TLIN10283 Series
Automotive local interconnect network (LIN) Transceiver with integrated voltage regulator
Manufacturer: Texas Instruments
Link to Manufacturer Page: https://www.ti.com/
Catalog
Automotive local interconnect network (LIN) Transceiver with integrated voltage regulator
| Part | Operating Temperature [Min] | Operating Temperature [Max] | Mounting Type | Qualification | Supplier Device Package | Receiver Hysteresis | Voltage - Supply [Min] | Voltage - Supply [Max] | Package / Case | Package / Case | Grade | Data Rate | Protocol | Type | Duplex | Package / Case [custom] | Package / Case [custom] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TLIN10283SDRQ1 | -40 °C | 125 °C | Surface Mount | AEC-Q100 | 8-SOIC | 500 mV | 5.5 V | 36 VDC | 3.9 mm | 8-SOIC | Automotive | 100 Kbps | LIN | Transceiver | |||
Texas Instruments TLIN10283DRBRQ1 | -40 °C | 125 °C | Surface Mount, Wettable Flank | AEC-Q100 | 8-SON (3x3) | 500 mV | 8-VDFN Exposed Pad | Automotive | 100 Kbps | LIN | Transceiver | ||||||
Texas Instruments TLIN10283DDARQ1 | -40 °C | 125 °C | Surface Mount | AEC-Q100 | 8-SO PowerPad | 500 mV | 8-PowerSOIC | Automotive | 100 Kbps | LIN | Transceiver | Half | 3.9 mm | 0.154 in | |||
Texas Instruments TLIN10283DRQ1 | -40 °C | 125 °C | Surface Mount | AEC-Q100 | 8-SOIC | 500 mV | 3.9 mm | 8-SOIC | Automotive | 100 Kbps | LIN | Transceiver |
Key Features
• AEC-Q100 (Grade 1) : Qualified for automotive applicationsLocal interconnect network (LIN) physical layer specification ISO/DIS 17987–4 compliant and conforms to SAE J2602 recommended practice for LIN (SeeSLLA495)Functional Safety-CapableDocumentation available to aid functional safety system designSupports 12-V applicationsWide operating ranges±58 V LIN bus fault protectionLDO output supporting 3.3 V or 5 VSleep mode: Ultra-low current consumption allows wake-up event from:LIN bus or local wake through EN pinPower-up and down glitch-free operationProtection features:ESD protection, VSUPunder-voltage protectionTXD dominant time out (DTO) protection, Thermal shutdownUnpowered node or ground disconnection fail-safe at system levelVCCsources up to 70 mAAvailable in SOIC (8) packageAEC-Q100 (Grade 1) : Qualified for automotive applicationsLocal interconnect network (LIN) physical layer specification ISO/DIS 17987–4 compliant and conforms to SAE J2602 recommended practice for LIN (SeeSLLA495)Functional Safety-CapableDocumentation available to aid functional safety system designSupports 12-V applicationsWide operating ranges±58 V LIN bus fault protectionLDO output supporting 3.3 V or 5 VSleep mode: Ultra-low current consumption allows wake-up event from:LIN bus or local wake through EN pinPower-up and down glitch-free operationProtection features:ESD protection, VSUPunder-voltage protectionTXD dominant time out (DTO) protection, Thermal shutdownUnpowered node or ground disconnection fail-safe at system levelVCCsources up to 70 mAAvailable in SOIC (8) package
Description
AI
The TLIN1028S-Q1 is a local interconnect network (LIN) physical layer transceiver, compliant to LIN 2.2A ISO/DIS 17987–4 standards, with an integrated low dropout (LDO) voltage regulator.
LIN is a single-wire bidirectional bus typically used for low speed in-vehicle networks using data rates up to 20 kbps. The LIN receiver supports data rates up to 100 kbps for end-of-line programming. The TLIN1028S-Q1 converts the LIN protocol data stream on the TXD input into a LIN bus signal. The receiver converts the data stream to logic-level signals that are sent to the microprocessor through the open-drain RXD pin. The TLIN1028S-Q1 reduces system complexity by providing a 3.3 V or 5 V rail with up to 70 mA of current to power microprocessors, sensors or other devices. The TLIN1028S-Q1 has an optimized current-limited wave-shaping driver which reduces electromagnetic emissions (EME).
The TLIN1028S-Q1 is a local interconnect network (LIN) physical layer transceiver, compliant to LIN 2.2A ISO/DIS 17987–4 standards, with an integrated low dropout (LDO) voltage regulator.
LIN is a single-wire bidirectional bus typically used for low speed in-vehicle networks using data rates up to 20 kbps. The LIN receiver supports data rates up to 100 kbps for end-of-line programming. The TLIN1028S-Q1 converts the LIN protocol data stream on the TXD input into a LIN bus signal. The receiver converts the data stream to logic-level signals that are sent to the microprocessor through the open-drain RXD pin. The TLIN1028S-Q1 reduces system complexity by providing a 3.3 V or 5 V rail with up to 70 mA of current to power microprocessors, sensors or other devices. The TLIN1028S-Q1 has an optimized current-limited wave-shaping driver which reduces electromagnetic emissions (EME).