Catalog
Low power and high performance wireless transceiver
Key Features
• RF Performance and Analog Features:High-Performance, Single-Chip TransceiverExcellent Receiver Sensitivity:–120 dBm at 1.2 kbps–109 dBm at 50 kbpsBlocking Performance: 85 dB at 10 MHzAdjacent Channel Selectivity: Up to 62 dB at 50-kHz OffsetVery Low Phase Noise: –114 dBc/Hz at10-kHz Offset (169 MHz)Programmable Output Power Up to +16 dBm With 0.4-dB Step SizeAutomatic Output Power RampingSupported Modulation Formats:2-FSK, 2-GFSK, 4-FSK, 4-GFSK, MSK, OOKSupports Data Rate Up to 1.25 Mbps in Transmit and ReceiveLow Current Consumption:Enhanced Wake-On-Radio (eWOR) Functionality for Automatic Low-Power Receive PollingPower Down: 0.12 μA (0.5 μA With eWOR Timer Active)RX: 0.5 mA in RX Sniff ModeRX: 19 mA Peak Current in Low-Power ModeRX: 23 mA Peak Current in High-Performance ModeTX: 46 mA at +14 dBmOther:Data FIFOs: Separate 128-Byte RX and TXSupport for Seamless Integration With the CC1190 Device for Increased Range Providing up to 3-dB Improvement in RX Sensitivity and up to +27 dBm TX Output PowerDigital Features:WaveMatch: Advanced Digital Signal Processing for Improved Sync Detect PerformanceAutonomous Image RemovalSecurity: Hardware AES128 AcceleratorData FIFOs: Separate 128-Byte RX and TXIncludes Functions for Antenna Diversity SupportSupport for RetransmissionSupport for Auto-Acknowledge of Received PacketsAutomatic Clear Channel Assessment (CCA) for Listen-Before-Talk (LBT) SystemsBuilt-in Coding Gain Support for Increased Range and RobustnessDigital RSSI MeasurementImproved OOK Shaping for Less Occupied Bandwidth, Enabling Higher Output Power While Meeting Regulatory RequirementsDedicated Packet Handling for 802.15.4g:CRC 16/32FEC, Dual Sync Detection (FEC and non-FEC Packets)WhiteningGeneral:RoHS-Compliant 5-mm × 5-mm No-Lead QFN 32-Pin Package (RHB)Pin-Compatible With the CC1120 DeviceRegulations – Suitable for Systems Targeting Compliance With:Europe: ETSI EN 300 220US: FCC CFR47 Part 15Japan:ARIB STD-T108RF Performance and Analog Features:High-Performance, Single-Chip TransceiverExcellent Receiver Sensitivity:–120 dBm at 1.2 kbps–109 dBm at 50 kbpsBlocking Performance: 85 dB at 10 MHzAdjacent Channel Selectivity: Up to 62 dB at 50-kHz OffsetVery Low Phase Noise: –114 dBc/Hz at10-kHz Offset (169 MHz)Programmable Output Power Up to +16 dBm With 0.4-dB Step SizeAutomatic Output Power RampingSupported Modulation Formats:2-FSK, 2-GFSK, 4-FSK, 4-GFSK, MSK, OOKSupports Data Rate Up to 1.25 Mbps in Transmit and ReceiveLow Current Consumption:Enhanced Wake-On-Radio (eWOR) Functionality for Automatic Low-Power Receive PollingPower Down: 0.12 μA (0.5 μA With eWOR Timer Active)RX: 0.5 mA in RX Sniff ModeRX: 19 mA Peak Current in Low-Power ModeRX: 23 mA Peak Current in High-Performance ModeTX: 46 mA at +14 dBmOther:Data FIFOs: Separate 128-Byte RX and TXSupport for Seamless Integration With the CC1190 Device for Increased Range Providing up to 3-dB Improvement in RX Sensitivity and up to +27 dBm TX Output PowerDigital Features:WaveMatch: Advanced Digital Signal Processing for Improved Sync Detect PerformanceAutonomous Image RemovalSecurity: Hardware AES128 AcceleratorData FIFOs: Separate 128-Byte RX and TXIncludes Functions for Antenna Diversity SupportSupport for RetransmissionSupport for Auto-Acknowledge of Received PacketsAutomatic Clear Channel Assessment (CCA) for Listen-Before-Talk (LBT) SystemsBuilt-in Coding Gain Support for Increased Range and RobustnessDigital RSSI MeasurementImproved OOK Shaping for Less Occupied Bandwidth, Enabling Higher Output Power While Meeting Regulatory RequirementsDedicated Packet Handling for 802.15.4g:CRC 16/32FEC, Dual Sync Detection (FEC and non-FEC Packets)WhiteningGeneral:RoHS-Compliant 5-mm × 5-mm No-Lead QFN 32-Pin Package (RHB)Pin-Compatible With the CC1120 DeviceRegulations – Suitable for Systems Targeting Compliance With:Europe: ETSI EN 300 220US: FCC CFR47 Part 15Japan:ARIB STD-T108
Description
AI
The CC1201 device is a fully integrated single-chip radio transceiver designed for high performance at very low-power and low-voltage operation in cost-effective wireless systems. All filters are integrated, thus removing the need for costly external SAW and IF filters. The device is mainly intended for the ISM (Industrial, Scientific, and Medical) and SRD (Short Range Device) frequency bands at 164–190 MHz, 410–475 MHz, and 820–950 MHz.
The CC1201 device provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and Wake-On-Radio. The main operating parameters of the CC1201 device can be controlled through an SPI interface. In a typical system, the CC1201 device will be used with a microcontroller and only few external passive components.
The CC1201 offers the same performance as the CC1200 for channel filter bandwidths of 50 kHz or more, and therefore presents a lower cost option for applications that do not require narrowband support.
The CC1201 device is a fully integrated single-chip radio transceiver designed for high performance at very low-power and low-voltage operation in cost-effective wireless systems. All filters are integrated, thus removing the need for costly external SAW and IF filters. The device is mainly intended for the ISM (Industrial, Scientific, and Medical) and SRD (Short Range Device) frequency bands at 164–190 MHz, 410–475 MHz, and 820–950 MHz.
The CC1201 device provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and Wake-On-Radio. The main operating parameters of the CC1201 device can be controlled through an SPI interface. In a typical system, the CC1201 device will be used with a microcontroller and only few external passive components.
The CC1201 offers the same performance as the CC1200 for channel filter bandwidths of 50 kHz or more, and therefore presents a lower cost option for applications that do not require narrowband support.