MSP430F2274 Series
16 MHz MCU with 32KB Flash, 1KB SRAM, 10-bit ADC, 2 OpAmp, I2C/SPI/UART
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
16 MHz MCU with 32KB Flash, 1KB SRAM, 10-bit ADC, 2 OpAmp, I2C/SPI/UART
| Part | Connectivity | Mounting Type | Program Memory Size | Voltage - Supply (Vcc/Vdd) [Max] | Voltage - Supply (Vcc/Vdd) [Min] | Core Processor | RAM Size | Core Size | Data Converters [custom] | Data Converters | Data Converters [custom] | Package / Case | Number of I/O | Supplier Device Package | Oscillator Type | Speed | Program Memory Type | Operating Temperature [Max] | Operating Temperature [Min] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments MSP430F2274TDA | I2C, IrDA, LINbus, SCI, SPI, UART/USART | Surface Mount | 32 KB | 3.6 V | 1.8 V | MSP430 CPU16 | 1K x 8 | 16-Bit | 12 | A/D | 10 b | 38-TSSOP (0.240", 6.10mm Width) | 32 I/O | 38-TSSOP | Internal | 16 MHz | FLASH | 105 °C | -40 °C |
Texas Instruments MSP430F2274TDAR | I2C, IrDA, LINbus, SCI, SPI, UART/USART | Surface Mount | 32 KB | 3.6 V | 1.8 V | MSP430 CPU16 | 1K x 8 | 16-Bit | 12 | A/D | 10 b | 38-TSSOP (0.240", 6.10mm Width) | 32 I/O | 38-TSSOP | Internal | 16 MHz | FLASH | 105 °C | -40 °C |
Texas Instruments MSP430F2274MRHATEP | I2C, IrDA, LINbus, SCI, SPI, UART/USART | Surface Mount | 32 KB | 3.6 V | 1.8 V | MSP430 CPU16 | 1K x 8 | 16-Bit | 12 | A/D | 10 b | 40-VFQFN Exposed Pad | 32 I/O | 40-VQFN (6x6) | Internal | 16 MHz | FLASH | 125 °C | -55 C |
Texas Instruments MSP430F2274TRHAR | I2C, IrDA, LINbus, SCI, SPI, UART/USART | Surface Mount | 32 KB | 3.6 V | 1.8 V | MSP430 CPU16 | 1K x 8 | 16-Bit | 12 | A/D | 10 b | 40-VFQFN Exposed Pad | 32 I/O | 40-VQFN (6x6) | Internal | 16 MHz | FLASH | 105 °C | -40 °C |
Texas Instruments MSP430F2274MDATEP | I2C, IrDA, LINbus, SCI, SPI, UART/USART | Surface Mount | 32 KB | 3.6 V | 1.8 V | MSP430 CPU16 | 1K x 8 | 16-Bit | 12 | A/D | 10 b | 38-TSSOP (0.240", 6.10mm Width) | 32 I/O | 38-TSSOP | Internal | 16 MHz | FLASH | 125 °C | -55 C |
Texas Instruments MSP430F2274TRHAT | I2C, IrDA, LINbus, SCI, SPI, UART/USART | Surface Mount | 32 KB | 3.6 V | 1.8 V | MSP430 CPU16 | 1K x 8 | 16-Bit | 12 | A/D | 10 b | 40-VFQFN Exposed Pad | 32 I/O | 40-VQFN (6x6) | Internal | 16 MHz | FLASH | 105 °C | -40 °C |
Texas Instruments MSP430F2274IYFFT | I2C, IrDA, LINbus, SCI, SPI, UART/USART | Surface Mount | 32 KB | 3.6 V | 1.8 V | MSP430 CPU16 | 1K x 8 | 16-Bit | 12 | A/D | 10 b | 49-UFBGA, DSBGA | 32 I/O | 49-DSBGA (2.8x2.8) | Internal | 16 MHz | FLASH | 85 °C | -40 °C |
Texas Instruments MSP430F2274IDA | I2C, IrDA, LINbus, SCI, SPI, UART/USART | Surface Mount | 32 KB | 3.6 V | 1.8 V | MSP430 CPU16 | 1K x 8 | 16-Bit | 12 | A/D | 10 b | 38-TSSOP (0.240", 6.10mm Width) | 32 I/O | 38-TSSOP | Internal | 16 MHz | FLASH | 85 °C | -40 °C |
Texas Instruments MSP430F2274IRHAR | I2C, IrDA, LINbus, SCI, SPI, UART/USART | Surface Mount | 32 KB | 3.6 V | 1.8 V | MSP430 CPU16 | 1K x 8 | 16-Bit | 12 | A/D | 10 b | 40-VFQFN Exposed Pad | 32 I/O | 40-VQFN (6x6) | Internal | 16 MHz | FLASH | 85 °C | -40 °C |
Texas Instruments MSP430F2274IDAR | I2C, IrDA, LINbus, SCI, SPI, UART/USART | Surface Mount | 32 KB | 3.6 V | 1.8 V | MSP430 CPU16 | 1K x 8 | 16-Bit | 12 | A/D | 10 b | 38-TSSOP (0.240", 6.10mm Width) | 32 I/O | 38-TSSOP | Internal | 16 MHz | FLASH | 85 °C | -40 °C |
Texas Instruments MSP430F2274IYFFR | I2C, IrDA, LINbus, SCI, SPI, UART/USART | Surface Mount | 32 KB | 3.6 V | 1.8 V | MSP430 CPU16 | 1K x 8 | 16-Bit | 12 | A/D | 10 b | 49-UFBGA, DSBGA | 32 I/O | 49-DSBGA (2.8x2.8) | Internal | 16 MHz | FLASH | 85 °C | -40 °C |
Texas Instruments MSP430F2274IRHAT | I2C, IrDA, LINbus, SCI, SPI, UART/USART | Surface Mount | 32 KB | 3.6 V | 1.8 V | MSP430 CPU16 | 1K x 8 | 16-Bit | 12 | A/D | 10 b | 40-VFQFN Exposed Pad | 32 I/O | 40-VQFN (6x6) | Internal | 16 MHz | FLASH | 85 °C | -40 °C |
Key Features
• Low Supply Voltage Range: 1.8 V to 3.6 VUltra-Low Power ConsumptionActive Mode: 270 µA at 1 MHz, 2.2 VStandby Mode: 0.7 µAOff Mode (RAM Retention): 0.1 µAUltra-Fast Wake-Up From Standby Mode in Less Than 1 µs16-Bit RISC Architecture, 62.5-ns Instruction Cycle TimeBasic Clock Module ConfigurationsInternal Frequencies up to 16 MHz With Four Calibrated Frequencies to ±1%Internal Very-Low-Power Low-Frequency Oscillator32-kHz CrystalHigh-Frequency (HF) Crystal up to 16 MHzResonatorExternal Digital Clock SourceExternal Resistor16-Bit Timer_A With Three Capture/Compare Registers16-Bit Timer_B With Three Capture/Compare RegistersUniversal Serial Communication InterfaceEnhanced UART Supporting Auto-Baudrate Detection (LIN)IrDA Encoder and DecoderSynchronous SPII2C™10-Bit 200-ksps Analog-to-Digital (A/D) Converter With Internal Reference, Sample-and-Hold, Autoscan, and Data Transfer ControllerTwo Configurable Operational Amplifiers (MSP430F22x4 Only)Brownout DetectorSerial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security FuseBootstrap LoaderOn-Chip Emulation ModuleFamily Members Include:MSP430F2232: 8KB + 256B Flash Memory, 512B RAMMSP430F2252: 16KB + 256B Flash Memory, 512B RAMMSP430F2272: 32KB + 256B Flash Memory, 1KB RAMMSP430F2234: 8KB + 256B Flash Memory, 512B RAMMSP430F2254: 16KB + 256B Flash Memory, 512B RAMMSP430F2274: 32KB + 256B Flash Memory, 1KB RAMAvailable in a 38-Pin Thin Shrink Small-Outline Package (TSSOP) (DA), 40-Pin QFN Package (RHA), and 49-Pin Ball Grid Array Package (YFF)For Complete Module Descriptions, See the (SLAU144)All trademarks are the property of their respective owners.Low Supply Voltage Range: 1.8 V to 3.6 VUltra-Low Power ConsumptionActive Mode: 270 µA at 1 MHz, 2.2 VStandby Mode: 0.7 µAOff Mode (RAM Retention): 0.1 µAUltra-Fast Wake-Up From Standby Mode in Less Than 1 µs16-Bit RISC Architecture, 62.5-ns Instruction Cycle TimeBasic Clock Module ConfigurationsInternal Frequencies up to 16 MHz With Four Calibrated Frequencies to ±1%Internal Very-Low-Power Low-Frequency Oscillator32-kHz CrystalHigh-Frequency (HF) Crystal up to 16 MHzResonatorExternal Digital Clock SourceExternal Resistor16-Bit Timer_A With Three Capture/Compare Registers16-Bit Timer_B With Three Capture/Compare RegistersUniversal Serial Communication InterfaceEnhanced UART Supporting Auto-Baudrate Detection (LIN)IrDA Encoder and DecoderSynchronous SPII2C™10-Bit 200-ksps Analog-to-Digital (A/D) Converter With Internal Reference, Sample-and-Hold, Autoscan, and Data Transfer ControllerTwo Configurable Operational Amplifiers (MSP430F22x4 Only)Brownout DetectorSerial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security FuseBootstrap LoaderOn-Chip Emulation ModuleFamily Members Include:MSP430F2232: 8KB + 256B Flash Memory, 512B RAMMSP430F2252: 16KB + 256B Flash Memory, 512B RAMMSP430F2272: 32KB + 256B Flash Memory, 1KB RAMMSP430F2234: 8KB + 256B Flash Memory, 512B RAMMSP430F2254: 16KB + 256B Flash Memory, 512B RAMMSP430F2274: 32KB + 256B Flash Memory, 1KB RAMAvailable in a 38-Pin Thin Shrink Small-Outline Package (TSSOP) (DA), 40-Pin QFN Package (RHA), and 49-Pin Ball Grid Array Package (YFF)For Complete Module Descriptions, See the (SLAU144)All trademarks are the property of their respective owners.
Description
AI
The Texas Instruments MSP430 family of ultra-low-power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430F22x4/MSP430F22x2 series is an ultra-low-power mixed signal microcontroller with two built-in 16-bit timers, a universal serial communication interface, 10-bit A/D converter with integrated reference and data transfer controller (DTC), two general-purpose operational amplifiers in the MSP430F22x4 devices, and 32 I/O pins.
Typical applications include sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system. Stand-alone radio-frequency (RF) sensor front ends are another area of application.
The Texas Instruments MSP430 family of ultra-low-power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430F22x4/MSP430F22x2 series is an ultra-low-power mixed signal microcontroller with two built-in 16-bit timers, a universal serial communication interface, 10-bit A/D converter with integrated reference and data transfer controller (DTC), two general-purpose operational amplifiers in the MSP430F22x4 devices, and 32 I/O pins.
Typical applications include sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system. Stand-alone radio-frequency (RF) sensor front ends are another area of application.