WL1807 Series
WiLink™ 8 industrial dual band combo, 2x2 MIMO Wi-Fi module
Manufacturer: Texas Instruments
Catalog(1 parts)
| Part | Current - Transmitting▲▼ | Type | Voltage - Supply▲▼ | Voltage - Supply▲▼ | Serial Interfaces | Operating Temperature▲▼ | Operating Temperature▲▼ | Power - Output▲▼ | Current - Receiving▲▼ | GPIO▲▼ | RF Family/Standard | Data Rate (Max)▲▼ | Mounting Type | Supplier Device Package | Protocol | Package / Case | Frequency▲▼ | Sensitivity▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments WL1807MODGIMOCRIC RF TxRx + MCU Bluetooth, WiFi 802.11a/b/g/n, Bluetooth v4.1 2.4GHz, 5GHz 100-SMD Module | 0.5099999904632568 A | TxRx + MCU | 2.9000000953674316 V | 4.800000190734863 V | UART | -40 °C | 85 °C | 18.5 ul | 0.08500000089406967 A | 7 ul | Bluetooth, WiFi | 56623104 bit/s | Surface Mount | 100-QFM | 802.11a/b/g/n, Bluetooth v4.1 | 100-SMD Module | 2400000000 Hz, 5000000000 Hz | -95 ul |
Key Features
• GeneralIntegrates RF, power amplifiers (PAs), clock, RF switches, filters, passives, and power managementQuick hardware design with TI module collateral and reference designsOperating temperature: –40°C to +85°C industrial temperature gradeSmall form factor: 13.3 × 13.4 × 2 mm100-pin MOC packageFCC, IC, ETSI/CE, and TELEC certified with PCB, dipole, chip, and PIFA antennasWi-FiWLAN baseband processor and RF transceiver support of IEEE Std 802.11a, 802.11b, 802.11g, and 802.11n20- and 40-MHz SISO and 20-MHz 2 × 2 MIMO at 2.4 GHz for high throughput: 80 Mbps (TCP), 100 Mbps (UDP)2.4-GHz MRC support for extended range and 5-GHz diversity capableFully calibrated: production calibration not required4-bit SDIO host interface supportWi-Fi direct concurrent operation (multichannel, multirole)Bluetooth and Bluetooth low energy ( WL1837MOD only)Bluetooth 5.1 secure connection compliant and CSA2 support (declaration ID: D052427 )Host controller interface (HCI) transport for Bluetooth over UARTDedicated audio processor support of SBC encoding + A2DPDual-mode Bluetooth and Bluetooth low energyTI’s Bluetooth and Bluetooth low energy certified stackKey benefitsReduces design overheadDifferentiated use cases by configuring WiLink™ 8 simultaneously in two roles (STA and AP) to connect directly with other Wi-Fi devices on different RF channel (Wi-Fi networks)Best-in-class Wi-Fi with high-performance audio and video streaming reference applications with up to 1.4× the range versus one antennaDifferent provisioning methods for in-home devices connectivity to Wi-Fi in one stepLowest Wi-Fi power consumption in connected idle (< 800 µA)Configurable wake on WLAN filters to only wake up the systemWi-Fi and Bluetooth single antenna coexistenceGeneralIntegrates RF, power amplifiers (PAs), clock, RF switches, filters, passives, and power managementQuick hardware design with TI module collateral and reference designsOperating temperature: –40°C to +85°C industrial temperature gradeSmall form factor: 13.3 × 13.4 × 2 mm100-pin MOC packageFCC, IC, ETSI/CE, and TELEC certified with PCB, dipole, chip, and PIFA antennasWi-FiWLAN baseband processor and RF transceiver support of IEEE Std 802.11a, 802.11b, 802.11g, and 802.11n20- and 40-MHz SISO and 20-MHz 2 × 2 MIMO at 2.4 GHz for high throughput: 80 Mbps (TCP), 100 Mbps (UDP)2.4-GHz MRC support for extended range and 5-GHz diversity capableFully calibrated: production calibration not required4-bit SDIO host interface supportWi-Fi direct concurrent operation (multichannel, multirole)Bluetooth and Bluetooth low energy ( WL1837MOD only)Bluetooth 5.1 secure connection compliant and CSA2 support (declaration ID: D052427 )Host controller interface (HCI) transport for Bluetooth over UARTDedicated audio processor support of SBC encoding + A2DPDual-mode Bluetooth and Bluetooth low energyTI’s Bluetooth and Bluetooth low energy certified stackKey benefitsReduces design overheadDifferentiated use cases by configuring WiLink™ 8 simultaneously in two roles (STA and AP) to connect directly with other Wi-Fi devices on different RF channel (Wi-Fi networks)Best-in-class Wi-Fi with high-performance audio and video streaming reference applications with up to 1.4× the range versus one antennaDifferent provisioning methods for in-home devices connectivity to Wi-Fi in one stepLowest Wi-Fi power consumption in connected idle (< 800 µA)Configurable wake on WLAN filters to only wake up the systemWi-Fi and Bluetooth single antenna coexistence
Description
AI
The certified WiLink™ 8 module from TI offers high throughput and extended range along with Wi-Fi ® and Bluetooth ® coexistence (WL1837MOD only) in a power-optimized design. The WL18x7MOD is a Wi-Fi, dual-band, 2.4- and 5-GHz module solution with two antennas supporting industrial temperature grade. The device is FCC, IC, ETSI/CE, and TELEC certified for AP (with DFS support) and client. TI offers drivers for high-level operating systems, such as Linux and Android™. Additional drivers, such as WinCE and RTOS, which includes QNX, Nucleus, ThreadX, and FreeRTOS, are supported through third parties.
The certified WiLink™ 8 module from TI offers high throughput and extended range along with Wi-Fi ® and Bluetooth ® coexistence (WL1837MOD only) in a power-optimized design. The WL18x7MOD is a Wi-Fi, dual-band, 2.4- and 5-GHz module solution with two antennas supporting industrial temperature grade. The device is FCC, IC, ETSI/CE, and TELEC certified for AP (with DFS support) and client. TI offers drivers for high-level operating systems, such as Linux and Android™. Additional drivers, such as WinCE and RTOS, which includes QNX, Nucleus, ThreadX, and FreeRTOS, are supported through third parties.