430BT5190 Series
25 MHz MCU with 256KB Flash, 16KB SRAM, 12-bit ADC, Commercially Licensed Bluetooth v2.1 Stack
Manufacturer: Texas Instruments
Catalog(6 parts)
| Part | Interface | Operating Temperature▲▼ | Operating Temperature▲▼ | Applications | RAM Size▲▼ | Mounting Type | Number of I/O | Supplier Device Package | Package / Case | Voltage - Supply▲▼ | Voltage - Supply▲▼ | Program Memory Type | Program Memory Type▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments MSP430BT5190IZQWT | I2C, IrDA, SCI, SPI, UART/USART | -40 °C | 85 °C | Bluetooth | -257.1499938964844 °C | Surface Mount | 87 | 113-BGA Microstar Junior (7x7) | 113-VFBGA | 1.7999999523162842 V | 3.5999999046325684 V | FLASH | 2097152 b |
Texas Instruments MSP430BT5190IZQWR | I2C, IrDA, SCI, SPI, UART/USART | -40 °C | 85 °C | Bluetooth | -257.1499938964844 °C | Surface Mount | 87 | 113-BGA Microstar Junior (7x7) | 113-VFBGA | 1.7999999523162842 V | 3.5999999046325684 V | FLASH | 2097152 b |
Texas Instruments MSP430BT5190IZCAT | I2C, IrDA, SCI, SPI, UART/USART | -40 °C | 85 °C | Bluetooth | -257.1499938964844 °C | Surface Mount | 87 | 113-NFBGA (7x7) | 113-VFBGA | 1.7999999523162842 V | 3.5999999046325684 V | FLASH | 2097152 b |
Texas Instruments MSP430BT5190IPZ | I2C, IrDA, SCI, SPI, UART/USART | -40 °C | 85 °C | Bluetooth | -257.1499938964844 °C | Surface Mount | 87 | 100-LQFP (14x14) | 100-LQFP | 1.7999999523162842 V | 3.5999999046325684 V | FLASH | 2097152 b |
Texas Instruments MSP430BT5190IPZR | I2C, IrDA, SCI, SPI, UART/USART | -40 °C | 85 °C | Bluetooth | -257.1499938964844 °C | Surface Mount | 87 | 100-LQFP (14x14) | 100-LQFP | 1.7999999523162842 V | 3.5999999046325684 V | FLASH | 2097152 b |
Texas Instruments MSP430BT5190IZCAR | I2C, IrDA, SCI, SPI, UART/USART | -40 °C | 85 °C | Bluetooth | -257.1499938964844 °C | Surface Mount | 87 | 113-NFBGA (7x7) | 113-VFBGA | 1.7999999523162842 V | 3.5999999046325684 V | FLASH | 2097152 b |
Key Features
• Designed for use withCC2560TIBluetoothbased solutionsCommercially licensed Mindtree™ EthermindBluetoothStack for MSP430Bluetoothv2.1 + enhanced data rate (EDR) compliantSerial port profile (SPP)Sample applicationsLow supply voltage range: 3.6 V down to 1.8 VUltra-low power consumptionActive mode (AM): all system clocks active 230 µA/MHz at 8 MHz, 3 V, flash program execution (typical) 110 µA/MHz at 8 MHz, 3 V, RAM program execution (typical)Standby mode (LPM3): real-time clock (RTC) with crystal, watchdog, and supply supervisor operational, full RAM retention, fast wakeup: 1.7 µA at 2.2 V, 2.1 µA at 3 V (typical) low-power oscillator (VLO), general-purpose counter, watchdog, and supply supervisor operational, full RAM retention, fast wakeup: 1.2 µA at 3 V (typical)Off mode (LPM4): full RAM retention, supply supervisor operational, fast wakeup: 1.2 µA at 3 V (typical)Shutdown mode (LPM4.5): 0.1 µA at 3 V (typical)Wake up from standby mode in less than 5 µs16-bit RISC architectureFlexible power-management systemFully integrated LDO with programmable regulated core supply voltageSupply voltage supervision, monitoring, and brownoutUnified clock systemFLL control loop for frequency stabilizationLow-power low-frequency internal clock source (VLO)Low-frequency trimmed internal reference source (REFO)32-kHz crystalsHigh-frequency crystals up to 32 MHz16-bit timer TA0, Timer_A with five capture/compare registers16-bit timer TA1, Timer_A with three capture/compare registers16-bit timer TB0, Timer_B with seven capture/compare shadow registersUp to four universal serial communication interfaces (USCIs)USCI_A0, USCI_A1, USCI_A2, and USCI_A3 each support:Enhanced UART supports automatic baud-rate detectionIrDA encoder and decoderSynchronous SPIUSCI_B0, USCI_B1, USCI_B2, and USCI_B3 each support:I2CSynchronous SPI12-bit analog-to-digital converter (ADC)Internal reference14 external channels, 2 internal channelsHardware multiplier supports 32-bit operationsSerial onboard programming, no external programming voltage needed3-channel internal DMABasic timer with RTC featureDesigned for use withCC2560TIBluetoothbased solutionsCommercially licensed Mindtree™ EthermindBluetoothStack for MSP430Bluetoothv2.1 + enhanced data rate (EDR) compliantSerial port profile (SPP)Sample applicationsLow supply voltage range: 3.6 V down to 1.8 VUltra-low power consumptionActive mode (AM): all system clocks active 230 µA/MHz at 8 MHz, 3 V, flash program execution (typical) 110 µA/MHz at 8 MHz, 3 V, RAM program execution (typical)Standby mode (LPM3): real-time clock (RTC) with crystal, watchdog, and supply supervisor operational, full RAM retention, fast wakeup: 1.7 µA at 2.2 V, 2.1 µA at 3 V (typical) low-power oscillator (VLO), general-purpose counter, watchdog, and supply supervisor operational, full RAM retention, fast wakeup: 1.2 µA at 3 V (typical)Off mode (LPM4): full RAM retention, supply supervisor operational, fast wakeup: 1.2 µA at 3 V (typical)Shutdown mode (LPM4.5): 0.1 µA at 3 V (typical)Wake up from standby mode in less than 5 µs16-bit RISC architectureFlexible power-management systemFully integrated LDO with programmable regulated core supply voltageSupply voltage supervision, monitoring, and brownoutUnified clock systemFLL control loop for frequency stabilizationLow-power low-frequency internal clock source (VLO)Low-frequency trimmed internal reference source (REFO)32-kHz crystalsHigh-frequency crystals up to 32 MHz16-bit timer TA0, Timer_A with five capture/compare registers16-bit timer TA1, Timer_A with three capture/compare registers16-bit timer TB0, Timer_B with seven capture/compare shadow registersUp to four universal serial communication interfaces (USCIs)USCI_A0, USCI_A1, USCI_A2, and USCI_A3 each support:Enhanced UART supports automatic baud-rate detectionIrDA encoder and decoderSynchronous SPIUSCI_B0, USCI_B1, USCI_B2, and USCI_B3 each support:I2CSynchronous SPI12-bit analog-to-digital converter (ADC)Internal reference14 external channels, 2 internal channelsHardware multiplier supports 32-bit operationsSerial onboard programming, no external programming voltage needed3-channel internal DMABasic timer with RTC feature
Description
AI
The TI MSP430™ family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 5 µs.
MSP430BT5190 is a microcontroller configuration with three 16-bit timers, a high-performance 12-bit ADC, four USCIs, a hardware multiplier, DMA, an RTC module with alarm capabilities, and 87 I/O pins.
The MSP430BT5190 microcontroller is designed for commercial use with TI’s CC2560 basedBluetoothsolutions in conjunction with Mindtree’s EthermindBluetoothstack and SPP. This MSP430BT5190+CC2560Bluetoothplatform is ideal for applications that need a wireless serial link for cable replacement, such as remote controls, thermostats, smart meters, blood glucose meters, pulseoximeters, and many others.
For complete module descriptions, see theMSP430x5xx and MSP430x6xx Family User’s Guide
The TI MSP430™ family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 5 µs.
MSP430BT5190 is a microcontroller configuration with three 16-bit timers, a high-performance 12-bit ADC, four USCIs, a hardware multiplier, DMA, an RTC module with alarm capabilities, and 87 I/O pins.
The MSP430BT5190 microcontroller is designed for commercial use with TI’s CC2560 basedBluetoothsolutions in conjunction with Mindtree’s EthermindBluetoothstack and SPP. This MSP430BT5190+CC2560Bluetoothplatform is ideal for applications that need a wireless serial link for cable replacement, such as remote controls, thermostats, smart meters, blood glucose meters, pulseoximeters, and many others.
For complete module descriptions, see theMSP430x5xx and MSP430x6xx Family User’s Guide