TPS7A4501 Series
Radiation-hardened, QMLV, 1.5-V to 20-V input 1.5-A low-dropout (LDO) regulator
Manufacturer: Texas Instruments
Catalog(5 parts)
| Part | Current - Output▲▼ | Mounting Type | Output Configuration | Voltage - Input (Max)▲▼ | Output Type | Number of Regulators▲▼ | PSRR▲▼ | Protection Features | Operating Temperature▲▼ | Operating Temperature▲▼ | Voltage Dropout (Max)▲▼ | Supplier Device Package | Package / Case | Current - Quiescent (Iq)▲▼ | Voltage - Output (Min/Fixed)▲▼ | Voltage - Output (Max)▲▼ | Control Features | Operating Temperature▲▼ | Voltage Dropout (Max)▲▼ | Regulator Type | Supplied Contents | Board Type | Utilized IC / Part | Voltage - Output▲▼ | Voltage - Output▲▼ | Voltage - Input▲▼ | Voltage - Input▲▼ | Channels per IC▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS7A4501DCQTLinear Voltage Regulator IC Positive Adjustable 1 Output 1.5A SOT-223-6 | 1.5 A | Surface Mount | Positive | 20 V | Adjustable | 1 ul | 68 ul | Over Current, Over Temperature, Reverse Polarity | 125 °C | -40 °C | 0.44999998807907104 V | SOT-223-6 | SOT-223-6 | 0.001500000013038516 A | 1.2100000381469729 V | 20 V | Enable | |||||||||||
0.75 A | Surface Mount | Positive | 20 V | Adjustable | 1 ul | 68 ul | Over Current, Over Temperature, Reverse Polarity | 10-CFP | 10-CDFF | 0.001500000013038516 A | 1.2100000381469729 V | 20 V | Enable | 25 °C | 0.33000001311302185 V | |||||||||||||
Texas Instruments TPS7A4501EVM-385TPS7A4501 1 - Single Channels per IC Positive Adjustable Linear Voltage Regulator Evaluation Board | 1.5 A | Positive Adjustable | Board(s) | Fully Populated | TPS7A4501 | 1.2100000381469729 V | 20 V | 20 V | 2.0999999046325684 V | 1 ul | ||||||||||||||||||
Texas Instruments TPS7A4501KTTRLinear Voltage Regulator IC Positive Adjustable 1 Output 1.5A TO-263 (DDPAK-5) | 1.5 A | Surface Mount | Positive | 20 V | Adjustable | 1 ul | 68 ul | Over Current, Over Temperature, Reverse Polarity | 125 °C | -40 °C | 0.44999998807907104 V | TO-263 (DDPAK-5) | D2PAK (5 Leads + Tab), TO-263-6, TO-263BA | 0.001500000013038516 A | 1.2100000381469729 V | 20 V | Enable | |||||||||||
Texas Instruments TPS7A4501DCQRLinear Voltage Regulator IC Positive Adjustable 1 Output 1.5A SOT-223-6 | 1.5 A | Surface Mount | Positive | 20 V | Adjustable | 1 ul | 68 ul | Over Current, Over Temperature, Reverse Polarity | 125 °C | -40 °C | 0.44999998807907104 V | SOT-223-6 | SOT-223-6 | 0.001500000013038516 A | 1.2100000381469729 V | 20 V | Enable |
Key Features
• QMLV Qualified SMD 5962-12224Adjustable Output from 1.21 to 20 VOptimized for Fast-Transient ResponseHigh Output Voltage Accuracy: 1.15% at 25°C (Typical)Dropout Voltage: 200 mV With ILOAD= 750 mA (Typical)Low Noise: 50 µVRMS(10 Hz to 100 kHz) for VOUT= 5 VHigh Ripple Rejection: 68 dB at 1 kHz1-mA Quiescent CurrentNo Protection Diodes NeededStable With Ceramic Output CapacitorReverse-Battery ProtectionReverse Current Protection5962-1222402VHA:Wide Vin 2.3 to 20 VOutput Current: 750 mA5962R1222403VXC:Wide Vin 2.9 to 20 VOutput Current: 1.5 AThermally-Enhanced HKU PackageRadiation Hardness Assurance (RHA) up to Total Ionizing Dose (TID) 100 krad (Si)Exhibits Low Dose Rate Sensitivity But Remains Within the Pre-Radiation Electrical Limits at 100 krad Total Dose Level, as Allowed by MIL-STD-883, TM1019QMLV Qualified SMD 5962-12224Adjustable Output from 1.21 to 20 VOptimized for Fast-Transient ResponseHigh Output Voltage Accuracy: 1.15% at 25°C (Typical)Dropout Voltage: 200 mV With ILOAD= 750 mA (Typical)Low Noise: 50 µVRMS(10 Hz to 100 kHz) for VOUT= 5 VHigh Ripple Rejection: 68 dB at 1 kHz1-mA Quiescent CurrentNo Protection Diodes NeededStable With Ceramic Output CapacitorReverse-Battery ProtectionReverse Current Protection5962-1222402VHA:Wide Vin 2.3 to 20 VOutput Current: 750 mA5962R1222403VXC:Wide Vin 2.9 to 20 VOutput Current: 1.5 AThermally-Enhanced HKU PackageRadiation Hardness Assurance (RHA) up to Total Ionizing Dose (TID) 100 krad (Si)Exhibits Low Dose Rate Sensitivity But Remains Within the Pre-Radiation Electrical Limits at 100 krad Total Dose Level, as Allowed by MIL-STD-883, TM1019
Description
AI
The TPS7A4501-SP is a low-dropout (LDO) regulator optimized for fast-transient response. The 5962-1222402VHA can supply 750 mA of output current with a dropout voltage of 300 mV. The 5962R1222403VXC can supply 1.5 A of output current with a dropout voltage of 320 mV. Quiescent current is well controlled; it does not rise in dropout, as with many other regulators. In addition to fast transient response, the TPS7A4501-SP regulator has very-low output noise, which makes it ideal for sensitive RF supply applications.
Output voltage range is from 1.21 to 20 V. The TPS7A4501-SP is stable with output capacitance as low as 10 µF. Small ceramic capacitors can be used without the necessary addition of ESR, as is common with other regulators. Internal protection circuitry includes reverse-battery protection, current limiting, thermal limiting, and reverse-current protection. The device is available as an adjustable device with a 1.21-V reference voltage. The 5962-1222402VHA is available in 10-pin CFP (U) package and 5962R1222403VXC is available in thermally-enhanced 10-pin CFP (HKU) package. Known good die (KGD) option is available for both 5962-1222402V9A for non-RHA version and 5962R1222403V9A for RHA.
The TPS7A4501-SP is a low-dropout (LDO) regulator optimized for fast-transient response. The 5962-1222402VHA can supply 750 mA of output current with a dropout voltage of 300 mV. The 5962R1222403VXC can supply 1.5 A of output current with a dropout voltage of 320 mV. Quiescent current is well controlled; it does not rise in dropout, as with many other regulators. In addition to fast transient response, the TPS7A4501-SP regulator has very-low output noise, which makes it ideal for sensitive RF supply applications.
Output voltage range is from 1.21 to 20 V. The TPS7A4501-SP is stable with output capacitance as low as 10 µF. Small ceramic capacitors can be used without the necessary addition of ESR, as is common with other regulators. Internal protection circuitry includes reverse-battery protection, current limiting, thermal limiting, and reverse-current protection. The device is available as an adjustable device with a 1.21-V reference voltage. The 5962-1222402VHA is available in 10-pin CFP (U) package and 5962R1222403VXC is available in thermally-enhanced 10-pin CFP (HKU) package. Known good die (KGD) option is available for both 5962-1222402V9A for non-RHA version and 5962R1222403V9A for RHA.