TSB82AF15 Series
Enhanced product PCI EXPRESS®-based IEEE 1394b OHCI host controller
Manufacturer: Texas Instruments
Catalog(1 parts)
| Part | Function | Protocol | Operating Temperature▲▼ | Operating Temperature▲▼ | Voltage - Supply▲▼ | Voltage - Supply▲▼ | Package / Case | Supplier Device Package | Interface |
|---|---|---|---|---|---|---|---|---|---|
Controller | PCI | 110 °C | -40 °C | 1.600000023841858 V | 1.399999976158142 V | 100-TQFP | 100-TQFP (14x14) | PCI |
Key Features
• PCI Express™ based 1394b Open Host Controller Interface (OHCI) link layer controllerTQFP package simplifies board routing and eases board inspectionStand-alone link layer controller provides flexibility to interface with a 1394b s400 or a 1394b s800 physical layer controllerFully compliant with 1394 OHCI specification, revision 1.1 and revision 1.2 draftCompliant with PCI Express™ (PCIe) base specification, revision 1.1. See Section 11.1Fully supports provisions of IEEE Std P1394b-2002, IEEE Std 1394-1995 and IEEE Std 1394a-2000EEPROM configuration support to load Global Unique ID for 1394 fabricUtilizes 100-MHz differential PCI Express™ common reference clockSupport for D1, D2, D3hotActive-state link power management saves power when packet activity on the PCI Express™ link is idle, using both L0s and L1 statesEight 3.3-V multifunction General-Purpose I/O (GPIO) terminalsSupports defense, aerospace, and medical applications:Controlled baselineOne assembly/test site and one fabrication siteExtended product life cycle and product-change notificationPCI Express™ based 1394b Open Host Controller Interface (OHCI) link layer controllerTQFP package simplifies board routing and eases board inspectionStand-alone link layer controller provides flexibility to interface with a 1394b s400 or a 1394b s800 physical layer controllerFully compliant with 1394 OHCI specification, revision 1.1 and revision 1.2 draftCompliant with PCI Express™ (PCIe) base specification, revision 1.1. See Section 11.1Fully supports provisions of IEEE Std P1394b-2002, IEEE Std 1394-1995 and IEEE Std 1394a-2000EEPROM configuration support to load Global Unique ID for 1394 fabricUtilizes 100-MHz differential PCI Express™ common reference clockSupport for D1, D2, D3hotActive-state link power management saves power when packet activity on the PCI Express™ link is idle, using both L0s and L1 statesEight 3.3-V multifunction General-Purpose I/O (GPIO) terminalsSupports defense, aerospace, and medical applications:Controlled baselineOne assembly/test site and one fabrication siteExtended product life cycle and product-change notification
Description
AI
The Texas Instruments TSB82AF15-EP is a single-function PCI Express™ (PCIe) to PCI local bus translation bridge, where the PCI bus interface is internally connected to a 1394b open host controller/link-layer controller. When the TSB82AF15-EP is properly configured, this solution provides full PCIe to 1394 link layer controller.
The TSB82AF15-EP simultaneously supports up to four posted write transactions, four nonposted transactions, and four completion transactions pending in each direction at any time. Each posted write data queue and completion data queue can store up to 8K bytes of data. The non-posted data queues can store up to 128 bytes of data.
The Texas Instruments TSB82AF15-EP is a single-function PCI Express™ (PCIe) to PCI local bus translation bridge, where the PCI bus interface is internally connected to a 1394b open host controller/link-layer controller. When the TSB82AF15-EP is properly configured, this solution provides full PCIe to 1394 link layer controller.
The TSB82AF15-EP simultaneously supports up to four posted write transactions, four nonposted transactions, and four completion transactions pending in each direction at any time. Each posted write data queue and completion data queue can store up to 8K bytes of data. The non-posted data queues can store up to 128 bytes of data.