TMP435 Series
Multi-Address Remote and Local Temp Sensor with Automatic Beta, N-Factor and Series-R Correction
Manufacturer: Texas Instruments
Catalog(1 parts)
| Part | Sensing Temperature - Remote▲▼ | Sensing Temperature - Remote▲▼ | Package / Case | Sensing Temperature - Local▲▼ | Sensing Temperature - Local▲▼ | Resolution▲▼ | Voltage - Supply▲▼ | Voltage - Supply▲▼ | Accuracy - Highest (Lowest)▲▼ | Accuracy - Highest (Lowest)▲▼ | Mounting Type | Output Type | Supplier Device Package | Features | Test Condition▲▼ | Test Condition▲▼ | Test Condition▲▼ | Test Condition▲▼ | Operating Temperature▲▼ | Operating Temperature▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
-64 °C | 191 °C | 10-MSOP, 10-TFSOP | 125 °C | -40 °C | 12 b | 2.700000047683716 V | 5.5 V | 1 °C, 2.5 °C | -2.5 °C, -1 °C | Surface Mount | SMBus | 10-VSSOP | One-Shot, Output Switch, Programmable Limit, Programmable Resolution, Shutdown Mode | 0 °C | 100 °C | -40 °C | 125 °C | 125 °C | -40 °C |
Key Features
• ±1°C REMOTE DIODE SENSOR±1°C LOCAL TEMPERATURE SENSORAUTOMATIC BETA COMPENSATIONn-FACTOR CORRECTIONPROGRAMMABLE THRESHOLD LIMITSTWO-WIRE/SMBus SERIAL INTERFACEMINIMUM AND MAXIMUM TEMPERATURE MONITORSMULTIPLE INTERFACE ADDRESSESALERT/THERM2PIN CONFIGURATIONDIODE FAULT DETECTIONPIN-PROGRAMMABLE TWO-WIRE ADDRESSINGAPPLICATIONSLCD/DLP/LCOS PROJECTORSSERVERSINDUSTRIAL CONTROLLERSCENTRAL OFFICE TELECOM EQUIPMENTDESKTOP AND NOTEBOOK COMPUTERSSTORAGE AREA NETWORKS (SAN)INDUSTRIAL AND MEDICAL EQUIPMENTPROCESSOR/FPGA TEMPERATURE MONITORINGDLP is a registered trademark of Texas Instruments.SMBus is a trademark of Intel Corporation.All other trademarks are the property of their respective owners.±1°C REMOTE DIODE SENSOR±1°C LOCAL TEMPERATURE SENSORAUTOMATIC BETA COMPENSATIONn-FACTOR CORRECTIONPROGRAMMABLE THRESHOLD LIMITSTWO-WIRE/SMBus SERIAL INTERFACEMINIMUM AND MAXIMUM TEMPERATURE MONITORSMULTIPLE INTERFACE ADDRESSESALERT/THERM2PIN CONFIGURATIONDIODE FAULT DETECTIONPIN-PROGRAMMABLE TWO-WIRE ADDRESSINGAPPLICATIONSLCD/DLP/LCOS PROJECTORSSERVERSINDUSTRIAL CONTROLLERSCENTRAL OFFICE TELECOM EQUIPMENTDESKTOP AND NOTEBOOK COMPUTERSSTORAGE AREA NETWORKS (SAN)INDUSTRIAL AND MEDICAL EQUIPMENTPROCESSOR/FPGA TEMPERATURE MONITORINGDLP is a registered trademark of Texas Instruments.SMBus is a trademark of Intel Corporation.All other trademarks are the property of their respective owners.
Description
AI
The TMP435 is a remote temperature sensor monitor with a built-in local temperature sensor. The remote temperature sensor diode-connected transistors are typically low-cost, NPN- or PNP-type transistors or diodes that are an integral part of microcontrollers, microprocessors, or FPGAs.
Remote accuracy is ±1°C for multiple IC manufacturers, with no calibration needed. The two-wire serial interface accepts SMBus write byte, read byte, send byte, and receive byte commands to program the alarm thresholds and to read temperature data.
The TMP435 includes beta compensation (correction), series resistance cancellation, programmable non-ideality factor, programmable resolution, programmable threshold limits, minimum and maximum temperature monitors, wide remote temperature measurement range (up to +150°C), diode fault detection, a temperature alert function, and pin-programmable two-wire addressing using 3-state logic.
The TMP435 is available in an MSOP-10 package.
The TMP435 is a remote temperature sensor monitor with a built-in local temperature sensor. The remote temperature sensor diode-connected transistors are typically low-cost, NPN- or PNP-type transistors or diodes that are an integral part of microcontrollers, microprocessors, or FPGAs.
Remote accuracy is ±1°C for multiple IC manufacturers, with no calibration needed. The two-wire serial interface accepts SMBus write byte, read byte, send byte, and receive byte commands to program the alarm thresholds and to read temperature data.
The TMP435 includes beta compensation (correction), series resistance cancellation, programmable non-ideality factor, programmable resolution, programmable threshold limits, minimum and maximum temperature monitors, wide remote temperature measurement range (up to +150°C), diode fault detection, a temperature alert function, and pin-programmable two-wire addressing using 3-state logic.
The TMP435 is available in an MSOP-10 package.