TPS65086100 Series
User programmable 3 converter, 3 controller, 4 LDO, & 3 load switch Power Management IC (PMIC)
Manufacturer: Texas Instruments
Catalog(1 parts)
| Part | Package / Case | Mounting Type | Supplier Device Package▲▼ | Supplier Device Package▲▼ | Supplier Device Package | Operating Temperature▲▼ | Operating Temperature▲▼ | Voltage - Output | Voltage - Input▲▼ | Voltage - Input▲▼ | Applications | Number of Outputs▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments TPS65086100RSKTD-CAP2™ Controller, Multicore, CPU, FPGA, SOC’s Voltage Regulator IC 13 Output 64-VQFN (8x8) | 64-VFQFN Exposed Pad | Surface Mount | 8 ul | 8 ul | 64-VQFN | -40 °C | 85 °C | Multiple | 5.599999904632568 V | 21 V | Controller, CPU, FPGA, Multicore, SOC’s | 13 ul |
Key Features
• Two banks of one-time programmable memory for programming default voltages and sequenceWide VIN range from 5.6V to 21VThree variable-output voltage synchronous step-down controllers with D-CAP2™ TopologyScalable output current using external fets with selectable current limitI2C DVS control from 0.41V to 1.67V in 10mV steps or 1V to 3.575V in 25mV steps or Fixed 5V outputThree variable-output voltage synchronous step-down converters with dcs-control topologyVIN range from 3V to 5.5VUp to 3 A of output currentI2C DVS control from 0.425V to 3.575V in 25mV stepsThree LDO regulators with adjustable output voltageLDOA1: I2C-selectable voltage from 1.35V to 3.3V for up to 200mA of output currentLDOA2 and LDOA3: I2C-selectable voltage from 0.7V to 1.5V for up to 600mA of output current eachVTT LDO for DDR memory terminationThree load switches with slew rate controlUp to 300mA of output current with voltage drop less than 1.5% of nominal input voltageRDSON < 96mΩ at input voltage of 1.8V5V fixed-output voltage LDO (LDO5)Power supply for gate drivers of SMPS and for LDOA1Automatic switch to external 5V buck for higher efficiencyBuilt-in flexibility and configurability by OTP programmingSix GPI pins configurable to enable (CTL1 to CTL6) or sleep mode entry (CTL3 and CTL6) of any selected railsFour GPO pins configurable to power good of any selected railsOpen-drain interrupt output pinI2C interface supports standard mode (100kHz), fast mode (400kHz), and fast mode plus (1MHz)Two banks of one-time programmable memory for programming default voltages and sequenceWide VIN range from 5.6V to 21VThree variable-output voltage synchronous step-down controllers with D-CAP2™ TopologyScalable output current using external fets with selectable current limitI2C DVS control from 0.41V to 1.67V in 10mV steps or 1V to 3.575V in 25mV steps or Fixed 5V outputThree variable-output voltage synchronous step-down converters with dcs-control topologyVIN range from 3V to 5.5VUp to 3 A of output currentI2C DVS control from 0.425V to 3.575V in 25mV stepsThree LDO regulators with adjustable output voltageLDOA1: I2C-selectable voltage from 1.35V to 3.3V for up to 200mA of output currentLDOA2 and LDOA3: I2C-selectable voltage from 0.7V to 1.5V for up to 600mA of output current eachVTT LDO for DDR memory terminationThree load switches with slew rate controlUp to 300mA of output current with voltage drop less than 1.5% of nominal input voltageRDSON < 96mΩ at input voltage of 1.8V5V fixed-output voltage LDO (LDO5)Power supply for gate drivers of SMPS and for LDOA1Automatic switch to external 5V buck for higher efficiencyBuilt-in flexibility and configurability by OTP programmingSix GPI pins configurable to enable (CTL1 to CTL6) or sleep mode entry (CTL3 and CTL6) of any selected railsFour GPO pins configurable to power good of any selected railsOpen-drain interrupt output pinI2C interface supports standard mode (100kHz), fast mode (400kHz), and fast mode plus (1MHz)
Description
AI
The TPS650861 device family is a single-chip power-management IC (PMIC) designed to be programmed for optimal output voltages and sequencing. The TPS650861 has three controllers to provide flexible power capable of up to 30A with large external FETs for high power designs but which can scale down in both size and cost for smaller designs. Combined with three 3A converters, three general purpose LDOs, a termination LDO for DDR, and three load switches, the TPS650861 can provide system power for a wide variety of applications. The D-CAP2™ and DCS-Control high-frequency voltage regulators use small passives to achieve a small solution size. The D-CAP2 and DCS-Control topologies have excellent transient response performance, ideal for processor core and system memory rails that have fast load switching. The device has two banks of one-time programmable (OTP) memory. For large volume opportunities, please contact a local TI sales representative to determine if use of TI’s manufacturing for a custom OTP is available. Third party distributors may also support programming of the TPS650861.
The TPS650861 device family is a single-chip power-management IC (PMIC) designed to be programmed for optimal output voltages and sequencing. The TPS650861 has three controllers to provide flexible power capable of up to 30A with large external FETs for high power designs but which can scale down in both size and cost for smaller designs. Combined with three 3A converters, three general purpose LDOs, a termination LDO for DDR, and three load switches, the TPS650861 can provide system power for a wide variety of applications. The D-CAP2™ and DCS-Control high-frequency voltage regulators use small passives to achieve a small solution size. The D-CAP2 and DCS-Control topologies have excellent transient response performance, ideal for processor core and system memory rails that have fast load switching. The device has two banks of one-time programmable (OTP) memory. For large volume opportunities, please contact a local TI sales representative to determine if use of TI’s manufacturing for a custom OTP is available. Third party distributors may also support programming of the TPS650861.