TPS60140 Series
Regulated 5-V Charge Pump Voltage Tripler With Low Battery Indicator
Manufacturer: Texas Instruments
Catalog(2 parts)
| Part | Synchronous Rectifier▲▼ | Output Configuration | Operating Temperature▲▼ | Operating Temperature▲▼ | Voltage - Output (Min/Fixed)▲▼ | Current - Output▲▼ | Supplier Device Package | Function | Voltage - Input (Min)▲▼ | Voltage - Input (Max)▲▼ | Package / Case▲▼ | Package / Case | Package / Case▲▼ | Number of Outputs▲▼ | Output Type▲▼ | Mounting Type | Frequency - Switching▲▼ | Main Purpose | Outputs and Type | Outputs and Type▲▼ | Supplied Contents | Utilized IC / Part | Voltage - Output▲▼ | Board Type | Regulator Topology | Voltage - Input▲▼ | Voltage - Input▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS60140PWPCharge Pump Switching Regulator IC Positive Fixed 5V 1 Output 100mA 20-PowerTSSOP (0.173", 4.40mm Width) | Positive | 85 °C | -40 °C | 5 V | 0.10000000149011612 A | 20-HTSSOP | Step-Up | 1.7999999523162842 V | 3.5999999046325684 V | 0.004394200164824724 m | 20-PowerTSSOP | 0.004399999976158142 m | 1 ul | 27.030000686645508 °C/W | Surface Mount | 320000 Hz | |||||||||||
0.10000000149011612 A | DC/DC, Step Up | Non-Isolated | 1 ul | Board(s) | TPS60140 | 5 V | Fully Populated | Boost | 3.5999999046325684 V | 1.7999999523162842 V |
Key Features
• Regulated 5 V ±4% Output VoltageUp to 100-mA Output Current1.8-V to 3.6-V Input Voltage Range65-µA Quiescent Supply Current0.05-µA Shutdown Current, Battery Is IsolatedFrom Load in ShutdownIntegrated Low-Battery or Power-Good IndicatorLow-Output Voltage Ripple Over Complete OutputCurrent RangeEasy-to-Design With Low-EMI Power SupplyBecause No Inductors Are RequiredEvaluation Module Available (TPS60140EVM-144)Available in a 6.5-mm × 4.4-mm 20-Pin HTSSOPPackageRegulated 5 V ±4% Output VoltageUp to 100-mA Output Current1.8-V to 3.6-V Input Voltage Range65-µA Quiescent Supply Current0.05-µA Shutdown Current, Battery Is IsolatedFrom Load in ShutdownIntegrated Low-Battery or Power-Good IndicatorLow-Output Voltage Ripple Over Complete OutputCurrent RangeEasy-to-Design With Low-EMI Power SupplyBecause No Inductors Are RequiredEvaluation Module Available (TPS60140EVM-144)Available in a 6.5-mm × 4.4-mm 20-Pin HTSSOPPackage
Description
AI
The TPS6014x step-up, regulated charge pumps generate a 5-V ±4% output voltage from a 1.8-V to 3.6-V input voltage range. The devices are typically powered by two alkaline, NiCd, or NiMH battery cells and provide an output current of minimum 100 mA from a 2-V input. Only four external capacitors are needed to build a complete voltage tripler charge pump.
The devices regulate the output by using the pulse-skip topology. The controller is optimized for lowest output voltage ripple over the complete output current range. The output peak current and therefore the output voltage ripple are drastically reduced compared to a conventional pulse-skip topology by regulating the charge pump output resistance. At light loads the maximum output resistance is limited to assure a low quiescent current.
The TPS60140 includes a low-battery comparator that issues a warning if the battery voltage drops below a user-adjustable threshold voltage. The TPS60141 features a power-good output that goes active when the output voltage reaches 90% of its nominal value.
The logic shutdown function disables the converter, reduces the supply current to a maximum of 1 µA and disconnects the output from the input. Special current-control circuitry prevents excessive current from being drawn from the battery during start-up. This DC/DC converter requires no inductors, therefore, EMI is of little concern. The TPS6014x operates over a free-air temperature range of –40°C to 85°C. It is available in the small, thermally enhanced 20-pin HTSSOP package (PWP).
The TPS6014x step-up, regulated charge pumps generate a 5-V ±4% output voltage from a 1.8-V to 3.6-V input voltage range. The devices are typically powered by two alkaline, NiCd, or NiMH battery cells and provide an output current of minimum 100 mA from a 2-V input. Only four external capacitors are needed to build a complete voltage tripler charge pump.
The devices regulate the output by using the pulse-skip topology. The controller is optimized for lowest output voltage ripple over the complete output current range. The output peak current and therefore the output voltage ripple are drastically reduced compared to a conventional pulse-skip topology by regulating the charge pump output resistance. At light loads the maximum output resistance is limited to assure a low quiescent current.
The TPS60140 includes a low-battery comparator that issues a warning if the battery voltage drops below a user-adjustable threshold voltage. The TPS60141 features a power-good output that goes active when the output voltage reaches 90% of its nominal value.
The logic shutdown function disables the converter, reduces the supply current to a maximum of 1 µA and disconnects the output from the input. Special current-control circuitry prevents excessive current from being drawn from the battery during start-up. This DC/DC converter requires no inductors, therefore, EMI is of little concern. The TPS6014x operates over a free-air temperature range of –40°C to 85°C. It is available in the small, thermally enhanced 20-pin HTSSOP package (PWP).