Catalog(4 parts)
| Part | Operating Temperature▲▼ | Operating Temperature▲▼ | Number of Drivers/Receivers▲▼ | Number of Drivers/Receivers▲▼ | Supplier Device Package | Type | Voltage - Supply▲▼ | Voltage - Supply▲▼ | Package / Case | Package / Case▲▼ | Mounting Type | Protocol |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
70 °C | 0 °C | 0 ul | 4 ul | 16-SOIC | Driver | 4.75 V | 5.25 V | 16-SOIC | 0.003911599982529879 m, 3.900000095367432 ul | Surface Mount | RS422, RS485 | |
70 °C | 0 °C | 0 ul | 4 ul | 16-SO | Driver | 4.75 V | 5.25 V | 16-SOIC (0.209", 5.30mm Width) | Surface Mount | RS422, RS485 | ||
70 °C | 0 °C | 0 ul | 4 ul | 16-SOIC | Driver | 4.75 V | 5.25 V | 16-SOIC | 0.003911599982529879 m, 3.900000095367432 ul | Surface Mount | RS422, RS485 | |
70 °C | 0 °C | 0 ul | 4 ul | 16-PDIP | Driver | 4.75 V | 5.25 V | 16-DIP | 0.007619999814778566 m, 0.007619999814778566 m | Through Hole | RS422, RS485 |
Key Features
• Meets or Exceeds the Requirements of ANSI Standard EIA/TIA-422-B and ITU Recommendation V.11Designed to Operate up to 20 Mbaud3-State TTL CompatibleSingle 5V Supply OperationHigh Output Impedance in Power-Off ConditionComplementary Output-Enable InputsImproved Replacement for the AM26LS31Meets or Exceeds the Requirements of ANSI Standard EIA/TIA-422-B and ITU Recommendation V.11Designed to Operate up to 20 Mbaud3-State TTL CompatibleSingle 5V Supply OperationHigh Output Impedance in Power-Off ConditionComplementary Output-Enable InputsImproved Replacement for the AM26LS31
Description
AI
The four differential line drivers are designed for data transmission over twisted-pair or parallel-wire transmission lines. They meet the requirements of ANSI Standard EIA/TIA-422-B and ITU Recommendations V.11 and are compatible with 3-state TTL circuits. Advanced low-power Schottky technology provides high speed without the usual power penalties. Standby supply current is typically only 26mA, while typical propagation delay time is less than 10ns.
High-impedance inputs maintain low input currents, less than µA for a high level and less than 100µA for a low level. Complementary output-enable inputs (G and G) allow these devices to be enabled at either a high input level or low input level. The SN75ALS192 is capable of data rates in excess of 20 Mbit/s and is designed to operate with the SN75ALS193 quadruple line receiver.
The SN75ALS192 is characterized for operation from 0°C to 70°C.
The four differential line drivers are designed for data transmission over twisted-pair or parallel-wire transmission lines. They meet the requirements of ANSI Standard EIA/TIA-422-B and ITU Recommendations V.11 and are compatible with 3-state TTL circuits. Advanced low-power Schottky technology provides high speed without the usual power penalties. Standby supply current is typically only 26mA, while typical propagation delay time is less than 10ns.
High-impedance inputs maintain low input currents, less than µA for a high level and less than 100µA for a low level. Complementary output-enable inputs (G and G) allow these devices to be enabled at either a high input level or low input level. The SN75ALS192 is capable of data rates in excess of 20 Mbit/s and is designed to operate with the SN75ALS193 quadruple line receiver.
The SN75ALS192 is characterized for operation from 0°C to 70°C.