TUSB216 Series
USB 2.0 high speed signal conditioner with DCP and CDP controllers
Manufacturer: Texas Instruments
Catalog(1 parts)
| Part | Supplier Device Package | Package / Case | Mounting Type | Number of Channels▲▼ | Capacitance - Input▲▼ | Applications | Signal Conditioning | Data Rate (Max)▲▼ | Type | Operating Temperature▲▼ | Operating Temperature▲▼ | Voltage - Supply▲▼ | Voltage - Supply▲▼ | Current - Supply▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
12-X2QFN (1.6x1.6) | 12-XFQFN | Surface Mount | 3 ul | 2.499999990010493e-12 F | USB | Input Equalization | 503316480 bit/s | ReDriver | 70 °C | 0 °C | 2.299999952316284 V | 6.5 V | 0.02199999988079071 A |
Key Features
• Wide supply voltage range: 2.3 – 6.5 VUltra-low USB disconnect and shutdown power consumptionProvides USB 2.0 high-speed signal conditioningCompatible with USB 2.0, OTG 2.0 and BC 1.2Support for low-speed, full-speed, high-speed signalingIntegrated BC 1.2 CDP battery charging controllerHost or device agnosticSupports up to 5-m cable lengthFour selectable signal boost (edge boost along with DC boost) settings through the external pull-down resistor valuesThree selectable RX sensitivity settings through the pull-up-or-down to compensate ISI jitter for high-loss applicationsSupports up to 10-m cable length with two TUSB216 devicesScalable solution – devices can be daisy chained for high loss applicationsPin compatible with TUSB211A, 212, 214, and 217A (3.3 V)Wide supply voltage range: 2.3 – 6.5 VUltra-low USB disconnect and shutdown power consumptionProvides USB 2.0 high-speed signal conditioningCompatible with USB 2.0, OTG 2.0 and BC 1.2Support for low-speed, full-speed, high-speed signalingIntegrated BC 1.2 CDP battery charging controllerHost or device agnosticSupports up to 5-m cable lengthFour selectable signal boost (edge boost along with DC boost) settings through the external pull-down resistor valuesThree selectable RX sensitivity settings through the pull-up-or-down to compensate ISI jitter for high-loss applicationsSupports up to 10-m cable length with two TUSB216 devicesScalable solution – devices can be daisy chained for high loss applicationsPin compatible with TUSB211A, 212, 214, and 217A (3.3 V)
Description
AI
The TUSB216 is a third-generation USB 2.0 high-speed signal conditioner designed to compensate both AC loss (due to capacitive load) and DC loss (due to resistive loss) in the transmission channel.
The TUSB216 leverages a patented design to speed-up transition edges of USB 2.0 high-speed signal with an edge booster and increases static levels with a DC boost function.
In addition, the TUSB216 includes a pre-equalization function to improve the receiver sensitivity and compensate the inter-symbol interference (ISI) jitter in application with longer cable length. USB low-speed and full-speed signal characteristics are unaffected by the TUSB216.
The TUSB216 improves signal quality without altering packet timing or adding propagation delay or latency.
The TUSB216 helps a system to pass the USB 2.0 high-speed near end eye compliance with a cable as long as 5 meters.
The TUSB216 is compatible with the USB On-The-Go (OTG) and battery charging (BC 1.2) protocols. The Integrated BC 1.2 battery charging controller can be enabled through a control pin.
The TUSB216 is a third-generation USB 2.0 high-speed signal conditioner designed to compensate both AC loss (due to capacitive load) and DC loss (due to resistive loss) in the transmission channel.
The TUSB216 leverages a patented design to speed-up transition edges of USB 2.0 high-speed signal with an edge booster and increases static levels with a DC boost function.
In addition, the TUSB216 includes a pre-equalization function to improve the receiver sensitivity and compensate the inter-symbol interference (ISI) jitter in application with longer cable length. USB low-speed and full-speed signal characteristics are unaffected by the TUSB216.
The TUSB216 improves signal quality without altering packet timing or adding propagation delay or latency.
The TUSB216 helps a system to pass the USB 2.0 high-speed near end eye compliance with a cable as long as 5 meters.
The TUSB216 is compatible with the USB On-The-Go (OTG) and battery charging (BC 1.2) protocols. The Integrated BC 1.2 battery charging controller can be enabled through a control pin.