65C3243 Series
3- to 5.5-V multichannel 1Mbps RS-232 line driver/receiver with +/-15-kV ESD protection
Manufacturer: Texas Instruments
Catalog(3 parts)
| Part | Protocol | Mounting Type | Type | Data Rate▲▼ | Receiver Hysteresis▲▼ | Voltage - Supply▲▼ | Voltage - Supply▲▼ | Supplier Device Package | Duplex | Number of Drivers/Receivers▲▼ | Number of Drivers/Receivers▲▼ | Package / Case | Package / Case▲▼ | Package / Case▲▼ | Operating Temperature▲▼ | Operating Temperature▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
RS232 | Surface Mount | Transceiver | 1048576 bit/s | 0.5 V | 3 V | 5.5 V | 28-TSSOP | Full | 5 ul | 3 ul | 28-TSSOP | 0.004399999976158142 m | 0.004394200164824724 m | -40 °C | 85 °C | |
RS232 | Surface Mount | Transceiver | 1048576 bit/s | 0.5 V | 3 V | 5.5 V | 28-SSOP | Full | 5 ul | 3 ul | 28-SSOP | 0.0052999998442828655 m, 0.005308600142598152 m | -40 °C | 85 °C | ||
RS232 | Surface Mount | Transceiver | 1048576 bit/s | 0.5 V | 3 V | 5.5 V | 28-SSOP | Full | 5 ul | 3 ul | 28-SSOP | 0.0052999998442828655 m, 0.005308600142598152 m | -40 °C | 85 °C |
Key Features
• Operates With 3-V to 5.5-V VCCSupplyAlways-Active Noninverting Receiver Output (ROUT2B)Low Standby Current: 1 µA TypicalExternal Capacitors: 4 × 0.1 µFAccepts 5-V Logic Input With 3.3-V SupplyInter-Operable With SN65C3238, SN75C3238Supports Operation From 250 kbit/s to 1 Mbit/sRS-232 Bus-Pin ESD Protection Exceeds ±15 kV Using Human-Body Model (HBM)Operates With 3-V to 5.5-V VCCSupplyAlways-Active Noninverting Receiver Output (ROUT2B)Low Standby Current: 1 µA TypicalExternal Capacitors: 4 × 0.1 µFAccepts 5-V Logic Input With 3.3-V SupplyInter-Operable With SN65C3238, SN75C3238Supports Operation From 250 kbit/s to 1 Mbit/sRS-232 Bus-Pin ESD Protection Exceeds ±15 kV Using Human-Body Model (HBM)
Description
AI
The SN65C3243 and SN75C3243 consist of three line drivers, five line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). This device provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. In addition, this device includes an always-active noninverting output (ROUT2B), which allows applications using the ring indicator to transmit data while the device is powered down. The device operates at data signaling rates up to 1 Mbit/s and an increased slew-rate range of 24 V/µs to 150 V/µs.
The SN65C3243 and SN75C3243 consist of three line drivers, five line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). This device provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. In addition, this device includes an always-active noninverting output (ROUT2B), which allows applications using the ring indicator to transmit data while the device is powered down. The device operates at data signaling rates up to 1 Mbit/s and an increased slew-rate range of 24 V/µs to 150 V/µs.