UCC28600 Series
Automotive 8-pin current mode Flyback controller with green mode
Manufacturer: Texas Instruments
Catalog(4 parts)
| Part | Voltage - Supply (Vcc/Vdd)▲▼ | Voltage - Supply (Vcc/Vdd)▲▼ | Frequency - Switching▲▼ | Frequency - Switching▲▼ | Mounting Type | Duty Cycle▲▼ | Internal Switch(s)▲▼ | Package / Case▲▼ | Package / Case | Control Features | Supplier Device Package | Power (Watts)▲▼ | Fault Protection | Output Isolation | Operating Temperature▲▼ | Operating Temperature▲▼ | Topology | Regulator Topology | Utilized IC / Part | Main Purpose | Voltage - Input▲▼ | Voltage - Input▲▼ | Board Type | Supplied Contents | Outputs and Type | Outputs and Type▲▼ | Voltage - Output▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
8 V | 21 V | 130000 Hz | 40000 Hz | Surface Mount | 0.9900000095367432 ul | 0.003899999894201755 m | 8-SOIC | Soft Start | 8-SOIC | 200 W | Current Limiting, Over Temperature, Over Voltage | Isolated | 105 °C | -40 °C | Flyback | ||||||||||||
Flyback | UCC28600 | AC/DC, Primary Side | 85 Vrms | 265 Vrms | Fully Populated | Board(s) | Isolated | 1 ul | 18 V | ||||||||||||||||||
8 V | 21 V | 130000 Hz | 40000 Hz | Surface Mount | 0.9900000095367432 ul | 0.003899999894201755 m | 8-SOIC | Soft Start | 8-SOIC | 200 W | Current Limiting, Over Temperature, Over Voltage | Isolated | 105 °C | -40 °C | Flyback | ||||||||||||
8 V | 21 V | 130000 Hz | 40000 Hz | Surface Mount | 0.9900000095367432 ul | 0.003899999894201755 m | 8-SOIC | Soft Start | 8-SOIC | 200 W | Current Limiting, Over Temperature, Over Voltage | Isolated | 105 °C | -40 °C | Flyback |
Key Features
• Qualified for Automotive ApplicationsGreen-Mode Controller With Advanced Energy Saving FeaturesQuasi-Resonant Mode Operation for Reduced EMI andLow Switching Losses (Low Voltage Switching)Low Standby Current for System No-Load Power ConsumptionLow Startup Current: 25 µA MaximumProgrammable Overvoltage Protection, Line and LoadInternal Overtemperature ProtectionCurrent Limit ProtectionCycle-by-Cycle Power LimitPrimary-Side Overcurrent Hiccup Restart Mode1-A Sink TrueDrive™, -0.75-A Source Gate Drive OutputProgrammable Soft-StartGreen-Mode Status Pin (PFC Disable Function)APPLICATIONSBias Supplies for LCD-Monitors, LCD-TV, PDP-TV,and Set Top BoxesAC/DC Adapters and Offline Battery ChargersEnergy Efficient Power Supplies up to 200 WTrueDrive Is a trademark of Texas InstrumentsQualified for Automotive ApplicationsGreen-Mode Controller With Advanced Energy Saving FeaturesQuasi-Resonant Mode Operation for Reduced EMI andLow Switching Losses (Low Voltage Switching)Low Standby Current for System No-Load Power ConsumptionLow Startup Current: 25 µA MaximumProgrammable Overvoltage Protection, Line and LoadInternal Overtemperature ProtectionCurrent Limit ProtectionCycle-by-Cycle Power LimitPrimary-Side Overcurrent Hiccup Restart Mode1-A Sink TrueDrive™, -0.75-A Source Gate Drive OutputProgrammable Soft-StartGreen-Mode Status Pin (PFC Disable Function)APPLICATIONSBias Supplies for LCD-Monitors, LCD-TV, PDP-TV,and Set Top BoxesAC/DC Adapters and Offline Battery ChargersEnergy Efficient Power Supplies up to 200 WTrueDrive Is a trademark of Texas Instruments
Description
AI
The UCC28600-Q1 is a PWM controller with advanced energy features to meet stringent world-wide energy efficiency requirements.
UCC28600-Q1 integrates built-in advanced energy saving features with high level protection features to provide cost effective solutions for energy efficient power supplies. UCC28600-Q1 incorporates frequency fold back and green mode operation to reduce the operation frequency at light load and no load operations.
UCC28600-Q1 is offered in the 8-pin SOIC (D) package. Operating ambient temperature range is –40°C to 105°C.
The Design Calculator, (Texas Instruments Literature number SLVC104), located in the Tools and Software section of the UCC28600-Q1 product folder, provides a user-interactive iterative process for selecting recommended component values for an optimal design.
The UCC28600-Q1 is a PWM controller with advanced energy features to meet stringent world-wide energy efficiency requirements.
UCC28600-Q1 integrates built-in advanced energy saving features with high level protection features to provide cost effective solutions for energy efficient power supplies. UCC28600-Q1 incorporates frequency fold back and green mode operation to reduce the operation frequency at light load and no load operations.
UCC28600-Q1 is offered in the 8-pin SOIC (D) package. Operating ambient temperature range is –40°C to 105°C.
The Design Calculator, (Texas Instruments Literature number SLVC104), located in the Tools and Software section of the UCC28600-Q1 product folder, provides a user-interactive iterative process for selecting recommended component values for an optimal design.