PTH03000W Series

6 A, 3.3-V Input Wide-Output Adjust Plug-in Power Module

Catalog

6 A, 3.3-V Input Wide-Output Adjust Plug-in Power Module

Part	Package / Case	Number of Outputs	Operating Temperature (Min)	Operating Temperature (Max)	Efficiency	Size / Dimension Width	Size / Dimension Length	Size / Dimension Height	Voltage - Input (Max)	Voltage - Output 1 (Min)	Voltage - Output 1 (Max)	Mounting Type	Applications	Current - Output (Max)	Voltage - Input (Min)	Type
Texas Instruments PTH03000WAS	5-SMD Module	1	-40 °C	85 °C	93 %	0.5 in	0.75 in	0.36 in	3.6 V	0.9 V	2.5 V	Surface Mount	ITE (Commercial)	6 A	3 V	Non-Isolated PoL Module
Texas Instruments PTH03000WAZ	5-SMD Module	1	-40 °C	85 °C	93 %	0.5 in	0.75 in	0.36 in	3.6 V	0.9 V	2.5 V	Surface Mount	ITE (Commercial)	6 A	3 V	Non-Isolated PoL Module
Texas Instruments PTH03000WAZT	5-SMD Module	1	-40 °C	85 °C	93 %	0.5 in	0.75 in	0.36 in	3.6 V	0.9 V	2.5 V	Surface Mount	ITE (Commercial)	6 A	3 V	Non-Isolated PoL Module
Texas Instruments PTH03000WAST	5-SMD Module	1	-40 °C	85 °C	93 %	0.5 in	0.75 in	0.36 in	3.6 V	0.9 V	2.5 V	Surface Mount	ITE (Commercial)	6 A	3 V	Non-Isolated PoL Module
Texas Instruments PTH03000WAH	5-DIP Module	1	-40 °C	85 °C	93 %	0.5 in	0.75 in	0.34 in	3.6 V	0.9 V	2.5 V	Through Hole	ITE (Commercial)	6 A	3 V	Non-Isolated PoL Module
Texas Instruments PTH03000WAD	5-DIP Module	1	-40 °C	85 °C	93 %	0.5 in	0.75 in	0.34 in	3.6 V	0.9 V	2.5 V	Through Hole	ITE (Commercial)	6 A	3 V	Non-Isolated PoL Module

Catalog

6 A, 3.3-V Input Wide-Output Adjust Plug-in Power Module

Description

The PTH03000 series of non-isolated power modules are small in size and high on performance. Using double-sided surface mount construction and synchronous rectification technology, these regulators deliver up to 6 A of output current while occupying a PCB area of about half the size of a standard postage stamp. They are an ideal choice for applications where space, performance and cost are important design constraints. This series operates from an input voltage of 3.3-V to provide step-down power conversion to any output voltage over the range, 0.9 V to 2.5 V. The output voltage of the PTH03000W is set within this range using a single resistor. Operating features include an on/off inhibit, output voltage adjust (trim), an output current limit, and over-temperature protection. Target applications include telecom, industrial, and general purpose circuits, including low-power dual-voltage systems that use a DSP, microprocessor, or ASIC. Package options include both through-hole and surface mount configurations. The PTH03000 series of non-isolated power modules are small in size and high on performance. Using double-sided surface mount construction and synchronous rectification technology, these regulators deliver up to 6 A of output current while occupying a PCB area of about half the size of a standard postage stamp. They are an ideal choice for applications where space, performance and cost are important design constraints. This series operates from an input voltage of 3.3-V to provide step-down power conversion to any output voltage over the range, 0.9 V to 2.5 V. The output voltage of the PTH03000W is set within this range using a single resistor. Operating features include an on/off inhibit, output voltage adjust (trim), an output current limit, and over-temperature protection. Target applications include telecom, industrial, and general purpose circuits, including low-power dual-voltage systems that use a DSP, microprocessor, or ASIC. Package options include both through-hole and surface mount configurations.