Catalog(3 parts)
| Part | Voltage - Input▲▼ | Voltage - Input▲▼ | Current - Output▲▼ | Board Type | Outputs and Type | Outputs and Type▲▼ | Voltage - Output▲▼ | Supplied Contents | Utilized IC / Part | Frequency - Switching▲▼ | Main Purpose | Synchronous Rectifier▲▼ | Voltage - Input (Max)▲▼ | Output Type | Voltage - Output (Min/Fixed)▲▼ | Operating Temperature▲▼ | Operating Temperature▲▼ | Topology | Number of Outputs▲▼ | Output Configuration | Mounting Type | Package / Case | Supplier Device Package | Voltage - Input (Min)▲▼ | Function | Voltage - Output (Max)▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS54610EVM-192TPS54610 SWIFT™ DC/DC, Step Down 1, Non-Isolated Outputs Evaluation Board | 4 V | 6 V | 6 A | Fully Populated | Non-Isolated | 1 ul | 3.299999952316284 V | Board(s) | TPS54610 | 350000 Hz | DC/DC, Step Down | |||||||||||||||
Texas Instruments TPS54610MPWPREPBuck Switching Regulator IC Positive Adjustable 0.891V 1 Output 6A 28-PowerTSSOP (0.173", 4.40mm Width) | 6 A | 350000 Hz, 550000 Hz | 6 V | Adjustable | 0.890999972820282 V | 125 °C | -55 °C | Buck | 1 ul | Positive | Surface Mount | 28-PowerTSSOP | 28-HTSSOP | 3 V | Step-Down | 5.400000095367432 V | ||||||||||
Texas Instruments TPS54610PWPG4Buck Switching Regulator IC Positive Adjustable 0.891V 1 Output 6A 28-PowerTSSOP (0.173", 4.40mm Width) | 6 A | 350000 Hz, 550000 Hz | 6 V | Adjustable | 0.890999972820282 V | 85 °C | -40 °C | Buck | 1 ul | Positive | Surface Mount | 28-PowerTSSOP | 28-HTSSOP | 3 V | Step-Down | 5.400000095367432 V |
Key Features
• 30-mΩ, 12-A Peak MOSFET Switches for High Efficiency at 6-A Continuous Output Source or Sink CurrentAdjustable Output Voltage Down to 0.9 V With 1.0% AccuracyWide PWM Frequency: Fixed 350 kHz, 550 kHz or Adjustable 280 kHz to 700 kHzSynchronizable to 700 kHzLoad Protected by Peak Current Limit and Thermal ShutdownIntegrated Solution Reduces Board Area and Component CountSWIFT Documentation, Application Notes, and Design Software:www.ti.com/swift30-mΩ, 12-A Peak MOSFET Switches for High Efficiency at 6-A Continuous Output Source or Sink CurrentAdjustable Output Voltage Down to 0.9 V With 1.0% AccuracyWide PWM Frequency: Fixed 350 kHz, 550 kHz or Adjustable 280 kHz to 700 kHzSynchronizable to 700 kHzLoad Protected by Peak Current Limit and Thermal ShutdownIntegrated Solution Reduces Board Area and Component CountSWIFT Documentation, Application Notes, and Design Software:www.ti.com/swift
Description
AI
The TPS54610 low-input voltage high-output current synchronous buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that enables maximum performance and flexibility in choosing the output filter L and C components; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 3 V; an internally or externally set slow-start circuit to limit inrush currents; and a power good output useful for processor/logic reset, fault signaling, and supply sequencing.
The TPS54610 is available in a thermally enhanced 28-pin HTSSOP (PWP) PowerPAD™ package, which eliminates bulky heatsinks. TI provides evaluation modules to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.
The TPS54610 low-input voltage high-output current synchronous buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that enables maximum performance and flexibility in choosing the output filter L and C components; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 3 V; an internally or externally set slow-start circuit to limit inrush currents; and a power good output useful for processor/logic reset, fault signaling, and supply sequencing.
The TPS54610 is available in a thermally enhanced 28-pin HTSSOP (PWP) PowerPAD™ package, which eliminates bulky heatsinks. TI provides evaluation modules to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.