 27 V Continuous and 36-V PeakLow Power:Typical 12-µA Sleep, 45-µA IdleIntegrated Precision 5-V, 3-mA LDOQualified for Automotive ApplicationsAEC-Q100 Qualified With the Following Results:Device Temperature Grade 2: –40°C to +105°C Ambient Operating Temperature RangeDevice HBM Classification Level 2Device CDM Classification Level C4B3-to-6 Series Cell Support, All ChemistriesHot-PluggableHigh-Speed Serial Peripheral Interface (SPI) for Data CommunicationsStackable Vertical InterfaceIsolation Components Not Required Between DevicesHigh-Accuracy Analog-to-Digital Converter (ADC):±1 mV Typical Accuracy14-Bit Resolution, 6-µs Conversion TimeNine ADC InputsDedicated Pins for Synchronizing MeasurementsConfiguration Data Stored in Error Check/Correct (ECC)-One-Time-Programmable (OTP) RegistersBuilt-In Comparators (Secondary Protector) for:Overvoltage and Undervoltage ProtectionOvertemperature ProtectionProgrammable Thresholds and Delay TimesDedicated Fault SignalsCell Balancing Control Outputs With Safety TimeoutBalance Current Set by External ComponentsSupply Voltage Range from 7.2 V to 27 V Continuous and 36-V PeakLow Power:Typical 12-µA Sleep, 45-µA IdleIntegrated Precision 5-V, 3-mA LDO
Description
AI
The bq76PL536A-Q1 device is a stackable battery monitor and protector for three-to-six lithium-ion cells in series. The bq76PL536A-Q1 integrates an analog front end (AFE) along with a precision analog-to-digital converter (ADC), used to precisely measure battery cell voltages. A separate ADC is used to measure temperature.
In addition to temperature measurement, overvoltage and undervoltage are monitored per channel for protection. Non-volatile memory stores the user-programmable protection thresholds and delay times. A FAULT output signals whenever one of these thresholds is exceeded.
Cell stacks of 192 cells can be supported by stacked bq76PL536A-Q1 devices. A high-speed SPI interface connects all devices.
The bq76PL536A-Q1 device is a stackable battery monitor and protector for three-to-six lithium-ion cells in series. The bq76PL536A-Q1 integrates an analog front end (AFE) along with a precision analog-to-digital converter (ADC), used to precisely measure battery cell voltages. A separate ADC is used to measure temperature.
In addition to temperature measurement, overvoltage and undervoltage are monitored per channel for protection. Non-volatile memory stores the user-programmable protection thresholds and delay times. A FAULT output signals whenever one of these thresholds is exceeded.
Cell stacks of 192 cells can be supported by stacked bq76PL536A-Q1 devices. A high-speed SPI interface connects all devices.