LP38842-ADJ Series
1.5-A, low-VIN (0.675-V), adjustable ultra-low-dropout voltage regulator with enable
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
1.5-A, low-VIN (0.675-V), adjustable ultra-low-dropout voltage regulator with enable
| Part | Voltage - Input (Max) [Max] | Protection Features | Voltage - Output (Max) [Max] | Number of Regulators | Output Type | Current - Supply (Max) [Max] | Package / Case [custom] | Package / Case | Package / Case [custom] | Voltage - Output (Min/Fixed) | Operating Temperature [Max] | Operating Temperature [Min] | Supplier Device Package | Control Features | Voltage Dropout (Max) | Current - Quiescent (Iq) | Output Configuration | PSRR [Max] | PSRR [Min] | Current - Output | Mounting Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments LP38842MRX-ADJ/NOPB | 5.5 V | Over Current, Over Temperature, Short Circuit | 1.5 V | 1 | Adjustable | 40 mA | 3.9 mm | 8-PowerSOIC | 0.154 in | 0.56 V | 125 °C | -40 °C | 8-SO PowerPad | Enable | 0.115 V | 30 µA | Positive | 80 dB | 58 dB | 1.5 A | Surface Mount |
Texas Instruments LP38842MR-ADJ/NOPB | 5.5 V | Over Current, Over Temperature, Short Circuit | 1.5 V | 1 | Adjustable | 40 mA | 3.9 mm | 8-PowerSOIC | 0.154 in | 0.56 V | 125 °C | -40 °C | 8-SO PowerPad | Enable | 0.115 V | 30 µA | Positive | 80 dB | 58 dB | 1.5 A | Surface Mount |
Key Features
• Ideal for Conversion From 1.8V or 1.5V InputsDesigned for Use With Low ESR Ceramic CapacitorsUltra Low Dropout Voltage (115mV at 1.5A typ)0.56V to 1.5V Adjustable Output RangeLoad Regulation of 0.1%/A (typ)30nA Quiescent Current in Shutdown (typ)Low Ground Pin Current at all LoadsOver Temperature/Over Current ProtectionAvailable in 8 Lead SO PowerPAD Package−40°C to +125°C Junction Temperature RangeUVLO Disables Output When VBIAS< 3.8VAll trademarks are the property of their respective owners.Ideal for Conversion From 1.8V or 1.5V InputsDesigned for Use With Low ESR Ceramic CapacitorsUltra Low Dropout Voltage (115mV at 1.5A typ)0.56V to 1.5V Adjustable Output RangeLoad Regulation of 0.1%/A (typ)30nA Quiescent Current in Shutdown (typ)Low Ground Pin Current at all LoadsOver Temperature/Over Current ProtectionAvailable in 8 Lead SO PowerPAD Package−40°C to +125°C Junction Temperature RangeUVLO Disables Output When VBIAS< 3.8VAll trademarks are the property of their respective owners.
Description
AI
The LP38842-ADJ is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in the SO PowerPAD package.
Dropout Voltage:115 mV (typ) at 1.5A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) when S/D pin is low.
Precision Reference Voltage:1.5% room temperature accuracy.
The LP38842-ADJ is a high current, fast response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in the SO PowerPAD package.
Dropout Voltage:115 mV (typ) at 1.5A load current.
Quiescent Current:30 mA (typ) at full load.
Shutdown Current:30 nA (typ) when S/D pin is low.
Precision Reference Voltage:1.5% room temperature accuracy.