LM6511 Series

180 ns 3V Comparator

Catalog

180 ns 3V Comparator

Part	Type	Current - Input Bias (Max)	CMRR (Typ)	PSRR (Typ)	Operating Temperature (Min)	Operating Temperature (Max)	Package Name	Package Length	Package Width	Output Type	Number of Elements	Current - Quiescent (Max)	Mounting Type	Supply Configuration	Voltage - Supply (Single) Minimum	Voltage - Supply (Single) Maximum	Voltage - Input Offset (Max)
Texas Instruments LM6511IMX	General Purpose Standard (General Purpose)	0.13 µA	72 dB	72 dB	-40 °C	85 °C	8-SOIC	0.154 in	3.9 mm	CMOS Open-Collector TTL	1	3.5 mA	Surface Mount	Dual Single	2.5 V	30 V	5 mV
Texas Instruments LM6511IM/NOPB	General Purpose Standard (General Purpose)	0.13 µA	72 dB	72 dB	-40 °C	85 °C	8-SOIC	0.154 in	3.9 mm	CMOS Open-Collector TTL	1	3.5 mA	Surface Mount	Dual Single	2.5 V	30 V	5 mV
Texas Instruments LM6511IM	General Purpose Standard (General Purpose)	0.13 µA	72 dB	72 dB	-40 °C	85 °C	8-SOIC	0.154 in	3.9 mm	CMOS Open-Collector TTL	1	3.5 mA	Surface Mount	Dual Single	2.5 V	30 V	5 mV
Texas Instruments LM6511IMX/NOPB	General Purpose Standard (General Purpose)	0.13 µA	72 dB	72 dB	-40 °C	85 °C	8-SOIC	0.154 in	3.9 mm	CMOS Open-Collector TTL	1	3.5 mA	Surface Mount	Dual Single	2.5 V	30 V	5 mV

Catalog

180 ns 3V Comparator

Description

The LM6511 voltage comparator is ideal for analog-digital interface circuitry when only a +3V or +3.3V supply is available. The open-collector output permits signal compatibility with a wide variety of digital families: +5V CMOS, +3V CMOS, TTL and so on. Supply voltage may range from 2.7V to 36V between supply voltage leads. The LM6511 operates with little power consumption (Pdiss< 9.45 mW at V+= +2.7V and V−= 0V). This voltage comparator offers many features that are available in traditional sub-microsecond comparators: output sync strobe, inputs and output may be isolated from system ground, and wire-ORing. Also, the LM6511 uses the industry-standard, single comparator pinout configuration. The LM6511 voltage comparator is ideal for analog-digital interface circuitry when only a +3V or +3.3V supply is available. The open-collector output permits signal compatibility with a wide variety of digital families: +5V CMOS, +3V CMOS, TTL and so on. Supply voltage may range from 2.7V to 36V between supply voltage leads. The LM6511 operates with little power consumption (Pdiss< 9.45 mW at V+= +2.7V and V−= 0V). This voltage comparator offers many features that are available in traditional sub-microsecond comparators: output sync strobe, inputs and output may be isolated from system ground, and wire-ORing. Also, the LM6511 uses the industry-standard, single comparator pinout configuration.