65LVDS84 Series
Flatlink™ low-voltage differential signal (LVDS) transmitter
Manufacturer: Texas Instruments
Catalog(1 parts)
| Part | Grade | Type | Voltage - Supply▲▼ | Voltage - Supply▲▼ | Qualification | Protocol | Supplier Device Package | Mounting Type | Package / Case▲▼ | Package / Case | Package / Case▲▼ | Operating Temperature▲▼ | Operating Temperature▲▼ | Number of Drivers/Receivers▲▼ | Number of Drivers/Receivers▲▼ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Automotive | Driver | 3.5999999046325684 V | 3 V | AEC-Q100 | LVDS | 48-TSSOP | Surface Mount | 0.006099999882280827 m | 48-TFSOP | 0.006095999851822853 m | 125 °C | -40 °C | 0 ul | 4 ul |
Key Features
• 21:3 Data Channel Compression at up to 196 Million Bytes per Second ThroughputSuited for SVGA, XGA, or SXGA Data Transmission From Controller to Display With Very Low EMI21 Data Channels Plus Clock In Low-Voltage TTL Inputs and 3 Data Channels Plus Clock Out Low-Voltage Differential Signaling (LVDS) OutputsOperates From a Single 3.3-V Supply and 89 mW (Typ)Ultralow-Power 3.3-V CMOS Version of the SN75LVDS84. Power Consumption About One Third of the 'LVDS84Packaged in Thin Shrink Small-Outline Package (TSSOP) With 20 Mil Terminal PitchConsumes Less Than 0.54 mW When DisabledWide Phase-Lock Input Frequency Range: 31 MHz to 75 MHzNo External Components Required for PLLOutputs Meet or Exceed the Requirements of ANSI EIA/TIA-644 StandardSSC Tracking Capability of 3% Center Spread at 50-kHz Modulation FrequencyImproved Replacement for SN75LVDS84 and NSC's DS90CF363A 3-V DeviceAvailable in Q-Temp AutomotiveHigh Reliability Automotive ApplicationsConfiguration Control / Print SupportQualification to Automotive StandardsFlatLink is a trademark of Texas Instruments.21:3 Data Channel Compression at up to 196 Million Bytes per Second ThroughputSuited for SVGA, XGA, or SXGA Data Transmission From Controller to Display With Very Low EMI21 Data Channels Plus Clock In Low-Voltage TTL Inputs and 3 Data Channels Plus Clock Out Low-Voltage Differential Signaling (LVDS) OutputsOperates From a Single 3.3-V Supply and 89 mW (Typ)Ultralow-Power 3.3-V CMOS Version of the SN75LVDS84. Power Consumption About One Third of the 'LVDS84Packaged in Thin Shrink Small-Outline Package (TSSOP) With 20 Mil Terminal PitchConsumes Less Than 0.54 mW When DisabledWide Phase-Lock Input Frequency Range: 31 MHz to 75 MHzNo External Components Required for PLLOutputs Meet or Exceed the Requirements of ANSI EIA/TIA-644 StandardSSC Tracking Capability of 3% Center Spread at 50-kHz Modulation FrequencyImproved Replacement for SN75LVDS84 and NSC's DS90CF363A 3-V DeviceAvailable in Q-Temp AutomotiveHigh Reliability Automotive ApplicationsConfiguration Control / Print SupportQualification to Automotive StandardsFlatLink is a trademark of Texas Instruments.
Description
AI
The SN75LVDS84A and SN65LVDS84AQ FlatLink transmitters contains three 7-bit parallel-load serial-out shift registers, and four low-voltage differential signaling (LVDS) line drivers in a single integrated circuit. These functions allow 21 bits of single-ended LVTTL data to be synchronously transmitted over 3 balanced-pair conductors for receipt by a compatible receiver, such as the SN75LVDS82 or SN75LVDS86/86A.
When transmitting, data bits D0 - D20 are each loaded into registers of the 'LVDS84A upon the falling edge. The internal PLL is frequency-locked to CLKIN and then used to unload the data registers in 7-bit slices. The three serial streams and a phase-locked clock (CLKOUT) are then output to LVDS output drivers. The frequency of CLKOUT is the same as the input clock, CLKIN.
The 'LVDS84A requires no external components and little or no control. The data bus appears the same at the input to the transmitter and output of the receiver with the data transmission transparent to the user(s). The only user intervention is the possible use of the shutdown/clear (SHTDN\) active-low input to inhibit the clock and shut off the LVDS output drivers for lower power consumption. A low-level on this signal clears all internal registers to a low level.
The SN75LVDS84A is characterized for operation over ambient free-air temperatures of 0°C to 70°C. The SN65LVDS84AQ is characterized for operation over the full Automotive temperature range of -40°C to 125°C.
The SN75LVDS84A and SN65LVDS84AQ FlatLink transmitters contains three 7-bit parallel-load serial-out shift registers, and four low-voltage differential signaling (LVDS) line drivers in a single integrated circuit. These functions allow 21 bits of single-ended LVTTL data to be synchronously transmitted over 3 balanced-pair conductors for receipt by a compatible receiver, such as the SN75LVDS82 or SN75LVDS86/86A.
When transmitting, data bits D0 - D20 are each loaded into registers of the 'LVDS84A upon the falling edge. The internal PLL is frequency-locked to CLKIN and then used to unload the data registers in 7-bit slices. The three serial streams and a phase-locked clock (CLKOUT) are then output to LVDS output drivers. The frequency of CLKOUT is the same as the input clock, CLKIN.
The 'LVDS84A requires no external components and little or no control. The data bus appears the same at the input to the transmitter and output of the receiver with the data transmission transparent to the user(s). The only user intervention is the possible use of the shutdown/clear (SHTDN\) active-low input to inhibit the clock and shut off the LVDS output drivers for lower power consumption. A low-level on this signal clears all internal registers to a low level.
The SN75LVDS84A is characterized for operation over ambient free-air temperatures of 0°C to 70°C. The SN65LVDS84AQ is characterized for operation over the full Automotive temperature range of -40°C to 125°C.