Catalog(1 parts)
| Part | Package / Case | Supplier Device Package | Supplier Device Package▲▼ | Supplier Device Package▲▼ | Mounting Type | Operating Temperature▲▼ | Operating Temperature▲▼ | Number of Outputs▲▼ | Current - Output▲▼ | Topology | Output Type | Voltage - Input (Min)▲▼ | Function | Output Configuration | Voltage - Output (Max)▲▼ | Voltage - Input (Max)▲▼ | Synchronous Rectifier▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS51363RVETBuck Switching Regulator IC Positive Adjustable (Programmable) 0.6V (1.05V, 1.2V, 1.35V, 1.5V) 1 Output 10A, 8A 28-VFQFN Exposed Pad | 28-VFQFN Exposed Pad | 28-VQFN-CLIP | 4.5 ul | 3.5 ul | Surface Mount | -10 °C | 85 °C | 1 ul | 8 A, 10 A | Buck | Adjustable (Programmable) | 3 V | Step-Down | Positive | 2 V | 22 V |
Key Features
• Input Voltage Range: 3 V to 22 VOutput Voltage Range: 0.6 V to 2 V8-A or 10-A Integrated FET ConverterFewest External ComponentsSoft-Start Time Programmable by External CapacitorSwitching Frequency: 400 kHz and 800 kHzD-CAP2™ Architecture to Enable POSCAP andAll MLCC Output Capacitor UsageIntegrated and Temperature Compensated Low-SideOn-Resistance Sensing for Accurate OCL ProtectionPowergood OutputOCL, OVP, UVP and UVLO ProtectionsThermal Shutdown (non-latch)Output Discharge FunctionIntegrated Boost MOSFET Switch28-Pin, 3.5-mm × 4.5-mm, RVE, QFN Packagewith 0.4-mm Pitch and 1-mm HeightInput Voltage Range: 3 V to 22 VOutput Voltage Range: 0.6 V to 2 V8-A or 10-A Integrated FET ConverterFewest External ComponentsSoft-Start Time Programmable by External CapacitorSwitching Frequency: 400 kHz and 800 kHzD-CAP2™ Architecture to Enable POSCAP andAll MLCC Output Capacitor UsageIntegrated and Temperature Compensated Low-SideOn-Resistance Sensing for Accurate OCL ProtectionPowergood OutputOCL, OVP, UVP and UVLO ProtectionsThermal Shutdown (non-latch)Output Discharge FunctionIntegrated Boost MOSFET Switch28-Pin, 3.5-mm × 4.5-mm, RVE, QFN Packagewith 0.4-mm Pitch and 1-mm Height
Description
AI
The TPS51363 is a high-voltage input, synchronous converter with integrated FET, based on D-CAP2 control topology, which enables fast transient response and supports both POSCAP and all MLCC output capacitors. TI proprietary FET technology combined with TI leading-edge package technology provides the highest density solution for single-output power rail such as VCCIO and VDDQ for DDR notebook memory, or any point-of-load (POL) in wide application.
The feature set includes switching frequency of 400 kHz and 800 kHz. Programmable soft-start time with an external capacitor. auto skip, pre-bias startup, integrated bootstrap switch, power good, enable and a full suite of fault protection schemes, including OCL, UVP, OVP, 5-V UVLO and thermal shutdown.
It is packaged in 3.5 mm × 4.5 mm, 0.4-mm pitch, 28-pin QFN (RVE), and specified from –10°C to 85°C.
The TPS51363 is a high-voltage input, synchronous converter with integrated FET, based on D-CAP2 control topology, which enables fast transient response and supports both POSCAP and all MLCC output capacitors. TI proprietary FET technology combined with TI leading-edge package technology provides the highest density solution for single-output power rail such as VCCIO and VDDQ for DDR notebook memory, or any point-of-load (POL) in wide application.
The feature set includes switching frequency of 400 kHz and 800 kHz. Programmable soft-start time with an external capacitor. auto skip, pre-bias startup, integrated bootstrap switch, power good, enable and a full suite of fault protection schemes, including OCL, UVP, OVP, 5-V UVLO and thermal shutdown.
It is packaged in 3.5 mm × 4.5 mm, 0.4-mm pitch, 28-pin QFN (RVE), and specified from –10°C to 85°C.