TRF37C75 Series
40 to 4000 MHz 18dB RF Gain Block Amplifier with Powerdown Pin
Manufacturer: Texas Instruments
Catalog(0 parts)
| Part |
|---|
No parts found Try adjusting your search criteria |
Key Features
• 40 MHz – 4000 MHzGain: 18 dBNoise Figure: 3.5 dBOutput P1dB: 19.5 dBm at 2000 MHzOutput IP3: 34 dBm at 2000 MHzPower Down ModeSingle Supply: 5 VStabilized Performance Over TemperatureUnconditionally StableRobust ESD: >1 kV HBM; >1 kV CDM40 MHz – 4000 MHzGain: 18 dBNoise Figure: 3.5 dBOutput P1dB: 19.5 dBm at 2000 MHzOutput IP3: 34 dBm at 2000 MHzPower Down ModeSingle Supply: 5 VStabilized Performance Over TemperatureUnconditionally StableRobust ESD: >1 kV HBM; >1 kV CDM
Description
AI
The TRF37C75 is packaged in a 2.00mm × 2.00mm WSON with a power down pin making it ideal for applications where space and low power modes are critical.
The TRF37C75 is designed for ease of use. For maximum flexibility, this family of parts uses a common 5 V supply and consumes 85 mA. In addition, this family was designed with an active bias circuit that provides a stable and predictable bias current over process, temperature and voltage variations. For gain and linearity budgets the device was designed to provide a flat gain response and excellent OIP3 out to 4000 MHz. For space constrained applications this family is internally matched to 50 Ω which simplifies ease of use and minimizes needed PCB area.
The TRF37C75 is packaged in a 2.00mm × 2.00mm WSON with a power down pin making it ideal for applications where space and low power modes are critical.
The TRF37C75 is designed for ease of use. For maximum flexibility, this family of parts uses a common 5 V supply and consumes 85 mA. In addition, this family was designed with an active bias circuit that provides a stable and predictable bias current over process, temperature and voltage variations. For gain and linearity budgets the device was designed to provide a flat gain response and excellent OIP3 out to 4000 MHz. For space constrained applications this family is internally matched to 50 Ω which simplifies ease of use and minimizes needed PCB area.