Catalog(2 parts)
| Part | Type | Supplier Device Package | Voltage - Supply, Digital▲▼ | Voltage - Supply, Digital▲▼ | Mounting Type | Package / Case | Applications | Voltage - Supply, Analog▲▼ | Voltage - Supply, Analog▲▼ |
|---|---|---|---|---|---|---|---|---|---|
Video Decoder | 32-TQFP (5x5) | 1.649999976158142 V | 1.950000047683716 V | Surface Mount | 32-TQFP | Cell Phones, PDA, Players | 1.649999976158142 V | 1.950000047683716 V | |
Video Decoder | 32-TQFP (5x5) | 1.649999976158142 V | 1.950000047683716 V | Surface Mount | 32-TQFP | Cell Phones, PDA, Players | 1.649999976158142 V | 1.950000047683716 V |
Key Features
• Accepts NTSC (J, M, 4.43), PAL (B, D, G, H, I, M, N, Nc),and SECAM (B, D, G, K, K1, L) VideoSupports ITU-R BT.601 Standard SamplingHigh-Speed 9-Bit Analog-to-Digital Converter (ADC)Two Composite Inputs or One S-Video InputFully Differential CMOS Analog Preprocessing ChannelsWith Clamping and Automatic Gain Control (AGC) forBest Signal-to-Noise (S/N) PerformanceUltralow Power Consumption48-Terminal PBGA Package (ZQC) or 32-Terminal TQFP Package (PBS)Power-Down Mode: <1 mWBrightness, Saturation, Hue, and Sharpness Control Through I2CComplementary 4-Line (3-H Delay) Adaptive Comb Filters forBoth Cross-Luminance and Cross-Chrominance Noise ReductionPatented Architecture for Locking to Weak, Noisy, or Unstable SignalsSingle 27.000-MHz Crystal for All StandardsInternal Phase-Locked Loop (PLL) for Line-Locked Clock and SamplingSubcarrier Genlock Output for Synchronizing Color Subcarrier of External EncoderVariable Digital I/O Supply Voltage Range from 1.8 V to 3.3 VStandard Programmable Video Output FormatsITU-R BT.656, 8-Bit 4:2:2 With Embedded Syncs8-Bit 4:2:2 With Discrete SyncsMacrovision™ Copy Protection DetectionAdvanced Programmable Video Output Formats2× Oversampled Raw Vertical Blanking Interval (VBI)Data During Active VideoSliced VBI Data During Horizontal Blanking or Active VideoVBI Modes SupportedTeletext (NABTS, WST)Closed-Caption Decode With FIFO and Extended Data Services (XDS)Wide Screen Signaling, Video Program System, CGMS-A, Vertical Interval Time CodeGemstar 1x/2x Electronic Program Guide Compatible ModeCustom Configuration Mode That Allows User to Program Slice Enginefor Unique VBI Data SignalsPower-On ResetIndustrial Temperature Range (TVP5151I): –40°C to 85°CAccepts NTSC (J, M, 4.43), PAL (B, D, G, H, I, M, N, Nc),and SECAM (B, D, G, K, K1, L) VideoSupports ITU-R BT.601 Standard SamplingHigh-Speed 9-Bit Analog-to-Digital Converter (ADC)Two Composite Inputs or One S-Video InputFully Differential CMOS Analog Preprocessing ChannelsWith Clamping and Automatic Gain Control (AGC) forBest Signal-to-Noise (S/N) PerformanceUltralow Power Consumption48-Terminal PBGA Package (ZQC) or 32-Terminal TQFP Package (PBS)Power-Down Mode: <1 mWBrightness, Saturation, Hue, and Sharpness Control Through I2CComplementary 4-Line (3-H Delay) Adaptive Comb Filters forBoth Cross-Luminance and Cross-Chrominance Noise ReductionPatented Architecture for Locking to Weak, Noisy, or Unstable SignalsSingle 27.000-MHz Crystal for All StandardsInternal Phase-Locked Loop (PLL) for Line-Locked Clock and SamplingSubcarrier Genlock Output for Synchronizing Color Subcarrier of External EncoderVariable Digital I/O Supply Voltage Range from 1.8 V to 3.3 VStandard Programmable Video Output FormatsITU-R BT.656, 8-Bit 4:2:2 With Embedded Syncs8-Bit 4:2:2 With Discrete SyncsMacrovision™ Copy Protection DetectionAdvanced Programmable Video Output Formats2× Oversampled Raw Vertical Blanking Interval (VBI)Data During Active VideoSliced VBI Data During Horizontal Blanking or Active VideoVBI Modes SupportedTeletext (NABTS, WST)Closed-Caption Decode With FIFO and Extended Data Services (XDS)Wide Screen Signaling, Video Program System, CGMS-A, Vertical Interval Time CodeGemstar 1x/2x Electronic Program Guide Compatible ModeCustom Configuration Mode That Allows User to Program Slice Enginefor Unique VBI Data SignalsPower-On ResetIndustrial Temperature Range (TVP5151I): –40°C to 85°C
Description
AI
The TVP5151 device is an ultralow-power NTSC/PAL/SECAM video decoder. Available in a space-saving 48-terminal PBGA package or a 32-terminal TQFP package, the TVP5151 decoder converts NTSC, PAL, and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also available. The optimized architecture of the TVP5151 decoder allows for ultralow power consumption. The decoder consumes 138-mW power under typical operating conditions and consumes less than 1 mW in power-down mode, considerably increasing battery life in portable applications. The decoder uses just one crystal for all supported standards. The TVP5151 decoder can be programmed using an I2C serial interface.
The TVP5151 decoder converts baseband analog video into digital YCbCr 4:2:2 component video. Composite and S-video inputs are supported. The TVP5151 decoder includes one 9-bit analog-to-digital converter (ADC) with 2× sampling. Sampling is ITU-R BT.601 (27.0 MHz, generated from the 27.000-MHz crystal or oscillator input) and is line locked. The output formats can be 8-bit 4:2:2 or 8-bit ITU-R BT.656 with embedded synchronization.
The TVP5151 decoder utilizes Texas Instruments patented technology for locking to weak, noisy, or unstable signals. A Genlock/real-time control (RTC) output is generated for synchronizing downstream video encoders.
Complementary four-line adaptive comb filtering is available for both the luminance and chrominance data paths to reduce both cross-luminance and cross-chrominance artifacts; a chrominance trap filter is also available.
Video characteristics including hue, brightness, saturation, and sharpness may be programmed using the industry standard I2C serial interface. The TVP5151 decoder generates synchronization, blanking, lock, and clock signals in addition to digital video outputs. The TVP5151 decoder includes methods for advanced vertical blanking interval (VBI) data retrieval. The VBI data processor slices, parses, and performs error checking on teletext, closed caption, and other data in several formats.
The TVP5151 decoder detects copy-protected input signals according to the Macrovision™ standard and detects Type 1, 2, 3, and colorstripe processes.
The main blocks of the TVP5151 decoder include:
The TVP5151 device is an ultralow-power NTSC/PAL/SECAM video decoder. Available in a space-saving 48-terminal PBGA package or a 32-terminal TQFP package, the TVP5151 decoder converts NTSC, PAL, and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also available. The optimized architecture of the TVP5151 decoder allows for ultralow power consumption. The decoder consumes 138-mW power under typical operating conditions and consumes less than 1 mW in power-down mode, considerably increasing battery life in portable applications. The decoder uses just one crystal for all supported standards. The TVP5151 decoder can be programmed using an I2C serial interface.
The TVP5151 decoder converts baseband analog video into digital YCbCr 4:2:2 component video. Composite and S-video inputs are supported. The TVP5151 decoder includes one 9-bit analog-to-digital converter (ADC) with 2× sampling. Sampling is ITU-R BT.601 (27.0 MHz, generated from the 27.000-MHz crystal or oscillator input) and is line locked. The output formats can be 8-bit 4:2:2 or 8-bit ITU-R BT.656 with embedded synchronization.
The TVP5151 decoder utilizes Texas Instruments patented technology for locking to weak, noisy, or unstable signals. A Genlock/real-time control (RTC) output is generated for synchronizing downstream video encoders.
Complementary four-line adaptive comb filtering is available for both the luminance and chrominance data paths to reduce both cross-luminance and cross-chrominance artifacts; a chrominance trap filter is also available.
Video characteristics including hue, brightness, saturation, and sharpness may be programmed using the industry standard I2C serial interface. The TVP5151 decoder generates synchronization, blanking, lock, and clock signals in addition to digital video outputs. The TVP5151 decoder includes methods for advanced vertical blanking interval (VBI) data retrieval. The VBI data processor slices, parses, and performs error checking on teletext, closed caption, and other data in several formats.
The TVP5151 decoder detects copy-protected input signals according to the Macrovision™ standard and detects Type 1, 2, 3, and colorstripe processes.
The main blocks of the TVP5151 decoder include: