CDCE706 Series
300-MHz, LVCMOS, programmable 3-PLL clock synthesizer / multiplier / divider
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
300-MHz, LVCMOS, programmable 3-PLL clock synthesizer / multiplier / divider
| Part | Mounting Type | Voltage - Supply [Max] | Voltage - Supply [Min] | Number of Circuits | Operating Temperature [Min] | Operating Temperature [Max] | Package / Case | Package / Case | Package / Case | Frequency - Max [Max] | Ratio - Input:Output [custom] | Ratio - Input:Output [custom] | Supplier Device Package | Differential - Input:Output | PLL | Input | Output | Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments CDCE706PW | Surface Mount | 3.6 V | 3 V | 1 | -40 °C | 85 °C | 0.173 in | 4.4 mm | 20-TSSOP | 300 MHz | 6 | 1 | 20-TSSOP | Yes/No | Yes with Bypass | Crystal, LVCMOS | LVCMOS | |
Texas Instruments CDCE706PWR | Surface Mount | 3.6 V | 3 V | 1 | -40 °C | 85 °C | 0.173 in | 4.4 mm | 20-TSSOP | 300 MHz | 6 | 1 | 20-TSSOP | Yes/No | Yes with Bypass | Crystal, LVCMOS | LVCMOS | Spread Spectrum Clock Driver |
Texas Instruments CDCE706PWG4 | Surface Mount | 3.6 V | 3 V | 1 | -40 °C | 85 °C | 0.173 in | 4.4 mm | 20-TSSOP | 300 MHz | 6 | 1 | 20-TSSOP | Yes/No | Yes with Bypass | Crystal, LVCMOS | LVCMOS | Spread Spectrum Clock Driver |
Texas Instruments CDCE706PWRG4 | Surface Mount | 3.6 V | 3 V | 1 | -40 °C | 85 °C | 0.173 in | 4.4 mm | 20-TSSOP | 300 MHz | 6 | 1 | 20-TSSOP | Yes/No | Yes with Bypass | Crystal, LVCMOS | LVCMOS | Spread Spectrum Clock Driver |
Key Features
• High Performance 3:6 PLL Based Clock Synthesizer / Multiplier / DividerUser Programmable PLL FrequenciesEEPROM Programming Without the Need to Apply High Programming VoltageEasy In-Circuit Programming via SMBus Data InterfaceWide PLL Divider Ratio Allows 0-ppm Output Clock ErrorClock Inputs Accept a Crystal or a Single-Ended LVCMOS or a Differential Input SignalAccepts Crystal Frequencies from 8 MHz up to 54 MHzAccepts LVCMOS or Differential Input Frequencies up to 200 MHzTwo Programmable Control Inputs [S0/S1, A0/A1] for User Defined Control SignalsSix LVCMOS Outputs with Output Frequencies up to 300 MHzLVCMOS Outputs can be Programmed for Complementary SignalsFree Selectable Output Frequency via Programmable Output Switching Matrix [6x6] Including 7-Bit Post-Divider for Each OutputPLL Loop Filter Components IntegratedLow Period Jitter (Typ 60 ps)Features Spread Spectrum Clocking (SSC) for Lowering System EMIProgrammable Output Slew-Rate Control (SRC) for Lowering System EMI3.3-V Device Power SupplyIndustrial Temperature Range -40°C to 85°CDevelopment and Programming Kit for Easy PLL Design and Programming (TI Pro-Clock™)Packaged in 20-Pin TSSOPHigh Performance 3:6 PLL Based Clock Synthesizer / Multiplier / DividerUser Programmable PLL FrequenciesEEPROM Programming Without the Need to Apply High Programming VoltageEasy In-Circuit Programming via SMBus Data InterfaceWide PLL Divider Ratio Allows 0-ppm Output Clock ErrorClock Inputs Accept a Crystal or a Single-Ended LVCMOS or a Differential Input SignalAccepts Crystal Frequencies from 8 MHz up to 54 MHzAccepts LVCMOS or Differential Input Frequencies up to 200 MHzTwo Programmable Control Inputs [S0/S1, A0/A1] for User Defined Control SignalsSix LVCMOS Outputs with Output Frequencies up to 300 MHzLVCMOS Outputs can be Programmed for Complementary SignalsFree Selectable Output Frequency via Programmable Output Switching Matrix [6x6] Including 7-Bit Post-Divider for Each OutputPLL Loop Filter Components IntegratedLow Period Jitter (Typ 60 ps)Features Spread Spectrum Clocking (SSC) for Lowering System EMIProgrammable Output Slew-Rate Control (SRC) for Lowering System EMI3.3-V Device Power SupplyIndustrial Temperature Range -40°C to 85°CDevelopment and Programming Kit for Easy PLL Design and Programming (TI Pro-Clock™)Packaged in 20-Pin TSSOP
Description
AI
The CDCE706 is one of the smallest and powerful PLL synthesizer / multiplier / divider available today. Despite its small physical outlines, the CDCE706 is very flexible. It has the capability to produce an almost independent output frequency from a given input frequency.
The input frequency can be derived from a LVCMOS, differential input clock, or a single crystal. The appropriate input waveform can be selected via the SMBus data interface controller.
To achieve an independent output frequency the reference divider M and the feedback divider N for each PLL can be set to values from 1 up to 511 for the M-Divider and from 1 up to 4095 for the N-Divider. The PLL-VCO (voltage controlled oscillator) frequency than is routed to the free programmable output switching matrix to any of the six outputs. The switching matrix includes an additional 7-bit post-divider (1-to-127) and an inverting logic for each output.
The deep M/N divider ratio allows the generation of zero ppm clocks from any reference input frequency (e.g., a 27-MHz).
The CDCE706 includes three PLLs of those one supports SSC (spread-spectrum clocking). PLL1, PLL2, and PLL3 are designed for frequencies up to 300 MHz and optimized for zero-ppm applications with wide divider factors.
PLL2 also supports center-spread and down-spread spectrum clocking (SSC). This is a common technique to reduce electro-magnetic interference. Also, the slew-rate controllable (SRC) output edges minimize EMI noise.
Based on the PLL frequency and the divider settings, the internal loop filter components will be automatically adjusted to achieve high stability and optimized jitter transfer characteristic of the PLL.
The device supports non-volatile EEPROM programming for easy-customized application. It is preprogrammed with a factory default configuration (see Figure 13) and can be reprogrammed to a different application configuration before it goes onto the PCB or re-programmed by in-system programming. A different device setting is programmed via the serial SMBus Interface.
Two free programmable inputs, S0 and S1, can be used to control for each application the most demanding logic control settings (outputs disable to low, outputs 3-state, power down, PLL bypass, etc).
The CDCE706 has three power supply pins, VCC, VCCOUT1, and VCCOUT2. VCCis the power supply for the device. It operates from a single 3.3-V supply voltage. VCCOUT1and VCCOUT2are the power supply pins for the outputs. VCCOUT1supplies the outputs Y0 and Y1 and VCCOUT2supplies the outputs Y2, Y3, Y4, and Y5. Both outputs supplies can be 2.3 V to 3.6 V. At output voltages lower than 3.3 V, the output drive current is limited.
The CDCE706 is characterized for operation from -40°C to 85°C.
The CDCE706 is one of the smallest and powerful PLL synthesizer / multiplier / divider available today. Despite its small physical outlines, the CDCE706 is very flexible. It has the capability to produce an almost independent output frequency from a given input frequency.
The input frequency can be derived from a LVCMOS, differential input clock, or a single crystal. The appropriate input waveform can be selected via the SMBus data interface controller.
To achieve an independent output frequency the reference divider M and the feedback divider N for each PLL can be set to values from 1 up to 511 for the M-Divider and from 1 up to 4095 for the N-Divider. The PLL-VCO (voltage controlled oscillator) frequency than is routed to the free programmable output switching matrix to any of the six outputs. The switching matrix includes an additional 7-bit post-divider (1-to-127) and an inverting logic for each output.
The deep M/N divider ratio allows the generation of zero ppm clocks from any reference input frequency (e.g., a 27-MHz).
The CDCE706 includes three PLLs of those one supports SSC (spread-spectrum clocking). PLL1, PLL2, and PLL3 are designed for frequencies up to 300 MHz and optimized for zero-ppm applications with wide divider factors.
PLL2 also supports center-spread and down-spread spectrum clocking (SSC). This is a common technique to reduce electro-magnetic interference. Also, the slew-rate controllable (SRC) output edges minimize EMI noise.
Based on the PLL frequency and the divider settings, the internal loop filter components will be automatically adjusted to achieve high stability and optimized jitter transfer characteristic of the PLL.
The device supports non-volatile EEPROM programming for easy-customized application. It is preprogrammed with a factory default configuration (see Figure 13) and can be reprogrammed to a different application configuration before it goes onto the PCB or re-programmed by in-system programming. A different device setting is programmed via the serial SMBus Interface.
Two free programmable inputs, S0 and S1, can be used to control for each application the most demanding logic control settings (outputs disable to low, outputs 3-state, power down, PLL bypass, etc).
The CDCE706 has three power supply pins, VCC, VCCOUT1, and VCCOUT2. VCCis the power supply for the device. It operates from a single 3.3-V supply voltage. VCCOUT1and VCCOUT2are the power supply pins for the outputs. VCCOUT1supplies the outputs Y0 and Y1 and VCCOUT2supplies the outputs Y2, Y3, Y4, and Y5. Both outputs supplies can be 2.3 V to 3.6 V. At output voltages lower than 3.3 V, the output drive current is limited.
The CDCE706 is characterized for operation from -40°C to 85°C.