TPA3144 Series
6-W stereo, 12-W mono, 4.5- to 14.4-V, analog in Class-D audio amplifier w/ inductor free & AGL
Manufacturer: Texas Instruments
Catalog(1 parts)
| Part | Operating Temperature▲▼ | Operating Temperature▲▼ | Type | Supplier Device Package | Features | Package / Case | Max Output Power x Channels @ Load▲▼ | Output Type | Mounting Type |
|---|---|---|---|---|---|---|---|---|---|
85 °C | -40 °C | Class D | 28-HTSSOP | Depop, Short-Circuit and Thermal Protection | 28-PowerTSSOP | 2 ul, 6 W | 2-Channel (Stereo) | Surface Mount |
Key Features
• 2x6 W/ch into 4-Ω Loads at 10% THD+N from a 7-V Supply2x6 W/ch into 6-Ω Loads at 10% THD+N from a 9.5-V Supply2x6 W/ch into 8-Ω Loads at 10% THD+N from a 10-V SupplyUp to 90% Efficient Class-D Operation (8 Ω) Eliminates Need for Heat Sinks<0.05% THD+N at 1 W/4 Ω/1 kHz<65-µV A-wgt Output NoiseWide Supply Voltage Range Allows Operation SpeakerGuard™ speaker protection circuitry includes from 4.5 V to 14.4 VInductor-Free OperationEnhanced EMI Performance with Spread Spectrum and 1SPW OperationSpeakerGuard™ Speaker Protection Includes Automatic Gain Limit, Adjustable Power Limiter, and DC ProtectionRobust Pin-to-Pin, Pin-to-Ground, and Pin-to-Power Short Circuit Protection and Thermal ProtectionFour Selectable, Fixed Gain SettingsSingle Ended or Differential Analog InputsClick and Pop Free Startup2x6 W/ch into 4-Ω Loads at 10% THD+N from a 7-V Supply2x6 W/ch into 6-Ω Loads at 10% THD+N from a 9.5-V Supply2x6 W/ch into 8-Ω Loads at 10% THD+N from a 10-V SupplyUp to 90% Efficient Class-D Operation (8 Ω) Eliminates Need for Heat Sinks<0.05% THD+N at 1 W/4 Ω/1 kHz<65-µV A-wgt Output NoiseWide Supply Voltage Range Allows Operation SpeakerGuard™ speaker protection circuitry includes from 4.5 V to 14.4 VInductor-Free OperationEnhanced EMI Performance with Spread Spectrum and 1SPW OperationSpeakerGuard™ Speaker Protection Includes Automatic Gain Limit, Adjustable Power Limiter, and DC ProtectionRobust Pin-to-Pin, Pin-to-Ground, and Pin-to-Power Short Circuit Protection and Thermal ProtectionFour Selectable, Fixed Gain SettingsSingle Ended or Differential Analog InputsClick and Pop Free Startup
Description
AI
The TPA3144D2 is an efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers at up to 6 W, 6 Ω, or 8 Ω (per channel).
Advanced EMI Suppression Technology with Spread Spectrum Control and 1SPW modulation scheme enables the use of inexpensive ferrite bead filters at the outputs while meeting EMC requirements for system cost reduction. TPA3144D2 is not only fully protected against shorts and overload, the SpeakerGuard™ speaker protection circuitry includes an adjustable Automatic Gain Limit (AGL), an adjustable power limiter and a DC detection circuit for protection of the connected speakers. The AGL allows adjustment of the maximum output voltage without signal clipping for enhanced speaker protection and audio quality. The DC detect and Pin-to-Pin, Pin-to-Ground, and Pin-to-Power Short Circuit protection circuit protect the speakers from output DC and pin shorts caused in production. The outputs are also fully protected against shorts to GND, PVCC, and output-to-output. The short-circuit protection and thermal protection includes an auto recovery feature.
The TPA3144D2 can drive stereo speakers with as low as 4-Ω impedance. The high efficiency of the TPA3144D2, 90% with an 8-Ω load, eliminates the need for an external heat sink, and TPA3144D2 will be able to output full power on a 2-layer PCB.
The TPA3144D2 is an efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers at up to 6 W, 6 Ω, or 8 Ω (per channel).
Advanced EMI Suppression Technology with Spread Spectrum Control and 1SPW modulation scheme enables the use of inexpensive ferrite bead filters at the outputs while meeting EMC requirements for system cost reduction. TPA3144D2 is not only fully protected against shorts and overload, the SpeakerGuard™ speaker protection circuitry includes an adjustable Automatic Gain Limit (AGL), an adjustable power limiter and a DC detection circuit for protection of the connected speakers. The AGL allows adjustment of the maximum output voltage without signal clipping for enhanced speaker protection and audio quality. The DC detect and Pin-to-Pin, Pin-to-Ground, and Pin-to-Power Short Circuit protection circuit protect the speakers from output DC and pin shorts caused in production. The outputs are also fully protected against shorts to GND, PVCC, and output-to-output. The short-circuit protection and thermal protection includes an auto recovery feature.
The TPA3144D2 can drive stereo speakers with as low as 4-Ω impedance. The high efficiency of the TPA3144D2, 90% with an 8-Ω load, eliminates the need for an external heat sink, and TPA3144D2 will be able to output full power on a 2-layer PCB.