BQ24195L Series
I2C controlled 2.5A single cell charger with 5.1V, 1-A Synchronous boost Operation
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
I2C controlled 2.5A single cell charger with 5.1V, 1-A Synchronous boost Operation
| Part | Number of Cells | Fault Protection | Package / Case | Voltage - Supply (Max) [Max] | Operating Temperature [Max] | Operating Temperature [Min] | Battery Pack Voltage | Battery Chemistry | Charge Current - Max [Max] | Mounting Type | Supplier Device Package | Current - Charging | Interface |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments BQ24195LRGER | 1 | Over Current, Over Temperature, Over Voltage | 24-VFQFN Exposed Pad | 17 V | 85 °C | -40 °C | 4.2 V | Lithium Ion/Polymer | 2.5 A | Surface Mount | 24-VQFN (4x4) | Constant - Programmable | I2C |
Texas Instruments BQ24195LRGET | 1 | Over Current, Over Temperature, Over Voltage | 24-VFQFN Exposed Pad | 17 V | 85 °C | -40 °C | 4.2 V | Lithium Ion/Polymer | 2.5 A | Surface Mount | 24-VQFN (4x4) | Constant - Programmable | I2C |
Key Features
• High Efficiency Switch Mode Charger2.5-A (bq24195L) or 4.5-A (bq24195) Fast Charging92% Charge Efficiency at 2 A, 90% at 4 ASynchronous Boost Converter in Battery Boost Mode5.1 V at 1 A (bq24195L) or 5.1 V at 2.1 A (bq24195)94% 5.1-V Boost Efficiency at 1 A, 91% at 2.1 AHighest Battery Discharge Efficiency with 12-mΩBattery Discharge MOSFET up to 9-A Discharge CurrentSingle Input USB-compliant/Adapter ChargerUSB Host or Charging Port D+/D- Detection Compatibleto USB Battery Charger Spec 1.2Input Voltage and Current Limit Supports USB2.0 and USB3.0Input Current Limit: 100 mA, 150 mA, 500 mA, 900 mA, 1.2 A,1.5 A, 2 A and 3 A3.9-V to 17-V Input Operating Voltage RangeSupport All Kinds of Adapter with Input Voltage DPMRegulationNarrow VDC (NVDC) Power Path ManagementInstant-on Works with No Battery or Deeply DischargedBatteryIdeal Diode Operation in Battery Supplement Mode1.5-MHz Switching Frequency for Low Profile InductorAutonomous Battery Charging with or without HostManagementBattery Charge EnableBattery Charge PreconditioningCharge Termination and RechargeHigh Accuracy (0°C to 125°C)±0.5% Charge Voltage Regulation±7% Charge Current Regulation±7.5% Input Current Regulation±2% Output Regulation in Boost ModeHigh IntegrationPower Path ManagementSynchronous Switching MOSFETsIntegrated Current SensingBootstrap DiodeInternal Loop CompensationSafetyBattery Temperature Sensing and Charging Safety TimerThermal Regulation and Thermal ShutdownInput System Over-Voltage ProtectionMOSFET Over-Current ProtectionCharge Status Outputs for LED or Host ProcessorLow Battery Leakage Current and Support Shipping Mode4.00 mm × 4.00 mm QFN-24 PackageHigh Efficiency Switch Mode Charger2.5-A (bq24195L) or 4.5-A (bq24195) Fast Charging92% Charge Efficiency at 2 A, 90% at 4 ASynchronous Boost Converter in Battery Boost Mode5.1 V at 1 A (bq24195L) or 5.1 V at 2.1 A (bq24195)94% 5.1-V Boost Efficiency at 1 A, 91% at 2.1 AHighest Battery Discharge Efficiency with 12-mΩBattery Discharge MOSFET up to 9-A Discharge CurrentSingle Input USB-compliant/Adapter ChargerUSB Host or Charging Port D+/D- Detection Compatibleto USB Battery Charger Spec 1.2Input Voltage and Current Limit Supports USB2.0 and USB3.0Input Current Limit: 100 mA, 150 mA, 500 mA, 900 mA, 1.2 A,1.5 A, 2 A and 3 A3.9-V to 17-V Input Operating Voltage RangeSupport All Kinds of Adapter with Input Voltage DPMRegulationNarrow VDC (NVDC) Power Path ManagementInstant-on Works with No Battery or Deeply DischargedBatteryIdeal Diode Operation in Battery Supplement Mode1.5-MHz Switching Frequency for Low Profile InductorAutonomous Battery Charging with or without HostManagementBattery Charge EnableBattery Charge PreconditioningCharge Termination and RechargeHigh Accuracy (0°C to 125°C)±0.5% Charge Voltage Regulation±7% Charge Current Regulation±7.5% Input Current Regulation±2% Output Regulation in Boost ModeHigh IntegrationPower Path ManagementSynchronous Switching MOSFETsIntegrated Current SensingBootstrap DiodeInternal Loop CompensationSafetyBattery Temperature Sensing and Charging Safety TimerThermal Regulation and Thermal ShutdownInput System Over-Voltage ProtectionMOSFET Over-Current ProtectionCharge Status Outputs for LED or Host ProcessorLow Battery Leakage Current and Support Shipping Mode4.00 mm × 4.00 mm QFN-24 Package
Description
AI
The bq24195L, bq24195 are highly-integrated switch-mode battery charge management and system power path management devices for single cell Li-Ion and Li-polymer battery in a wide range of power bank, tablet and other portable devices.
Its low impedance power path optimizes switch-mode operation efficiency, reduces battery charging time and extends battery life during discharging phase. The I2C serial interface with charging and system settings makes the device a truly flexible solution.
The device supports a wide range of input sources, including standard USB host port, USB charging port and high power DC adapter. To set the default input current limit, the bq24195L, bq24195 detects the input source following the USB battery charging spec 1.2. The bq24195/bq24195L are compliant with USB 2.0 and USB 3.0 power specifications with input current and voltage regulation. The bq24195L, bq24195 supports battery boost operation by supplying 5.1 V on PMID pin with minimum current of 1.0 A (bq24195L) or 2.1 A (bq24195).
The power path management regulates the system slightly above battery voltage but does not drop below 3.5-V minimum system voltage (programmable). With this feature, the system maintains operation even when the battery is completely depleted or removed. When the input current limit or voltage limit is reached, the power path management automatically reduces the charge current to zero. As the system load continues to increase, the power path discharges the battery until the system power requirement is met. This supplement mode operation prevents overloading the input source.
The devices initiate and complete a charging cycle without software control. It automatically detects the battery voltage and charges the battery in three phases: pre-conditioning, constant current and constant voltage. At the end of the charging cycle, the charger automatically terminates when the charge current is below a preset limit in the constant voltage phase. When the full battery falls below the recharge threshold, the charger will automatically start another charging cycle.
The devices provide various safety features for battery charging and system operation, including negative thermistor monitoring, charging safety timer and over-voltage/over-current protections. The thermal regulation reduces charge current when the junction temperature exceeds 120°C (programmable).
The STAT output reports the charging status and any fault conditions. The INT immediately notifies the host when a fault occurs.
The bq24195 and bq24195L are available in a 24-pin, 4.00 × 4.00 mm2thin VQFN package.
The bq24195L, bq24195 are highly-integrated switch-mode battery charge management and system power path management devices for single cell Li-Ion and Li-polymer battery in a wide range of power bank, tablet and other portable devices.
Its low impedance power path optimizes switch-mode operation efficiency, reduces battery charging time and extends battery life during discharging phase. The I2C serial interface with charging and system settings makes the device a truly flexible solution.
The device supports a wide range of input sources, including standard USB host port, USB charging port and high power DC adapter. To set the default input current limit, the bq24195L, bq24195 detects the input source following the USB battery charging spec 1.2. The bq24195/bq24195L are compliant with USB 2.0 and USB 3.0 power specifications with input current and voltage regulation. The bq24195L, bq24195 supports battery boost operation by supplying 5.1 V on PMID pin with minimum current of 1.0 A (bq24195L) or 2.1 A (bq24195).
The power path management regulates the system slightly above battery voltage but does not drop below 3.5-V minimum system voltage (programmable). With this feature, the system maintains operation even when the battery is completely depleted or removed. When the input current limit or voltage limit is reached, the power path management automatically reduces the charge current to zero. As the system load continues to increase, the power path discharges the battery until the system power requirement is met. This supplement mode operation prevents overloading the input source.
The devices initiate and complete a charging cycle without software control. It automatically detects the battery voltage and charges the battery in three phases: pre-conditioning, constant current and constant voltage. At the end of the charging cycle, the charger automatically terminates when the charge current is below a preset limit in the constant voltage phase. When the full battery falls below the recharge threshold, the charger will automatically start another charging cycle.
The devices provide various safety features for battery charging and system operation, including negative thermistor monitoring, charging safety timer and over-voltage/over-current protections. The thermal regulation reduces charge current when the junction temperature exceeds 120°C (programmable).
The STAT output reports the charging status and any fault conditions. The INT immediately notifies the host when a fault occurs.
The bq24195 and bq24195L are available in a 24-pin, 4.00 × 4.00 mm2thin VQFN package.